Linksys WRT100
Linksys WRT100
Manuf (OEM/ODM): Gemtek
Type: wireless router
FCC ID: Q87-WRT100
IC ID: 3839A-WRT100
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT2780
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Eon EN29LV320AB-70TCP)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Samsung K4S641632K-UC60 × 2)
Expansion IFs: none specified
Serial: yes, internal, 9-pin header, unpopulated, 3.3V TTL, Gemtek type1 pinout
WI1 chip1: Ralink RT2780
WI1 chip2: Ralink RT2720
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x2:2
WI1 antenna connector: none
ETH chip1: Ralink RT2780
Switch: IC+ IP175C
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
TPFirmware supported: OpenWrt (leitec)
Default SSID: linksys (50 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1297 additional devices
of which 153 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 289 additional devices
of which 142 are Linksys devices
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
RangePlus Wireless Router
• Support page • (Template link outdated)
WRT100 serial numbers appear to start with MRX0.
