EnGenius EPG600
EnGenius EPG600
Manuf (OEM/ODM): Senao
FCC approval date: 06 January 2014
(Est.) release date: September 2014
UPC: 655216007031 (UPC DB, On eBay)
Country of manuf.: Taiwan
Type: wireless router, analog phone gateway
FCC ID: A8J-EPG600
PCB ID: 7016A0758004
Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
CPU1: MediaTek MT7620A (580 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Nanya NT5TU32M16DG-AC)
Expansion IFs: USB 2.0
USB ports: 1
Serial: yes, 4-pin header
WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Ralink RT5592
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: MediaTek MT7620A
Switch: Qualcomm Atheros QCA8337N
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1
abgn
Additional chips
VoIP chip w/ SPI interface;Silicon Labs;Si3050;Si3050-FT, 1235EM, F127;1;
VoIP line side device;Silicon Labs;Si3019;3019-FT, 1311FF, L0PL;1;
23V, 3A Synchronous Step-Down DC/DC Converter;ITE Tech;IT7663M;;1;
Flags: analog phone port, SNMP
Default SSID: EnGeniusXXXXXX (17 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 27 are EnGenius devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 50 are EnGenius devices
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless Dual Band VoIP Router
"EPG600-0.20 LFP" is silkscrened on the board in the FCC photos.
Default settings are per the FCC manual, default SSIDs (EnGeniusXXXXXX for both bands, 5G = 2.4 MAC + 1) + the 88:DC:96 OUI are per the FCC sample label. They may be inaccurate.
Probable PSUs
The power supply shown in the FCC photos is a Shenzhen Gongjin Electronics S24B12-120A125-04.
Shenzhen Gongjin Electronics S24B12-120A125-04 (more) | |||||
---|---|---|---|---|---|
Input: 100-240 VAC ~ 50/60 Hz, 0.7 A | |||||
Input connector: NEMA 1-15P Style: large, vertical Manuf. in: China | |||||
Output: 12 VDC, 1.25 A | |||||
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? |
Images