Handlink AP-100

Handlink AP-100

Manuf (OEM/ODM): AboCom

FCC approval date: 17 October 2013
Country of manuf.: Taiwan

Type: access point, CPE

FCC ID: TWS-AP-100

Power: 18 VDC, 0.66 A
Connector type: Ethernet (PoE)
PoE tag: non-standard

CPU1: Atheros AR9344
FLA1: 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6406EMI-12G)
RAM1: 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (EtronTech EM68A16CWQB-25H)

Expansion IFs: none specified

WI1 chip1: Atheros AR9344
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Atheros AR9344
LAN speed: 100M
LAN ports: 1

bgn

Flags: hg directional

Default SSID: Superwifi Network X
Default IP address: 10.59.100.1
Default login user: admin
Default login password: admin
admin:admin credentials used by 1322 additional devices
of which 2 are Handlink devices

802dot11 OUI: none specified

	FCC ID
Altai WA1011N-G (C1n)	UCC-WA1011N-G TWS-AP-100

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

---

AP-100 Smart Wi-Fi Access Point
Product page

"M01-"????"-X01" appears to be silkscreened on the board in the FCC photos.

CPU: Atheros AR9344-BC2A
RAM: EtronTech EM68A16CWQB-25H / Winbond W9725G6JB-25

This device is using two Skyworks ( / SiGe) SE2576L / 2576L 2.4GHz Power Amplifier modules.

The hardware of this device would appear to be the same (or very similar to) that of the Altai C1n Super WiFi CPE/AP.

Default settings are per the FCC manual.

The default SSID format is stated to be Superwifi Network + a space + a number between 0 and 7.

A 00:19:BE (Altai) OUI is shown as being used within the manual..