Linksys WRT54AG
Linksys WRT54AG v1
Availability: EoL
Manuf (OEM/ODM): Gemtek WX5514
Type: wireless router
FCC ID: Q87-WRT54AG, OSZ39000M
PCB ID: 109-700-9100
Power: 5 VDC, 2.5 A
Connector type: barrel
CPU1: Broadcom BCM4702 (175 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Intel E28F320J3A-110)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Dynachips D98SD12816AH-6 × 2)
Expansion IFs: Mini PCI
Mini PCI slots: 1
JTAG: yes, 20-pad header
Serial: yes, 9-pad header, DB-9
WI1 module: Gemtek WL-535AG
WI1 module IF: Mini PCI
WI1 chip1: Intersil ISL3890
WI1 chip2: Intersil ISL3690
WI1 802dot11 protocols: abg
WI1 antenna connector: none
ETH chip1: Broadcom BCM4702
Switch: Broadcom BCM5325A2
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
abg
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 154 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 295 additional devices
of which 143 are Linksys devices
802dot11 OUI: none specified
FCC ID | |
---|---|
Intersil ISL39000M | OSZ39000M1 OSZ39000M |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
Dual-Band Wireless A/G Broadband Router
"109-700-9100" and "WX5514_V04" is silkscreened on the main board of a production unit.
- The board shown in the FCC photos has two Mini PCI slots, but the un-used slot seems to be omitted on (at least some) production models. Likewise, the UART circuitry is omitted, though it is also omitted in the FCC docs.
"WL535AG" and "109-501-5200" seems to be soldered on the wireless module on a production unit.
- The U.FL connectors also seem to be omitted on the wireless module, opting for direct soldering to the card.
OEM: Gemtek WX-5514, same Gemtek part as the Linksys WRT51AB.
- The default SSID may be default. The FCC manual states it is linksys.
The power adapter shown in the FCC photos is a Linksys MS15-050250-A1D (100-240VAC ~ 50/60Hz, 0.5A -> 5VDC, 2.5A).
This device may use U-NII-2 channels but does not implement DFS since it predates the FCC requirements.
Forum threads
- RAM: ProMOS V54C3128164VAT6 (16MB)
- Linksys WRT55AG v1 - Broadcom B/G + Atheros A
Additional external links
Images