GL.iNet GL-S1300F16
GL.iNet GL-S1300 F16
FCC approval date: 30 April 2019
Country of manuf.: China
Series: AC1300
Type: wireless system, IoT hub
FCC ID: 2AFIW-S1300
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: Qualcomm IPQ4029 (717 MHz, 4 cores)
CPU2: Silicon Labs EFR32MG
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Brand? Model?)
FLA2: 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (SK hynix H26M41204HPR)
RAM1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Micron MT41K256M16HA-125:E)
Expansion IFs: USB 3.0
USB ports: 1
WI1 chip1: Qualcomm IPQ4029
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Qualcomm IPQ4029
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: none
ETH chip1: Qualcomm IPQ4029
Switch: Qualcomm Atheros QCA8075
LAN speed: 1G
LAN ports: 2
WAN speed: 1G
WAN ports: 1
abgn+ac
Flags: Wave2, 256QAM, MU-MIMO, SON, Bluetooth 5.1 LE, ZigBee
Default SSID: GL-S1300-XXX (1 addl. devices)
Default IP address: 192.168.8.1
the IP 192.168.8.1 is used by 40 additional devices
of which 19 are GL.iNet devices
FCC ID | |
---|---|
GL.iNet GL-S1300 (Convexa-S) | 2AFIW-S1300 |
CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
---|---|---|---|
GL.iNet GL-S1300 (Convexa-S) | Qualcomm | Qualcomm | Qualcomm |
GL.iNet GL-S1300F16 | Qualcomm | Qualcomm | Qualcomm |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Silicon Labs chipsets with specifications, see Silicon Labs.
OpenWrt Gateway for Smart Home Wireless Devices
"GL-S1300_V1.2.2" is silkscreened on the board in the FCC photos.
"D9PXV" Micron FBGA code on the RAM corresponds
- to the MT41K256M16HA-125:E