DirecTV DCAW1R0-01
DirecTV DCAW1R0-01
Availability: now
Manuf (OEM/ODM): Wistron NeWeb
Type: STB bridge
FCC ID: NKR-DTVDCCK
PCB ID: 48.J7152.0GA
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: AMCC PowerPC 405EX (400 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX29GL128ELT2I-90G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Hynix H5PS5162FFR-Y5C)
Expansion IFs: Mini PCIe
Mini PCIe slots: 1
JTAG: looks like it, 16-pin header, unpopulated, J19
Serial: yes, internal, 4-pin header, unpopulated, pinout marked, 3.3V TTL, (115200,8,N,1), J4
WI1 module: DirecTV DCAW1R0-01 Wireless Module
WI1 module IF: Mini PCIe
WI1 chip1: Lantiq PSB 8231
WI1 chip2: Lantiq PSB 8301
WI1 802dot11 protocols: abgn
WI1 MIMO config: 3x3:2
WI1 antenna connector: U.FL
ETH chip1: AMCC PowerPC 405EX
ETH chip2: Marvell 88E6031
LAN speed: 100M
LAN ports: 1
abgn
Additional chips
2.4/5GHz Front End Module;Skyworks;SE2593;SiGe, 2593A20, 033AHHF;3;
MoCA 1.0 controller;Entropic Communications;EN2210;ENTROPIC, EN2210-BG2, U5336AGA, 1031 KOREA;1;
MoCA transciever;Entropic Communications;EN1212;ENTROPIC, EN1212C1, 100000113, 1314;1;
Stock bootloader: U-Boot
Stock FW OS: Linux 2.6.33
Flags: MoCA 1.0, manual GPL request needed
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 0 are DirecTV devices
802dot11 OUI: 30:14:4A (1 E, 2 W), A8:54:B2 (-, 7 W)
Ethernet OUI: 30:14:4A (1 E, 2 W), A8:54:B2 (-, 7 W)
FCC ID | |
---|---|
DirecTV DCAW1R0-01 Wireless Module | NKR-DTVDCCK |
DirecTV DCAW1R1-01 | NKR-DTVDCCKII NKR-DTVDCCK |
For a list of all currently documented Applied Micro (AMCC) SoC's with specifications, see Applied Micro.
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
STB Bridge
- This unit is part of the DirecTV Cinema Connection Kit.
"48.J7152.0GA" and "2010/11/24" is silkscreened on a production model board.
"48.J7151.SGE" and "2010/10/07" is silkscreened on the back of the WAVE300
- mPCIe module in the FCC photos.
The PCI ID of the WAVE300 card is 1a30:0710 (1a30:0711).
Wi-Fi Certified : WFA10841 (as of 02/18/2011)
Serial
Info derived from
• boot log |
---|
U-Boot 2009.11.1 (Feb 17 2012 - 17:18:30) CPU: AMCC PowerPC 405EXr Rev. D at 400 MHz (PLB=200 OPB=100 EBC=100) No Security support Bootstrap Option C - Boot ROM Location EBC (16 bits) 16 kB I-Cache 16 kB D-Cache Board: DeCA - AMCC 405EX WNC Board. VCO: 800 MHz CPU: 400 MHz PLB: 200 MHz OPB: 100 MHz DDR: 200 MHz DRAM: 64 MB (ECC not enabled, 400 MHz, CL3) FLASH: 16 MB PCI: Bus Dev VenId DevId Class Int PCIE0: successfully set as root-complex 01 00 1a30 0710 0d80 ff Net: ppc_4xx_eth0 Type run flash_nfs to mount root filesystem over NFS Hit any key to stop autoboot: 0 ##EnvFlashFirmwareState:111 ## Booting kernel from Legacy Image at ff000000 ... Image Name: Linux-2.6.33 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1951506 Bytes = 1.9 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at ff200000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 5574656 Bytes = 5.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at ff1e0000 Booting using the fdt blob at 0xff1e0000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Loading Ramdisk to 03958000, end 03ea9000 ... OK Loading Device Tree to 00ffb000, end 00fff896 ... OK Using PowerPC 40x Platform machine description Linux version 2.6.33 (felicia@ubuntuJHR330) (gcc version 4.3.4 (crosstool-NG-1.6.1) ) #1 Wed Dec 5 16:37:03 CST 2012 Found initrd at 0xc3958000:0xc3ea9000 Zone PFN ranges: DMA 0x00000000 -> 0x00004000 Normal 0x00004000 -> 0x00004000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00004000 MMU: Allocated 1088 bytes of context maps for 255 contexts Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: root=/dev/ram rw ip=192.168.2.1:::255.255.255.0:deca:eth0:off panic=1 console=ttyS0,115200 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 55296k/65536k available (3904k kernel code, 10172k reserved, 148k data, 78k bss, 140k init) Kernel virtual memory layout: * 0xfffdf000..0xfffff000 : fixmap * 0xfde00000..0xfe000000 : consistent mem * 0xfde00000..0xfde00000 : early ioremap * 0xc5000000..0xfde00000 : vmalloc & ioremap SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 nr_irqs:512 UIC0 (32 IRQ sources) at DCR 0xc0 UIC1 (32 IRQ sources) at DCR 0xd0 UIC2 (32 IRQ sources) at DCR 0xe0 clocksource: timebase mult[a00000] shift[22] registered Mount-cache hash table entries: 512 NET: Registered protocol family 16 PCIE0: Checking link... PCIE0: Device detected, waiting for link... PCIE0: link is up ! PCI host bridge /plb/pciex@0a0000000 (primary) ranges: MEM 0x0000000090000000..0x0000000097ffffff -> 0x0000000080000000 IO 0x00000000e0000000..0x00000000e000ffff -> 0x0000000000000000 4xx PCI DMA offset set to 0x00000000 PCIE0: successfully set as root-complex PCI: Probing PCI hardware PCI: Hiding 4xx host bridge resources 0000:00:00.0 pci 0000:00:00.0: PCI bridge to [bus 01-3f] pci 0000:00:00.0: disabling bridge window [io 0x0000-0x0fff] to [bus 01-3f] (unused) pci 0000:00:00.0: disabling bridge window [mem 0xa0000000-0xa0ffffff] to [bus 01-3f] (unused) pci 0000:00:00.0: BAR 9: assigned [mem 0x90000000-0x90bfffff pref] pci 0000:01:00.0: BAR 1: assigned [mem 0x90000000-0x907fffff pref] pci 0000:01:00.0: BAR 1: set to [mem 0x90000000-0x907fffff pref] (PCI address [0x80000000-0x807fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x90800000-0x90800fff pref] pci 0000:01:00.0: BAR 0: set to [mem 0x90800000-0x90800fff pref] (PCI address [0x80800000-0x80800fff] pci 0000:00:00.0: PCI bridge to [bus 01-3f] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem disabled] pci 0000:00:00.0: bridge window [mem 0x90000000-0x90bfffff pref] bio: create slab <bio-0> at 0 cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource timebase Switched to NOHz mode on CPU #0 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (junk in compressed archive); looks like an initrd irq 26: nobody cared (try booting with the "irqpoll" option) Call Trace: [c3429a10] [c0006e94] show_stack+0x40/0x15c (unreliable) [c3429a40] [c0057c80] __report_bad_irq+0x34/0xbc [c3429a60] [c0057ed4] note_interrupt+0x1cc/0x228 [c3429a90] [c0058bec] handle_level_irq+0xec/0x120 [c3429aa0] [c0019da4] uic_irq_cascade+0xf4/0x11c [c3429ac0] [c0004ebc] do_IRQ+0x98/0xb4 [c3429ae0] [c000f51c] ret_from_except+0x0/0x18 [c3429ba0] [00000020] 0x20 [c3429be0] [c0004dd0] do_softirq+0x78/0x84 [c3429bf0] [c002ca78] irq_exit+0x7c/0x9c [c3429c00] [c0004ec0] do_IRQ+0x9c/0xb4 [c3429c20] [c000f51c] ret_from_except+0x0/0x18 [c3429ce0] [00001000] 0x1000 [c3429cf0] [c005b4f4] generic_file_buffered_write+0xa4/0x260 [c3429d70] [c005d4ec] __generic_file_aio_write+0x24c/0x474 [c3429df0] [c005d784] generic_file_aio_write+0x70/0xe8 [c3429e20] [c008adbc] do_sync_write+0xa8/0x11c [c3429ec0] [c008b9fc] vfs_write+0xb4/0x188 [c3429ee0] [c008bbd8] sys_write+0x4c/0xa4 [c3429f10] [c03aff24] populate_rootfs+0x208/0x23c [c3429fa0] [c000236c] do_one_initcall+0x3c/0x1e0 [c3429fd0] [c03ad1e4] kernel_init+0xc4/0x130 [c3429ff0] [c000ecc0] kernel_thread+0x4c/0x68 handlers: [<c001b7d0>] (button4_interrupt_handler+0x0/0x28) Disabling IRQ #26 Freeing initrd memory: 5444k freed ppc4xx-msi driver active MSI reg base ef620000 - ef6200ff MSI sdr base 000004b0 MSI PE_IHS h 00000000 l ef620002 squashfs: version 4.0 (2009/01/31) Phillip Lougher JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 118 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered (default) ppc4xx_msi:ppc4xx_msi_check_device called. vec 1 type 5 pcie vendor aaa0 hwirq requested 0, virt 38 message: h 00000000 l 02df3000 data 00004440 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0xef600200 (irq = 19) is a 16550A console [ttyS0] enabled ef600200.serial: ttyS0 at MMIO 0xef600200 (irq = 19) is a 16550 brd: module loaded ff000000.nor_flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 ff000000.nor_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 RedBoot partition parsing not available Creating 10 MTD partitions on "ff000000.nor_flash": 0x000000000000-0x000001000000 : "NOR flash 16MiB, 128kb sector size" 0x000000000000-0x0000001e0000 : "kernel1" 0x0000001e0000-0x000000200000 : "device-tree1" 0x000000200000-0x000000760000 : "squashfs1" 0x000000760000-0x000000940000 : "kernel2" 0x000000940000-0x000000960000 : "device-tree2" 0x000000960000-0x000000ec0000 : "squashfs2" 0x000000ec0000-0x000000f80000 : "SystemConfig" 0x000000f80000-0x000000fa0000 : "env" 0x000000fa0000-0x000001000000 : "u-boot" PPC 4xx OCP EMAC driver, version 3.54 MAL v2 /plb/mcmal, 2 TX channels, 2 RX channels eth0: EMAC-0 /plb/opb/ethernet@ef600900, MAC a8:54:b2:81:b6:c6 eth0: found Marvell 88E6031 Ethernet PHY (0x10) eMac MII Bus: probed i2c /dev entries driver Registered led device: led3 Registered led device: led4 Registered led device: led5 Registered led device: led6 Registered led device: led7 Registered led device: led9 Registered led device: led10 TCP cubic registered NET: Registered protocol family 17 Distributed Switch Architecture driver version 0.1 eth0[0]: detected a Marvell 88E6031 switch dsa slave smi: probed eth0: link is up, 100 FDX IP-Config: Complete: device=eth0, addr=192.168.2.1, mask=255.255.255.0, gw=255.255.255.255, host=deca, domain=, nis-domain=(none), bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= RAMDISK: squashfs filesystem found at block 0 RAMDISK: Loading 5444KiB [1 disk] into ram disk... done. VFS: Mounted root (squashfs filesystem) readonly on device 1:0. Freeing unused kernel memory: 140k init ______________________________________________________________ .-----.----.-----.-----.-----.--.--.--.---.-.--.--.-----. | _ | _| -__| -__| | | | | _ | | | -__| |___ |__| |_____|_____|__|__|________|___._|\___/|_____| |_____| __ __ __ .----.-----.---.-.| |__| |_.--.--. | _| -__| _ || | | _| | | |__| |_____|___._||__|__|____|___ | |_____| ______________________________________________________________ Booting: deca, Version: 0.0.28 ______________________________________________________________ * Mounting sys filesystem: [ OK ] * Mounting proc filesystem: [ OK ] * Mounting tmpfs filesystem: [ OK ] * Starting syslogd: [ OK ] * Starting kernel logger: [ OK ] * Creating basic nodes: [ OK ] * Loading kernel modules: [ OK ] * Using netlink for hotplug events: [ OK ] * Starting udev daemon: [ OK ] * Populating /dev with existing devices: [ OK ] * Letting udev process events: [ OK ] * Mounting filesystems: [ OK ] * Mounting SystemConfig: * Starting interface : in station mode start drvhlpr --- brctl: bridge br0: No such device [FAILED] * Starting interface br0: * Adding lan * Adding clink0 * Adding wlan0 dhcp route: SIOCDELRT: No such process Configuring link local ip 169.254.1.100init br0 udhcpc (v1.15.3) started [ OK ] dhcp_args= deconfig * Deconfiguring br0: [ OK ] * Updating resolv.conf: [ OK ] * Starting wpa_supplicant:Sending discover... * Starting hostapd: wifi in station mode. exiting [ OK ] * Starting mini_httpd: [ OK ] * Starting leif:firmware update offset 0x760000 [ OK ] |