Manuf (OEM/ODM): CyberTAN
FCC approval date: 10 April 2009
Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 4.5 mm (OD), 2 mm (ID), 10 mm (LEN)
CPU1: Broadcom BCM4716B0
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Winbond 25X32VSIG)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond W9425G6EH-5H)
Expansion IFs: none specified
Serial: yes, internal, 5-pad header, unpopulated, 3.3V TTL, (115200,8,N,1)
WI1 chip1: Broadcom BCM4716B0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Broadcom BCM4716B0
Switch: Broadcom BCM53115
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Wireless-N Gigabit Router
• Support page • (Template link outdated)
"3762-02010206R" is silkscreened on the board.
Linksys WRT310N v2 on TechInfoDepot
On the DD-WRT forums
The power adapter included with the device is a Linksys AD12V/1A-SW. ID/OD/Len measurements are approximate.
TTL Serial Connection
You'll need a 3.3v capable TTL level converter like CP2102 chipset device. (find at amazon, ebay, etc)
The unpopulated pads are labeled J14. Pinout is: 3.3v, TX, RX, NC?, GND. Serial settings 115200,8,N,1.
USB Converter (notice TX->RX and RX->TX)