GL.iNet GL-AR300M
GL.iNet GL-AR300M -EXT (MD/Lite)
FCC approval date: 14 September 2016
(Est.) release date: 2017
Type: travel router
FCC ID: 2AFIW-AR300M
Power: 5 VDC, 1 A
Connector type: USB Female Micro-B
CPU1: Qualcomm Atheros QCA9531 (650 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128FVSG)
FLA2: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (GigaDevice GD5F1GQ4UCYIG)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Etron EM68C16CWQE-W5H)
Expansion IFs: USB 2.0, PCIe (non-standard connector)
USB ports: 1
Serial: yes, 4-pad header
WI1 chip1: Qualcomm Atheros QCA9531
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Qualcomm Atheros QCA9531
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1
bgn
Stock bootloader: U-Boot
Stock FW OS: Linux 3.18.20 OpenWrt 15.05
Default SSID: GL-AR300M-XXX
Default IP address: 192.168.8.1
the IP 192.168.8.1 is used by 39 additional devices
of which 18 are GL.iNet devices
802dot11 OUI: none specified
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
Mini Smart Router
Official Supports
Features
"GL-AR300M-V1.2.0" is silkscreened on the board in the FCC photos.
Specifications
- Interfaces: 1x WAN, 1x LAN, 1x USB2.0, PCIe, UART
- Frequency: 2.4GHz 2T2R (+ 5GHz PCIe Card addon)
- Transmission rate: 300Mbps, Max Tx Power: 20dBm
- Power consumption: <3W (1x micro USB, no PoE)
- Dimensions: 58x58x25 mm, Weight: 39g
Description
The GL-AR300M is the newest in the line of GL.iNet products as of early 2017.
- It is available with internal or external antennas (GL-AR300M-EXT).
It is a compact, squared shaped travel router that runs OpenWrt perfectly.
GL.iNet ships the device with their own version of OpenWrt, but they also
- offer multiple clean OpenWrt images pre-built for their devices at FW.
The AR300M is identical in hardware to the GL.iNet AR300MD, aside from
- the fact that it does not ship with the 5GHz module installed.
Unlike other GL.iNet routers, this model has no PoE support
- (due to the 5GHz module taking up all the extra space).
Power is provided by a Micro USB 5V 1A input.
Images
PCB top
PCB top
PCB top
PCB bottom
PCB bottom
PCB bottom
GL-AR300M Ext Ant
GL-AR300M Ports
GL-AR300M(16)
GL-AR300M(16)
GL-AR300M(16)
GL-AR300M-Lite
GL-AR300M-Ext
GL-AR300M16-Ext
