Linksys E8350
Linksys E8350 v1
Manuf (OEM/ODM): Wistron NeWeb ENWA04
FCC approval date: 31 July 2014
(Est.) release date: 01 October 2014
Country of manuf.: China
Series: AC2400
Type: wireless router, media bridge
FCC ID: Q87-E8350
IC ID: 3839A-E8350
PCB ID: ENWA04
Power: 12 VDC, 3 A
Connector type: barrel
CPU1: Qualcomm IPQ8064 (1.4 GHz, 2 cores)
CPU2: Quantenna QT3840BC (500 MHz, 2 cores)
FLA1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Micron MT29F1G08ABBDA-H4:D)
FLA2: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25U3235FM2I-10G)
RAM1: 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Micron MT41K128M16JT-125:K × 2)
RAM2: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W631GG6KB-12)
Expansion IFs: USB 3.0, USB 2.0 / eSATA (combo port)
USB ports: 2
SATA ports: 1
Serial: yes
WI1 chip1: Quantenna QT3840BC
WI1 chip2: Quantenna QT2518B
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 4x4:4
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Qualcomm Atheros QCA9880
WI2 802dot11 protocols: bgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL, RP-SMA
ETH chip1: Qualcomm IPQ8064
Switch: Qualcomm Atheros QCA8337
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1
abgn+ac
Flags: 256QAM
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 154 are Linksys devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 58 are Linksys devices
802dot11 OUI: none specified
FCC ID | |
---|---|
Linksys E8400 | Q87-E8350 |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.
AC2400 Dual-Band Wi-Fi Gigabit Router
This device has probably been renamed as the Linksys E8400 for marketing purposes.
Text including "ENWA04" appears to be silkscreened on the board in the FCC photos.
- Wistron NeWeb (WNC) manuf?
Per the FCC photos..
- The NAND is marked w/ 3VE17 NW264 (FBGA code NW264: MT29F2G08ABBEAH4:E,
- 2Gbit SLC NAND), this conflicts with the data added by another user
- Each of the IPQ8x's RAM chips is marked w/ 3VK77 D9PTK (FBGA code D9PTK:
Wi-Fi Certified : WFA55152 (as of 07/09/2014)
- The WFA certification indicates this device will be using Quantenna + QCA silicon..
- which the FCC photos indicate it is indeed using.
According to the Product comparison chart of EA7500, EA8500, E8350 and E8400 from Linksys,
- the E8350 supports wireless bridge mode but cannot operate as a wireless repeater/extender.
Specifications
- CPU: Qualcomm IPQ8064 Internet Processor (Dual-Core @1.4GHz)
- RAM: Micron MT41K128M16JT-125 (D9PTK) (DDR3L, x4/x8/x16)
- Small Flash: M25P80 (SPI 5.0), Macronix MX25U3235F (4MB)
- NAND Flash: Micron MT29F1G08ABBDAH4 (NW302 [VFBGA63])
- NAND Controller ID: 0x4030, NAND Device ID: 0x1580a12c
- WLAN1: Qualcomm Atheros QCA9880-BR4A (3x3 MIMO) DS
- WLAN2: Quantenna QT3840BC/QT2518B (802.11ac 4x4 MIMO)
- Switch: Qualcomm Atheros QCA8337-AL3C (7-port GbE)
- Bootinfo: console=ttyHSL1,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs
- Firmware: Build_for_Belkin_Linksys_AC2350_k3.4.0_2014-04-16_lke_8.9.0_r227 163_b16
Reviews
See also
- Linksys EA7300
- Linksys EA7400
- Linksys EA7500
- Linksys EA8100
- Linksys EA8250
- Linksys EA8300
- Linksys E8350
- Linksys EA8350
- Linksys E8400
- Linksys EA8500