Hawking HNC320G
Hawking HNC320G B2
Manuf (OEM/ODM): Cellvision CAS-330W B2
Type: IP camera
Power: 5 VDC, ? A
Connector type: barrel
CPU1: RDC R2880
FLA1: 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX29LV160BBTC-90)
RAM1: 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (GLT GLT5640L16-7TC)
Expansion IFs: none specified
Serial: yes, internal, (19200,8,N,1), unpopulated, 3.3V TTL, 5-pin header, JP1
WI1 module: Cellvision GLM-100
WI1 module IF: PCI (non-standard connector)
WI1 chip1: Ralink RT2560
WI1 chip2: Ralink RT2525
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: RDC R2880
ETH chip2: Realtek RTL8201CP
LAN speed: 100M
LAN ports: 1
bg
For a list of all currently documented RDC SoC's with specifications, see RDC.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless G Network Camera
"CAS-330W", "REV-B2", and PCB manuf. text (date code is 0530 - July 2005) is silkscreened on the top of the main board. "EPCS330ZA020", "MADE IN TAIWAN", and "CAS330WM2B2" is silkscreened on the bottom.
- "EPWLGMR1X010" and some additional text (date code is 0540 - October 2005) is silkscreened on the wireless module (presumed model is GLM-100 - it's on a label [along w/ the region and MAC] affixed to the RF shield).
- All radial capacitors on the board are Canicon branded. The LDO voltage regulator is an AME AME1084ACDT (AME1084, ACDT, 0530).
- A STMicroelectronics STV0676 CMOS sensor co-processor is on the main board.
- "MADE IN TAIWAN" and "EP-CS390000CA"<...> is silkscreened on the back (visible portion without further disassembly) of the sensor board.
Images
- external
unit top
unit bottom
unit label
- internal
board top, in case, w/ wireless module
board top
R2880 RISC SoC
RAM
RTL8201CP PHY
angled view near power section
Cellvision board text
board bottom
Flash + underside of the two headers
Cellvision label
Cellvision board text
Cellvision board text
partial view of camera side, 1
partial view of camera side, 2
partial view of camera side, underside
wireless module, shield removed
wireless module, underside
Serial
Boot log
RS.....<Ready><pci_status:00 00><wlanini_status:01 00>[MAC: 00 03 1B 56 4F 31][MAC: 00 03 1B 5A 05 13]<wlanini_status:00 00><wlancfg_status:00 00>[Random: 00 8D][system ready.....]
