EnGenius ECB600

EnGenius ECB600 (v1.5)

Manuf (OEM/ODM): Senao

FCC approval date: 28 May 2013
UPC: 655216005846 (UPC DB, On eBay)
Country of manuf.: Taiwan

Amazon image

ASIN
B00CWIKET0 (, On Amazon, On CCC)

Type: access point, bridge

FCC ID: A8J-ECB600
IC ID: 10103A-ECB600
PCB ID: 7016A060700g

Power: 12 VDC, 2 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
PoE tag: 802.3af/at, standard

CPU1: Atheros AR9344
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5TU32M16DG-AC × 2)

Expansion IFs: none specified
JTAG: yes, 14-pin header, populated, H5
Serial: yes, 4-pin header, populated, 3.3V TTL, H1

WI1 chip1: Atheros AR9344
WI1 802dot11 protocols: an
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Atheros AR9382
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL, RP-SMA

ETH chip1: Atheros AR9344
ETH chip2: Atheros AR8035-A
LAN speed: 1GbE
LAN ports: 1

abgn

Additional chips
2.4GHz Power Amplifier IC;Skyworks;SE2576L;;2;
5GHz Power Amplifier IC;Skyworks;SE5003L1;;2;
802.3at PoE Interface and DC/DC Controller;TI;TPS23754;;1;
150V N-Channel MOSFET;Vishay Siliconix;Si4848DY;;3;
1-Channel Photocoupler;LiteOn;LTV-817;;1;

Stock bootloader: U-Boot 1.1.4

Stock FW OS: Linux 2.6.31 OpenWrt Kamikaze

TPFirmware supported: OpenWrt • (List | Dev | DLs)

Flags: SNMP, PoE

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 20 are EnGenius devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 50 are EnGenius devices

802dot11 OUI: 88:DC:96 (21 E, 21 W)
Ethernet OUI: 88:DC:96 (21 E, 21 W)

	FCC ID
pakedge W7	A8J-ECB600

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

---

Dual-Band Long Range Wireless N Indoor Access Point/Client Bridge

Product page  • Datasheet

"ECB600-0.40 LFP" is silkscreened on the board in the FCC photos.

The 5GHz radio (AR9344) is using two Skyworks (SiGe) SE5003L 5GHz Power Amplifier ICs.

Default credentials are per the FCC manual.

The default SSID patterns appear to be EnGeniusXXXXXX-2.4G and EnGeniusXXXXXX-5G.

Images

• 

  Board Top

• 

  Board Bottom