EnGenius EAP600
EnGenius EAP600
Manuf (OEM/ODM): Senao
Type: access point
FCC ID: A8J-EAP600
IC ID: 10103A-EAP600
Power: 12 VDC, 2 A
Connector type: barrel
PoE tag: 802.3af, standard
CPU1: Atheros AR9344
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5TU32M16DG-AC × 2)
Expansion IFs: none specified
WI1 chip1: Atheros AR9344
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Atheros AR9382
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: Atheros AR9344
ETH chip2: Atheros AR8035-A
LAN speed: 1G
LAN ports: 1
abgn
Default SSID: EnGeniusXXXXXX-2.4G (1 addl. devices)
, EnGeniusXXXXXX-5G (1 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 20 are EnGenius devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 50 are EnGenius devices
| FCC ID | |
|---|---|
| Open-Mesh MR600 | A8J-EAP600 |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Wireless-N600 Long Range Ceiling Mount Dual Concurrent Access Point
On EnGenius USA
On EnGenius Singapore
Datasheet
This datasheet (on EnGenius USA's site) indicates the device has 8MB Flash and 64MB RAM.
- FCC photos show the device with a MX25L12845EMI-10G Fiash chip (128Mb / 16MB)
- and two NT5TU32M16DG-AC RAM chips (DDR2-800, 64MB each).
"EAP600-0.20 LFP" is silkscreened on the board.
- The device is using a HN2411CG LAN Transformer.
Default settings (including the SSID formats) are per EnGenius's manual.
- The info may not be 100% accurate..
Vendor links
Images
- from EnGenius
main
