Netgear DGND3300
Netgear DGND3300 v1
Manuf (OEM/ODM): SerComm
Type: wireless router, dsl modem
FCC ID: PY308200090
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: Broadcom BCM6358U
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX29LV640DBTC)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (EtronTech EM6AA160TS-5G)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM4318E
WI1 802dot11 protocols: bg
WI1 antenna connector: none
WI2 chip1: Broadcom BCM4322
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM6358U
Switch: Broadcom BCM5325E
LAN speed: 100M
LAN ports: 4
abgn
Flags: ADSL2+
Default SSID: NETGEAR-DualBand-N (1 addl. devices)
, NETGEAR-2.4-G (1 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 77 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 304 are Netgear devices
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
RangeMax Dual Band Wireless-N Modem Router
Product page
• Support page
OEM SerComm (YNF10A-1.6)
Per the manual, the default SSID for the a/n radio is NETGEAR-DualBand-N and the 11g radio is NETGEAR-2.4-G.
There is a v2 of this model (which s08/06/2010hares the same FCC ID).
The support page for the v2 unit is here.
- E0:91:F5 OUI on the v2
- FCC ID PY308400100 (not granted) apparently covered the v2