Lite-On WCBN607RH-H1 (HP)
Lite-On WCBN607RH -H1 (HP)
FCC approval date: 23 August 2010
Country of manuf.: China
Interface: Mini PCIe (half)
ID: 1814:3592 SS: 103c:1638
Windows: PCI\VEN_1814&DEV_3592&SUBSYS_1638103C
FCC ID: VQF-RT3592BC8
IC ID: 7542A-RT3592BC8
WI1 chip1: Ralink RT3592
Probable Linux driver
rt2800pci (experimental,
in backports) or rt2860sta
PCI ID first seen in kernel v2.6.33 (2010-02-24)
(see also passys)
Windows driver
possibly see MediaTek's website
Older Ralink drivers have been removed.
See the Wayback Machine
for some older driver sets (filter by EXE/ZIP)
Antenna connector: U.FL
abgn, 2x2:2
Flags: bluetooth
FCC ID | |
---|---|
Ralink RT3592BC8 Reference Design | VQF-RT3592BC8 |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
HP SPS#: 630813-001
HP P/N: 629887-001
"WCBN607RH" and "323C300092ID" is silkscreened on the board.
Info dump
• iw list |
---|
Wiphy phy2 Band 1: Capabilities: 0x2f2 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI TX STBC RX STBC 2-streams Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-15, 32 TX unequal modulation not supported HT TX Max spatial streams: 2 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (27.0 dBm) * 2417 MHz [2] (27.0 dBm) * 2422 MHz [3] (27.0 dBm) * 2427 MHz [4] (27.0 dBm) * 2432 MHz [5] (27.0 dBm) * 2437 MHz [6] (27.0 dBm) * 2442 MHz [7] (27.0 dBm) * 2447 MHz [8] (27.0 dBm) * 2452 MHz [9] (27.0 dBm) * 2457 MHz [10] (27.0 dBm) * 2462 MHz [11] (27.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Band 2: Capabilities: 0x2f2 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI TX STBC RX STBC 2-streams Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-15, 32 TX unequal modulation not supported HT TX Max spatial streams: 2 HT TX MCS rate indexes supported may differ Frequencies: * 5180 MHz [36] (17.0 dBm) * 5190 MHz [38] (17.0 dBm) * 5200 MHz [40] (17.0 dBm) * 5220 MHz [44] (17.0 dBm) * 5230 MHz [46] (17.0 dBm) * 5240 MHz [48] (17.0 dBm) * 5260 MHz [52] (20.0 dBm) (radar detection) * 5270 MHz [54] (20.0 dBm) (radar detection) * 5280 MHz [56] (20.0 dBm) (radar detection) * 5300 MHz [60] (20.0 dBm) (radar detection) * 5310 MHz [62] (20.0 dBm) (radar detection) * 5320 MHz [64] (20.0 dBm) (radar detection) * 5500 MHz [100] (20.0 dBm) (radar detection) * 5510 MHz [102] (20.0 dBm) (radar detection) * 5520 MHz [104] (20.0 dBm) (radar detection) * 5540 MHz [108] (20.0 dBm) (radar detection) * 5550 MHz [110] (20.0 dBm) (radar detection) * 5560 MHz [112] (20.0 dBm) (radar detection) * 5580 MHz [116] (20.0 dBm) (radar detection) * 5590 MHz [118] (20.0 dBm) (radar detection) * 5600 MHz [120] (disabled) * 5620 MHz [124] (disabled) * 5630 MHz [126] (disabled) * 5640 MHz [128] (disabled) * 5660 MHz [132] (20.0 dBm) (radar detection) * 5670 MHz [134] (20.0 dBm) (radar detection) * 5680 MHz [136] (20.0 dBm) (radar detection) * 5700 MHz [140] (20.0 dBm) (radar detection) * 5745 MHz [149] (30.0 dBm) * 5755 MHz [151] (30.0 dBm) * 5765 MHz [153] (30.0 dBm) * 5785 MHz [157] (30.0 dBm) * 5795 MHz [159] (30.0 dBm) * 5805 MHz [161] (30.0 dBm) * 5825 MHz [165] (30.0 dBm) * 5835 MHz [167] (disabled) * 5845 MHz [169] (disabled) * 5855 MHz [171] (disabled) * 5865 MHz [173] (disabled) Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ AP, mesh point } <= 8, total <= 8, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. |
lspci -nnv dump
05:00.0 Network controller [0280]: Ralink corp. RT3592 Wireless 802.11abgn 2T/2R PCIe [1814:3592] Subsystem: Hewlett-Packard Company Device [103c:1638] Physical Slot: 1 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f1d00000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 00-00-c4-24-83-9d-65-1c Kernel driver in use: rt2800pci
dmesg dump
pci 0000:05:00.0: [1814:3592] type 00 class 0x028000 pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x0000ffff] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1d00000-0xf1d0ffff] pci 0000:05:00.0: no hotplug settings from platform rt2800pci 0000:05:00.0: enabling device (0000 -> 0002) ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0009 detected ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34