Netgear WNHDE111

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Netgear WNHDE111

Manuf (OEM/ODM): Delta Networks

FCC approval date: 10 January 2008
Country of manuf.: Taiwan

Type: access point, bridge

FCC ID: PY307300070

Power: 12 VDC, 1.2 A
Connector type: barrel

CPU1: Ubicom Model?
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX25L1605AMC-15G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (ESMT M13S128168A-5T)

Expansion IFs: none specified

WI1 chip1: Atheros AR5416
WI1 chip2: Atheros Model?
WI1 802dot11 protocols: an
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Ubicom Model?
ETH chip2: Atheros Model?
ETH chip3: Atheros Model?
LAN speed: 100M
LAN ports: 2

an

Default SSID: NETGEAR-HD
Default IP address: 192.168.0.240
the IP 192.168.0.240 is used by 1 additional devices
of which 0 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 304 are Netgear devices

802dot11 OUI: 00:1E:2A (10 E, 12 W)
Ethernet OUI: 00:1E:2A (10 E, 12 W)

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.


5GHz Wireless-N HD Access Point/Bridge
 • Support page

On the DD-WRT forums (internal shots)

"2976302702" is silkscreened on the board.

The IP address in AP mode defaults to 192.168.0.240. The IP address in Bridge mode defaults to 192.168.0.241. Per the manual, the default SSID is NETGEAR-HD.

Appears to be using 2 chains for TX and RX, 3 antennas