JCG JHR-N926R
JCG JHR-N926R
Manuf (OEM/ODM): Shenzhen Yichen Technology
FCC approval date: 09 July 2012
Country of manuf.: China
Type: wireless router
FCC ID: HHOYC002
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT3052
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Spansion S29GL032N90TFI04)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Hynix H57V2562GTR-60C)
Expansion IFs: none specified
JTAG: yes
Serial: yes, 4-pin header, unpopulated
WI1 chip1: Ralink RT3052
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
ETH chip1: Ralink RT3052
Switch: Ralink RT3052
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Flags: schematics
Default SSID: JCG-XXXXXX (2 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 7 are JCG devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 8 are JCG devices
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
300Mbps High Power Wireless Router
The FCC test report lists the following additional models as covered by this FCC ID..
- JCG JHR-N926R
- JCG JHR-N936R
- JCG JHR-N946R
- JCG JHR-N956R
- JCG JHR-N966R
- JCG JHR-976R
- JCG JHR-986R
- JCG JHR-996R
Default settings are per the FCC label.
- The default SSID pattern appears to be JCG-XXXXXX where XXXXXX is the last three octets of the BSSID (upper case letters).
Per the FCC documents (and supporting WiGLE data), the 00:E0:4B OUI is presumed to be used.
JTAG
On SMD resistors: R21 (TDO), R23 (TMS), R22 (TDI), R24 (TCLK), R27 (TRST)
Serial
VCC, TX, GND, RX
