ODROID-GO Advance Black Edition
Hardkernel ODROID-GO Advance Black Edition (Rev 1.1)
(Est.) release date: August 2020
(Est.) initial retail price (in USD): $59
Country of manuf.: Korea
Type: portable game console
FCC ID: 2AC7Z-ESPWROOMS2
PCB ID: R-R-HKL-ODROID-GO-Adva
Power: 5 VDC, 1.5 A
Connector type: USB (Type-C)
CPU1: Rockchip RK3326 (1.3 GHz, 4 cores)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (XTX Tech XT25F128B)
RAM1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (Micron MT41K256M16LY-107:N × 2)
Expansion IFs: USB 2.0
USB ports: 1
Serial: yes, 4-pin header, 3.3V TTL, (115200 8N1), CON3
WI1 module: Espressif ESP-WROOM-S2
WI1 module IF: SDIO (module)
WI1 chip1: Espressif ESP8266
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: integrated
bgn
Additional chips
PMIC w/ Integrated CODEC;Rockchip;RK817;;1;
USB Power Distribution Switch;First Silicon;FC9516A;;1;
Overvoltage Protection Circuit;ON Semiconductor;NCP372;;1;
Stock bootloader: U-Boot 2017.09
Stock FW OS: Linux 4.4.189 EmuELEC
Flags: Micro SD Card slot, 3.5" LCD Display, Audio out (3.5mm), speaker, Li-Po battery connector, I2C, GPIO, power switch
802dot11 OUI: 18:FE:34
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
ODROID-GO Advance Black Edition | Rockchip | Espressif | |
ODROID-GO Super | Rockchip |
For a list of all currently documented Espressif chipsets with specifications, see Espressif.
For a list of all currently documented Rockchip SoC's with specifications, see Rockchip.
ODROID-GO Advance Black Edition
"HARDKERNEL", "GO-ADVANCE REV 1.1" and "20200522" are silkscreened on board top.
- "Made in Korea" and "R-R-HKL-ODROID-GO-Adva" are silkscreened on board bottom.
Links
Hardware specification
- CPU: Rockchip RK3326 @1.3GHz
- SoC: Quad-Core ARM (Cortex-A35)
- GPU: Mali-G31 MP2
- Storage: 16MB (SPI NOR) flash,
- TF card (max.128GB)/MMC card
- Memory: 1GB (DDR3L) SDRAM
- Wi-Fi: Espressif ESP8266EX (802.11bgn)
- USB: 1x USB 2.0 port; GPIO: 1x 10-pin port
- Power Source: 3.7V/3000mAh Li-Polymer battery
- recharge by 5V/1.5A via USB (Type-C) port
Images