LinkSprite pcDuino
LinkSprite pcDuino
(Est.) release date: February 2013
(Est.) initial retail price (in USD): $59
Type: single-board computer
Power: 5 VDC, 2 A
Connector type: USB (Micro-B) Female
CPU1: Allwinner A10 (1.0 GHz)
FLA1: 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (SK hynix H27UAG8T2BTR-BC)
RAM1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (Hynix H5TQ2G83EFR-PBC × 4)
Expansion IFs: USB 2.0, USB 2.0 (OTG)
USB ports: 3
JTAG: no
Serial: yes, 3.3V TTL, 3-pin header, populated, (115200 8N1), J5
ETH chip1: Allwinner A10
ETH chip2: IC+ IP101A
LAN speed: 100M
LAN ports: 1
Additional chips
PMIC;X-Powers Limited;AXP209;;1;
Stock bootloader: U-Boot 2012.10 04277
Stock FW OS: Linux 3.4.29 Linaro 12.07
TPFirmware supported: Debian
Flags: HDMI, Micro SD Card slot, GPIO, SPI, I2C
Ethernet OUI: none specified
CPU1 brand | FLA1 | RAM1 | |
---|---|---|---|
LinkSprite pcDuino | Allwinner | 2,048 MiB2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />2 GiB <br /> | 1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br /> |
LinkSprite pcDuino4 Nano | Allwinner | 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> | 1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br /> |
LinkSprite pcDuino8 Uno | Allwinner | 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> | 1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br /> |
LinkSprite pcDuino9s | Rockchip | 8,192 MiB8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br />8 GiB <br /> | 2,048 MiB2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />2 GiB <br /> |
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
Single-board Computer
Links
- LinkSprite pcDuino on Linux-Sunxi Wiki
- pcDuino Allwinner A10 Board with Arduino Compatible Headers on CNX-Software
Hardware specification
- CPU: Allwinner A10 @1.0GHz ARM (Cortex-A8)
- GPU: Mali-400
- Memory: 1GB (DDR3) RAM @408MHz
- Onboard Storage: 2GB (NAND) Flash,
- TF card (max.32GB)/MMC card slot