Netgear JR6150
Netgear JR6150
Manuf (OEM/ODM): SerComm
FCC approval date: 30 May 2014
Country of manuf.: China
Type: wireless router
FCC ID: PY314100253
IC ID: 4054A-14100253
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: MediaTek MT7620A
FLA1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (ESMT F59L1G81A-25T)
RAM1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT6TU64M16GG-AC)
Expansion IFs: USB 2.0
Mini PCIe slots: 1
USB ports: 1
Serial: yes, internal, 4-pin header, populated, 3.3V TTL
WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: MediaTek MT7610E
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 1x1:1
WI2 antenna connector: U.FL
ETH chip1: MediaTek MT7620A
Switch: Qualcomm Atheros QCA8337
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn+ac
802dot11 OUI: none specified
FCC ID | |
---|---|
Netgear R6050 | PY314100253 |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
AC750 Wireless Dual Band Gigabit Router
The FCC docs indicate..
- Two models are covered by this FCC ID - the R6050 and JR6150
- This router is using a MediaTek platform
The manufacturer may possibly be DNIno, per the images below it's a SerComm manuf'ed unit
This device was under short-term confidentiality, but that expired 11/24/2014.
Serial port pinout and configuration
- Note: Headers might not be populated as seen here
(Gnd) (Tx) (3.3 Vcc) (Rx) pin4 pin3 pin2 pin1 <
Speed | Bits | Stop Bits | Parity | Flow Control |
---|---|---|---|---|
57600 | 8 | 1 | None | None |
Additional external links
- mediatrek notes internal images of the JR6150 are available @ openitforum.pl
- Specifications are per these images.
- "AM100C-1.6MM" and "JR6150" is silkscreened on the board shown.