National Datacomm NWH660

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

National Datacomm NWH660

FCC approval date: 14 September 2000
Country of manuf.: Taiwan

Type: access point

FCC ID: IOU0660S02

Power: 5 VDC, ? A
Connector type: barrel

CPU1: AMD Am186
FLA1: 0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br /> (Macronix Model? × 2)
RAM1: 0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br /> (EliteMT Model? × 4)

Expansion IFs: none specified
Serial: DE-9

WI1 chip1: Harris HFA3841
WI1 chip2: Intersil Model?
WI1 chip3: Harris Model?
WI1 802dot11 protocols: b
WI1 antenna connector: unknown

ETH chip1: Realtek RTL8019AS
LAN speed: 10M
LAN ports: 1

b

Flags: schematics

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 0 are National Datacomm devices

802dot11 OUI: 00:80:C6 (5 E, 4 W)
Ethernet OUI: 00:80:C6 (5 E, 4 W)

For a list of all currently documented AMD chipsets with specifications, see AMD.
For a list of all currently documented Harris chipsets with specifications, see Harris.


InstantWave High Speed Access Point
Downloads on shimizu.com.hk

There would appear to be multiple HW revisions of this device.

This device does not appear to have a Web configuration interface.

The FCC test report states the device uses a reverse SMA connector. However, it is not clear if this means reverse polarity SMA or reverse threaded SMA.

"68-806900-06 REV:A2" is silkscreened on the wireless module.

The default SSID may be Wireless.