Embarq EQ-660R
Embarq EQ-660R
Manuf (OEM/ODM): ZyXEL
(Est.) release date: July 2007
Country of manuf.: China
Type: dsl modem
Power: 9 VAC ~ ? Hz, 1 A
Connector type: barrel
CPU1: Texas Instruments TNETD7200
FLA1: 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX29LV160CBTC-70G)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W9864G6GH-7)
Expansion IFs: none specified
Serial: yes, internal, 5-pin header, populated, 3.3V TTL, (9600,8,N,1), J1
ETH chip1: Texas Instruments TNETD7200
LAN speed: 100M
LAN ports: 1
Stock bootloader: Bootbase V1.03
Stock FW OS: ZyNOS V3.40(ACZ.8)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 0 are Embarq devices
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
EQ-660R ADSL Router
The ZyXEL logo, "45-401-000471", "Made in China", and a date code of 0722 is silkscreened on one EQ-660R's board.
Serial
Pinout
The same pinout is used by the ZyXEL HomeSafe 100W (HS-100W).
[3.3] (TxD) (RxD) (GND) J1
Credentials
The default console password is 1234.
Boot log w/ reset
Bootbase Version: V1.03 | 05/25/2005 03:15:00 RAM: Size = 16384 Kbytes FLASH: AMD 16M *1 ZyNOS Version: V3.40(ACZ.8) | 06/11/2007 20:38:00 Press any key to enter debug mode within 3 seconds. ............................................................ Restore default Romfile............. Console speed will be changed to 9600 bps Copyright (c) 1994 - 2004 ZyXEL Communications Corp. initialize ch = 0, ethernet address: 00:19:cb:28:32:40 Wan Channel init ........ done ................................................................................................... done Press ENTER to continue...