Intenso Memory 2 Move 1TB Black

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Intenso Memory 2 Move 1TB (BLACK)

EAN: 4034303017805 (UPC DB, On eBay)
Country of manuf.: Germany

Amazon image

ASIN
B00D22UIOG (Flag of the United States.svg, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: mobile NAS

Power: 5 VDC, 1 A
Connector type: USB Female Micro-B

CPU1: Ralink RT5350 (360 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond Model?)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond Model?)

Expansion IFs: USB 3.0, SATA
USB ports: 1

WI1 chip1: Ralink RT5350
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Ralink RT5350
LAN speed: 100M
LAN ports: 1

bgn

Stock FW OS: Linux 2.6.21

Flags: battery, portable

Default login user: admin
Default login password: 00000
admin:00000 credentials used by 2 additional devices
of which 0 are Intenso devices

802dot11 OUI: none specified

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

Intenso Memory 2 Move 2,5" USB 3.0

Product page

Support page | PBrief

GPL Source is available

Take control?

telnet service is enabled - passwords are stored in the passwd file;
user "admin" can read it - maybe its someones brithday? try 20080826 :)
The circuit board has ready-to-solder pins for a serial interface:
4 pads, on the battery side, +Vcc TTL on the square pad, then Txc, then Rxc, then Gnd.
A TTL voltage level (3.3V) to serial (5V), or more commonly USB port adapter such as CP2102 -based plugs, is needed.
  • The default port configuration is: 576008N1, software flow control.
The booting log is dumped on this interface, which is then available for logging in through a standard getty.
Retrieved from "https://wikidevi.wi-cat.ru/index.php?title=Intenso_Memory_2_Move_1TB_Black&oldid=303812"