NEC Aterm WG1400HP
NEC WG1400 HP
Availability: Japan only
(Est.) release date: 28 March 2013
(Est.) initial retail price (in USD): $142
Type: wireless router
Power: 12 VDC, 1.5 A
CPU1: Qualcomm Atheros QCA9558
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5TU32M16DG × 2)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Qualcomm Atheros QCA9880
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Qualcomm Atheros QCA9558
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: none
ETH chip1: Qualcomm Atheros QCA9558
Switch: Atheros AR8327
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn+ac
Default SSID: aterm-XXXXXX-g (3 addl. devices)
, aterm-XXXXXX-a (2 addl. devices)
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 119 additional devices
of which 1 are NEC devices
802dot11 OUI: none specified
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
Product page (JP) • Support page (JP) • Manual (JP)
Per NECs manual...
- The device appears to have a default IP of 192.168.10.1 in Router mode.
- The default SSID formats appear to be aterm-XXXXXX-g and aterm-XXXXXX-a,
- where XXXXXX may be related to a MAC address used by the unit
- (upper / lower case letters? ) or something completely different. I dunno
- Guest network SSIDs seem to be aterm-XXXXXX-gx and aterm-XXXXXX-ax
- WEP only SSID (2.4GHz only) is aterm-XXXXXX-gw
- On Amazon.co.jp • ASIN: B00C2FID14, Listed on: 2013-03-28,
- Price as of 2013-04-21: ￥ 14,100 (~$141.65 USD)
