NAG SNR-CPE-ME1

NAG SNR-CPE -ME1
Availability: now

(Est.) release date: May 2017
Country of manuf.: China
Series: AC750

Local image

Type: wireless router, CPE

Power: 12 VDC, 2 A
Connector type: barrel

CPU1: MediaTek MT7621AT (880 MHz, 2 cores)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (GigaDevice GD25Q128CSIG)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Brand? DDR3)

Expansion IFs: USB 3.0
USB ports: 1

WI1 chip1: MediaTek MT7603EN
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: MediaTek MT7610EN
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 1x1:1
WI2 antenna connector: none

ETH chip1: MediaTek MT7621AT
Switch: MediaTek MT7621AT
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1

abgn+ac

Additional chips
2.4GHz RF Power Amplifier IC;Skyworks (SiGe);SE2576L;;2;
5GHz RF Power Amplifier IC;Skyworks (SiGe);SE5003L;;1;

Stock bootloader: U-Boot

Stock FW OS: Linux 3.4.113 Wive-NG-MT

TPFirmware supported: Wive-NG (sfstudio) • (Blog | List)

Default SSID: Wive-NG-MT (2 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 4 are NAG devices
Default login user: Admin
Default login password: Admin
Admin:Admin credentials used by 16 additional devices
of which 4 are NAG devices

802dot11 OUI: F8:F0:82 (4 E, 4 W)
Ethernet OUI: F8:F0:82 (4 E, 4 W)

	CPU1 brand	WI1 chip1 brand	WI2 chip1 brand
NAG SNR-CPE-MD1	MediaTek	MediaTek	MediaTek
NAG SNR-CPE-ME1	MediaTek	MediaTek	MediaTek
NAG SNR-CPE-W4N	Ralink	Ralink
NAG SNR-CPE-W4N (rev.M)	MediaTek	MediaTek
NAG SNR-CPE-W4N-3G	Ralink	Ralink

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

---

AC750 Wireless Dual Band Gigabit Router

Product page

Future support available with Wive-NG (sfstudio) • (Blog | List)

Wive-NG-MT on Wi-CAT (RU)

The bootloader used is assumed to be U-Boot.

Default SSIDs Wive-NG-MT.

Specifications

SNR-CPE-ME1 on Wi-CAT (RU)

• CPU: MediaTek MT7621AT @880MHz (Dual Core)
• Flash: GigaDevice GD25Q128CSIG 16MB (SPI)
• RAM: 256MB (DDR3)
• WLAN: MediaTek MT7603EN/MT7610EN

PA: Skyworks (SiGe) SE2576L / SE5003L (?)

20dBm (100mW)/2.4GHz, 23dBm (200mW)/5GHz

• WAN: 1x GbE, LAN: 4x GbE ports
• USB: 1x USB 3.0 (power off/on)

supports Entware (Flash/HDD),

3G/4G modem (RAS/NDIS)

See also

List of Wive-ng firmware supported devices

• NAG SNR-CPE-ME1 - AC750 Wireless Router
• NAG SNR-CPE-MD1 - AC750 Wireless Router
• NAG SNR-CPE-W2N - N300 Wireless Router
• NAG SNR-CPE-W4N (rev.M) - N300 Wireless Router

CPU: MediaTek MT7620N (2T2R 802.11bgn), ESMT

BL-RM7620N-V1.2 • PCB image

Images