Google Fiber Network Box (GFRG110)
Google Fiber Network Box (GFRG110A)
Availability: common
Manuf (OEM/ODM): Actiontec
FCC approval date: 13 June 2012
Country of manuf.: China
Type: wireless router, ONT
FCC ID: LNQ802DRN
Power: ? VDC, ? A
Connector type: barrel
CPU1: Marvell 88F6560 (1.2 GHz)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (ESMT F59L1G81A-25TI)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Samsung K4B2G1646C-HCH9)
Expansion IFs: Mini PCIe
Mini PCIe slots: 2
JTAG: yes, 14-pin header, unpopulated,
Serial: yes, 6-pin header, populated, 3.3V TTL, (115200 8N1)
WI1 module: Actiontec 802DRN
WI1 module IF: Mini PCIe (dual)
WI1 chip1: Marvell 88W8764
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: Actiontec 802DRN
WI2 module IF: Mini PCIe (dual)
WI2 chip1: Marvell 88W8764
WI2 802dot11 protocols: an
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Marvell 88F6560
ETH chip2: Marvell 88E1545
Switch: Marvell 88F6560
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1
abgn
Additional chips
2A, 4.2V-16V Synchronous Step-down Converter;MPS;MP1492;;2;
Quadruple 2-Input Positive-And Gate;Texas Instruments;SN74LVC08A;;1;
2A Synchronous Buck Regulator;Alpha & Omega;AOZ1020A;;2;
Flags: GPON, fan, heatsink
FCC ID | |
---|---|
Actiontec 802DRN | LNQ802DRN |
CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
---|---|---|---|
Google Fiber Network Box (GFRG110) | Marvell | Marvell | Marvell |
Google Fiber Network Box (GFRG200) | Mindspeed | Atheros | Qualcomm Atheros |
Google Fiber Network Box Mini (GFMN100) | Qualcomm Atheros | Qualcomm Atheros |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Google Fiber Network Box
Per the source, this device is using 88F6560 (AVANTA family) with 88W8764 radios.
- The firmware is OpenRG based. .. the device seems to be quite similar
- to the Actiontec MI424WR rev I, which is also referenced in the source..
- and thus likely uses an OpenRG based firmware as well (but I don't feel
- like downloading it to confirm this ATM), UBoot bootloader, NAND flash
The main board is silkscreened with "Actiontec" and "06694A" in the FCC photos.
- There is a Marvell GbE Switch / PHY on the board. The SoC is covered by a heatsink.
- As the SoC is AVANTA based, the device is likely using the internal SoC switch core..
Reviews
- These screen shots show that the device is most likely made by Actiontec for Google.
- Per the system information, Platform: Actiontec Rev-K Board
- MACs have been fully censored from Web UI screenshots
- This revision appears to have a Fiber interface (w/ a NeoPhotonics module per
- the FCC images), though this appears to be omitted on production models.
- Views of the Google Fiber boxes, but no label shots of anything of substance.
- Censored label shot with FCC ID (via Reddit) - F8:8F:CA OUI
Serial
Appears to have same 1x6 pin 3.3v 115200 baud UART connector as GFRG100.
Images