Linksys EA9500 v1.1
Linksys EA9500 v1.1
FCC approval date: 07 June 2016
Country of manuf.: China
Type: wireless router
FCC ID: Q87-EA9500V11
Power: 12 VDC, 5 A
Connector type: barrel
CPU1: Broadcom BCM4709C0 (1.4 GHz, 2 cores)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Toshiba TC58BVG0S3HTA00)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Samsung K4B2G1646Q-BCK0)
Expansion IFs: USB 2.0, USB 3.0
USB ports: 2
WI1 chip1: Broadcom BCM4366
WI1 chip2: Broadcom BCM4366
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 4x4:4
WI1 antenna connector: U.FL
WI2 chip1: Broadcom BCM4366
WI2 802dot11 protocols: bgn
WI2 MIMO config: 4x4:4
WI2 antenna connector: none
ETH chip1: Broadcom BCM4709C0
ETH chip2: Broadcom B50212EB1
Switch: Broadcom BCM53125S
LAN speed: 1G
LAN ports: 8
WAN speed: 1G
WAN ports: 1
abgn+ac
Additional chips
3-lane, 3-port PCIe Gen2 Switch;PLX Technology;PEX8603;PLX, Technology (R), PEX8603-AB50NI G, 1519, D44A-3B48-3010, TAIWAN;1;
Flags: Wave2, MU-MIMO, NitroQAM
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| Linksys EA9400 v1 | Q87-EA9500V11 |
| CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
|---|---|---|---|
| Linksys EA9500 v1 | Broadcom | Broadcom | Broadcom |
| Linksys EA9500 v1.1 | Broadcom | Broadcom | Broadcom |
| Linksys EA9500 v2 | Broadcom | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Max-Stream AC5400 MU-MIMO Gigabit Router
- Web GUI: http://LinksysSmartWiFi.com
FCC filings cover both this EA9500 v1.1 and the Linksys EA9400 v1.
They also include two EUTs where EUT1 uses "BCM4366C0" and EUT2 uses
- "BCM4366B1" and "The difference is the allocation of the antenna cables"
Internal photos for EUT2 are identical to those published under the FCC entry for
- the Linksys EA9500 v1 so this FCC submission may cover both v1 and v1.1
According to this post in the SNB forums, BCM43XXC0 radios "PLUS updated
- firmware is needed for decent MU-MIMO performance"
