Geniatech XPI-S905X3
Geniatech XPI-S905 X3 (2GB)
(Est.) release date: November 2021
(Est.) initial retail price (in USD): $42
Country of manuf.: China
Type: single-board computer
FCC ID: none available
PCB ID: RMZ20121203_V1.1
Power: 5 VDC, 1 A
Connector type: USB Female Type-C
CPU1: Amlogic S905X3 (2.0 GHz, 4 cores)
FLA1: 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (Samsung KLM8G1WEPD-B031)
RAM1: 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (Leahkinn LTHS0066GS4-ZPK2)
Expansion IFs: USB 2.0, USB 3.0
USB ports: 4
Serial: yes, 4-pin header, populated, 3.3V TTL
WI1 module: unknown
WI1 module IF: USB (non-standard connector)
WI1 chip1: Marvell (NXP) 88W8897M
WI1 802dot11 protocols: abgn+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
ETH chip1: Amlogic S905X3
ETH chip2: Realtek RTL8211F
LAN speed: 1GbE
LAN ports: 1
abgn+ac
Additional chips
8K Two-Wire Serial EEPROM;Fremont Micro Devices;FT24C08;;1;
4-port USB 2.0 Hub Controller;Genesys Logic;GL852G;;1;
Flags: Bluetooth 4.2 (BLE), HDMI 2.1, Micro SD Card slot, UART, I2C, SPI, GPIO
For a list of all currently documented Amlogic chipsets with specifications, see Amlogic.
For a list of all currently documented Marvell (NXP) chipsets with specifications, see Marvell.
Credit-card-sized Low Cost ARM Single Board Computer with Android and 4K
"RMZ20121203_V1.1" and "2021/12/07" are silkscreened on the board bottom.
Links
- XPI-S905X3/S905X2 4K SBC with 2GB RAM on CNX|Software
- Amlogic S905X based Pi lookalike on LinuxGizmos
Specifications
- CPU: Amlogic S905X3 @2.0GHz
- Quad-Core ARM (Cortex-A55)
- GPU: Mali-G31 MP2 @650MHz
- Memory: 2GB (SDRAM) DDR3L
- Storage: 8GB eMMC 5.1 Flash,
- TF card (max.64GB)/MMC card
- WiFi: Marvell (NXP) 88W8897M
- 802.11abgn/ac (2T2R), BT 4.2 BLE
- USB: 3x USB 2.0 ports, 1x USB 3.0 port
- Network: 1x Gigabit Ethernet ports
- GPIO: 1x 40-pin port
- Power Source: 5V via USB Type-C
Images
Board top
Board bottom
