EnGenius EAP900
EnGenius EAP900
Manuf (OEM/ODM): Senao
FCC approval date: 25 September 2013
Country of manuf.: Taiwan
Type: access point
FCC ID: A8J-EAP900
IC ID: 10103A-EAP900
Power: 12 VDC, 2.0 A
Connector type: barrel
PoE tag: 802.3af, standard
CPU1: Qualcomm Atheros QCA9558
FLA1: ? MiB (Macronix Model?)
RAM1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5TU32M16DG-AC × 2)
Expansion IFs: none specified
WI1 chip1: Qualcomm Atheros QCA9558
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: EnGenius EMP5608H
WI2 module IF: Mini PCIe (oversized)
WI2 chip1: Atheros AR9580
WI2 802dot11 protocols: an
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Qualcomm Atheros QCA9558
ETH chip2: Atheros AR8035-A
LAN speed: 1G
LAN ports: 1
abgn
Default SSID: EnGeniusXXXXXX-2.4G (1 addl. devices)
, EnGeniusXXXXXX-5G (1 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 20 are EnGenius devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 50 are EnGenius devices
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
Dual Band N900 Indoor Access Point
Per the FCC photos...
- "EAP900-0.30 LFP" is silkscreened on the main board.
- The 2G radio is using three Skyworks (SiGe) SE2576L / 2576L 2.4GHz PAMs.
- "EMP5608H" and "0.20 LFP" is silkscreened on the 5G wireless module.
- The 5G module is using three Skyworks (SiGe) SE5003L / 5003L 5GHz PAMs
- This device appears to be using QCA9558-AT4A.
- The power adapter shown in a Powertron Electronics Corp. PA1024-2HUB / PA1024-120HUB200 (100-240VAC ~ 50-60Hz, 0.6A -> 12VDC, 2.0A - 24W max.).
An additional model of EAP900H (noted as a high-power model) is referenced in the FCC docs.
- The FCC docs note the tested model as EAP900. The devices are stated to be electrically identical and differing only in name for marketing purpose (hmm..).
Default settings are per the FCC manual.
- Default SSID patterns are shown as EnGeniusXXXXXX-2.4G and EnGeniusXXXXXX-5G. This is presumed to be correct.
- The manual shows 88:DC:96 OUIs in use. Again, it's presumed to be in use.
