Netgear WAC730
Netgear WAC730
FCC approval date: 01 September 2015
Country of manuf.: China
Type: access point
FCC ID: PY315300321
IC ID: 4054A-15300321
Power: 12 VDC, 2.5 A
PoE tag: 802.3af/at, standard
CPU1: Broadcom Model?
FLA1: ? MiB (Macronix Model?)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Micron MT41K128M16JT-125:K)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM43460
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 chip1: Broadcom BCM43460
WI2 802dot11 protocols: bgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Broadcom Model?
Switch: Broadcom Model?
LAN speed: 1G
LAN ports: 1
abgn+ac
Additional chips
WLAN Front-End Module;Skyworks;SKY85310-11;SKY11, 85310, UM43V;3;
5GHz Front End Module;Skyworks;SKY85712-11;SKY11, 85712, 510WX;3;
Flags: DFS
Default IP address: 192.168.0.100
the IP 192.168.0.100 is used by 18 additional devices
of which 10 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 304 are Netgear devices
802dot11 OUI: none specified
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
ProSAFE Dual Band Wireless AC Access Point
"WAC730-720_beta1.0 REV 2.0" is silkscreened on the board in the FCC photos.
"D9PTK" FBGA code on the RAM corresponds to the MT41K128M16JT-125:K
- PAV12V-100AUS (for Australia)
- PAV12V-100EUS (for Europe, outside of UK)
- PAV12V-100NAS (for North America)
- PAV12V-100PRS (for China)
- PAV12V-100UKS (for UK)