EnGenius ESR1750

EnGenius ESR1750

Manuf (OEM/ODM): Senao

FCC approval date: 27 December 2013
(Est.) release date: August 2013
UPC: 655216006447 (UPC DB, On eBay)
Country of manuf.: Taiwan
Series: AC1750

Amazon image

ASIN
B00E5CL6HK (, On Amazon, On CCC)

Type: wireless router

FCC ID: A8JESR1750, A8JESR1200, A8JESR900
IC ID: 10103A-ESR1750

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: Qualcomm Atheros QCA9558 (720 MHz)
FLA1: 16 MiB16,777,216 B 131,072 Kib 16,384 KiB 128 Mib 0.0156 GiB  (Macronix MX25L12845EMI-10G)
RAM1: 256 MiB268,435,456 B 2,097,152 Kib 262,144 KiB 2,048 Mib 0.25 GiB  (Nanya NT5TU64M16DG-AC × 2)

Expansion IFs: USB 2.0, Mini PCIe
Mini PCIe slots: 1
USB ports: 1
Serial: yes, 4-pin header; 3.3V TTL, (115200 8N1)

WI1 chip1: Qualcomm Atheros QCA9558
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: Senao PAC3300
WI2 module IF: Mini PCIe
WI2 chip1: Qualcomm Atheros QCA9880
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL

ETH chip1: Qualcomm Atheros QCA9558
Switch: Qualcomm Atheros QCA8337N
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1

abgn+ac

Additional chips
2.4GHz High-Power High-Gain Power Amplifier;Silicon Storage Technology;SST12LP15A;;3;
3A 23V Step-Down Converter;M3Tek;IT76630M;;1;

Stock bootloader: U-Boot 1.0.0

Stock FW OS: Linux 2.6.31 LSDK-10.1.45

TPFirmware supported: OpenWrt • (List | Dev | DLs)

Default SSID: EnGeniusXXXXX
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 27 are EnGenius devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 50 are EnGenius devices

802dot11 OUI: 88:DC:96 (21 E, 21 W)
Ethernet OUI: 88:DC:96 (21 E, 21 W)

	FCC ID
EnGenius ESR1200	A8JESR1200

	FCC ID
EnGenius ESR900	A8JESR900

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

Dual Band Wireless AC1750 Router

with Gigabit Ports, USB, Quantum Beam, and EnShare

Product page • Datasheet

"ESR1750-0.20 LFP" is silkscreened on the mainboard in the FCC photos.

"PAC3300-0.20 LFP 94V-0 1343" is silkscreened on the wireless module.

The FCC ID on the label on at least some of these devices appears to be A8JESR900.

The newer A8JESR1750 FCC ID was issued before the end of 2013.

The filings for FCC ID do indeed mention the ESR1750 and ESR1200 within the test report…

but only 802.11n rates seem to be tested (there is no mention of 80MHz/VHT modes)

and the photos cover the ESR900 only (w/ its 3x3 11an AR9580 radio).

Default settings (including the SSID formats and the presumed used 88:DC:96 OUI)

are per the FCC sample label.

Additional specifications, per EnGenius's product page, follow...

Weight: 0.5 lbs
Diameter: 6.36"
Height: 1.64"

Reviews

EnGenius Dual Band Wireless AC1750 Cloud Gigabit Router Reviewed on SNB

CPU: Qualcomm Atheros QCA9558 @720MHz 3T3R 802.11n WiSoC
RAM: 128 MB (??), Flash: 16 MB
2.4GHz Radio: Qualcomm Atheros QCA9558

- 2.4 GHz Power Amp SST 12LP15A (x3)

5GHz Radio: Qualcomm Atheros QCA9880

- 5 GHz Power Amp marked 15E37TV (x3)

Switch: Qualcomm Atheros QCA8337

Links

Serial

• Bootlog • >>

U-Boot 1.0.0 (May 23 2013 - 17:15:24)
Product Name: ESR1200_1750
ap136 - Scorpion 1.0
DRAM:256 MB
Now running in RAM - U-Boot at: 8ffc8000
Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18
Flash size 16MB, sector count = 256
In:    serial
Out:   serial
Err:   serial
reset_switch:
reset_usb:
Multi Net:

ath_gmac_enet_initialize...
athrs_sgmii_res_cal: cal value = 0xe
No valid address in Flash. Using fixed address
ath_gmac_enet_initialize: reset mask:c02200
Scorpion  ----> S17 PHY *
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
athrs17_reg_init: SUPPORT_QCA8337
athrs17_reg_init: QCA8337 ID=1302
athrs17_reg_init: complete
eth0 up
eth0
athrs17_disable_all_port
Setting 0x18116290 to 0x60c0214f

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   3: Boot system code via Flash (default).
 0

3: System Boot system code via Flash.
athrs17_set_portvlan_isolated complete
## Booting image at 9f040000 ...
   Image Name:   Linux Kernel Image
   Created:      2013-08-15   6:59:16 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1867435 Bytes =  1.8 MB
   Load Address: 80002000
   Entry Point:  802ad4d0
   Verifying Checksum at 0x9f040040 ...OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

Booting QCA955x
init started: BusyBox v1.7.5 (2013-08-15 14:50:11 CST)
starting pid 807, tty '/dev/console': '/sbin/config_init'
mknod: /dev/ttyS0: File exists
mknod: /dev/ttyS1: File exists
Config Init version: 1.1.0.23 date: 2013/08/15
Tue Jan  1 00:00:00 UTC 2013
ln: /lib/./modules: File exists
starting pid 867, tty '/dev/ttyS0': '/sbin/config_term'
[sysUtil] Hardware ID - 01010062
[sysUtil] Load vendor[1] information

************************************************************************
*                                  ESR1750                             *
************************************************************************

KernelApp/Ramdisk Ver:1.1.0.23                   Date:2013/08/15
password:

EnGenius ESR1750

Dual Band Wireless AC1750 Router

Reviews

Links

Serial

Navigation menu

Search