Keenetic Lite (KN-1310)

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

ZyXEL Keenetic Lite (KN-1310)
Availability: Keenetic Sprinter

Manuf (OEM/ODM): TP-LINK

Country of manuf.: China
Series: N300

Type: wireless router

FCC ID: none available
PCB ID: 2050501028

Power: 9 VDC, 0.6 A
Connector type: barrel

CPU1: MediaTek MT7628NN (575 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (GigaDevice GD25Q128CSIG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (ESMT M14D5121632A)

Expansion IFs: none specified
Serial: yes, 4-pin header, (57600 8N1)

WI1 chip1: MediaTek MT7628NN
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: MediaTek MT7628NN
Switch: MediaTek MT7628NN
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

Stock bootloader: U-Boot 1.1.3

Stock FW OS: Linux

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1305 additional devices
of which 96 are ZyXEL devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 346 additional devices
of which 9 are ZyXEL devices

802dot11 OUI: 50:FF:20 (5 E, 5 W)
Ethernet OUI: 50:FF:20 (5 E, 5 W)

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

N300 Mesh Wi-Fi Router/Extender with 5-Port Smart Switch

Product page (KN-1310) • Product page (KN-1311) • Product page (EN)
See also: ZyXEL/Keenetic series

Reviews

PCB ID: 2050501028 (TP-LINK)

Serial

 • TFTP • >> 
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'KN-1310_recovery.bin'.
 • Bootlog (KN-1310_stable_3.03.C.10.0-0 version firmware 2020-02-13) • >> 
U-Boot 1.1.3 [4.0.0.4-10] (Nov 22 2017 - 08:09:18)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 83fb0000

MediaTek SPI BBU flash driver, SPI clock: 32MHz
flash manufacture id: ef, device id 40 18
find flash: W25Q128BV
============================================
Ralink UBoot Version: 4.0.0.4_NDMS
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Nov 22 2017  Time:08:09:18
============================================
icache: sets:512, ways:4, linesz:32, total:65536
dcache: sets:256, ways:4, linesz:32, total:32768

 ##### The CPU freq = 580 MHZ ####
 estimate memory size = 64 Mbytes

Resetting MT7628 PHY...
Dual image:     on
Boot active:    1
Boot backup:    2
Boot fails:     0


Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Enter boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial.
   9: Load Boot Loader code then write to Flash via TFTP.
 0
3: System Boot system code via Flash.
## Booting image at bc050000 ...
   Image Name:   KN-1310
   Created:      2020-02-13  14:39:38 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1357991 Bytes =  1.3 MB
   Load Address: 80000000
   Entry Point:  802f93a8
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 802f93a8) ...
## Giving linux memsize in MB, 64

Starting kernel ...
+
LINUX started...
Linux version 4.9-ndm-4 (developers@ndmsystems.com) (gcc version 8.3.0 (crosstool-NG 1.24.0-rc2-ndm-7 - NDMS Toolkit 1.0.0) ) #2 Mon Feb 10 19:31:14 MSK 2020
MediaTek SoC: MT7628A, RevID: 0102, RAM: DDR2, XTAL: 40MHz
CPU/OCP/SYS frequency: 580/193/193 MHz
SoC power status: Hard reset occured
CPU0 revision is: 00019655 (MIPS 24KEc)
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Zone ranges:
  Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS0,57600n8
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Writing ErrCtl register=00078cfb
Readback ErrCtl register=00078cfb
Memory: 60792K/65536K available (3037K kernel code, 247K rwdata, 572K rodata, 136K init, 83K bss, 4744K reserved, 0K cma-reserved)
NR_IRQS:40
Setting up vectored interrupts
clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
console [ttyS0] enabled
Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
NET: Registered protocol family 16
clocksource: Switched to clocksource MIPS
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
Load Ralink WDG Timer Module
workingset: timestamp_bits=29 max_order=14 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
io scheduler noop registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
Registering NDM partitions parser
MediaTek BBU SPI flash driver, SPI clock: 32MHz
SPI flash chip: W25Q128FV (ef 40180000) (16384 Kbytes)
Bootloader is up to date
di: active = 1, backup = 2, current = 1
14 ndmpart partitions found on MTD device raspi
Creating 14 MTD partitions on "raspi":
0x000000000000-0x000000030000 : "U-Boot"
0x000000030000-0x000000040000 : "U-Config"
0x000000040000-0x000000050000 : "RF-EEPROM"
0x000000050000-0x0000001b0000 : "Kernel_1"
0x0000001b0000-0x0000007e0000 : "RootFS_1"
mtd: device 4 (RootFS_1) set to be root filesystem
0x000000050000-0x0000007e0000 : "Firmware_1"
0x0000007e0000-0x0000007f0000 : "Config_1"
0x0000007f0000-0x000000800000 : "Dump"
0x000000800000-0x000000830000 : "U-State"
0x000000830000-0x000000840000 : "U-Config_res"
0x000000840000-0x000000850000 : "RF-EEPROM_res"
0x000000850000-0x000000fe0000 : "Firmware_2"
0x000000fe0000-0x000000ff0000 : "Config_2"
0x000000000000-0x000001000000 : "Full"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
Netfilter messages via NETLINK v0.30.
esetnds: Module loaded.5.0 (8192 buckets, 32768 max)
l2tp_core: L2TP core driver, V2.0oading /lib/modules/4.9-ndm-4/phr.ko.
Fast NAT loaded
[I] Jan  1 00:00:05 ndm2tp_ppp: PPPoL2TP kernel driver, V2.0
m: Core::Sysnf_nat_rtsp v0.7 loadinging driver
tem::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_proto_gre.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/ip6_udp_tunnel.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_h323.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nacct.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/mtdoops_proc.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/resetnds.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_pptp.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_nat_h323.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_nat_pptp.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/aead.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/l2tp_core.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/l2tp_ppp.ko.
[I] Jan  1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_nat_rtsp.ko.
[I] Jan  1 00:00:05 ndm: Core::Mode: starting the system in "ap" mode.
[I] Jan  1 00:00:05 ndm: FileSystem::Temp: mounting /var/...
[I] Jan  1 00:00:05 ndm: Core::Authenticator: MD5 generator created.
[I] Jan  1 00:00:05 ndm: Core::Authenticator: NT generator created.3.C.10.0-0.

Keenetic Lite Models

CPU: Ralink RT3050 (MIPS24Kc) @320MHz, Flash: 4MB, RAM: 32MB
WLAN: WiSoC 1T1R/150Mbps (2.4GHz), Switch: 5x FE (10/100)
CPU: Ralink RT5350 (MIPS24Kc) @360MHz, Flash: 8MB, RAM: 32MB
WLAN: WiSoC 1T1R/150Mbps (2.4GHz), Switch: 5x FE (10/100)
CPU: MediaTek MT7620N (MIPS24Kc) @580MHz, Flash: 8MB, RAM: 64MB (DDR1)
WLAN: WiSoC 2T2R/300Mbps (2.4GHz), 2x 3dBi (fixed ext), Switch: 5x FE (10/100)
CPU: MediaTek MT7620N (MIPS24Kc) @580MHz, Flash: 8MB, RAM: 64MB (DDR1)
WLAN: WiSoC 2T2R/300Mbps (2.4GHz), 2x 3dBi (fixed ext), Switch: 5x FE (10/100)
CPU: MediaTek MT7628NN (MIPS24Kc) @575MHz, Flash: 8MB, RAM: 64MB (DDR2)
WLAN: WiSoC 2T2R/300Mbps (2.4GHz), 2x 5dBi (fixed ext), Switch: 5x FE (10/100)
CPU: MediaTek MT7628NN (MIPS24Kc) @575MHz, Flash: 16MB, RAM: 64MB (DDR2)
WLAN: WiSoC 2T2R/300Mbps (2.4GHz), 2x 5dBi (eLNA), Switch: 5x FE LED, Mode

Images


Retrieved from "https://wikidevi.wi-cat.ru/index.php?title=Keenetic_Lite_(KN-1310)&oldid=370256"