ODROID-N2+
Hardkernel ODROID-N2 + (rev 0.6)
Availability: Currently Shipping
(Est.) release date: July 2020
(Est.) initial retail price (in USD): $63
Country of manuf.: Korea
Type: single-board computer
Power: 7.5-16 VDC, 2-4 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
CPU1: Amlogic S922X (2.0-2.2 GHz, 6 cores)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (XTX Tech XT25Q64D)
FLA2: 512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> (XTX Tech XT25F01D)
RAM1: 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (Samsung K4A8G165WC-BCTD × 2)
Expansion IFs: USB 2.0 (OTG), USB 3.0
USB ports: 5
Serial: yes, 4-pin header, populated, 1.8V TTL, (115200 8N1)
ETH chip1: Amlogic S922X
ETH chip2: Realtek RTL8211F
LAN speed: 1GbE
LAN ports: 1
Additional chips
CMOS Real Time Clock;NXP;PCF8563;;1;
USB 3.1 Gen 1 Hub Controller;Genesys Logic;GL3523;;1;
3-Vrms Audio Driver with Adjustable Gain;DIOO Micro;DIO2133;;1;
3.3V 8A Synchronous Buck Converter w/ 100mA LDO;MPS;NB680;;1;
18V 2A Synchronous Step-Down Converter;Silergy Corp;SY8120B;;2;
300mA Ultra Low Current Voltage Regulator;First Silicon;FC6232;;1;
500mA Bypass Capacitor CMOS LDO Regulator;Richtek;RT9013;;1;
28V 6A Synchronous Step-Down Regulator;Silergy;SY8366H;;1;
26V 6A Synchronous Step-Down Converter;MPS;MP8756;;2;
2-Channel ESD Protection for USB 3.0;TI;TPD2EUSB30;;8;
USB Power Distribution Switch;First Silicon;FC9516A;;2;
300mA CMOS Linear Regulator;First Silicon;FC8731;;3;
0.2A Single Channel Load Switch;Diodes Inc;AP2331;;1;
Single Channel Current-Limited Power Switch for USB;JoulWatt;JW7111;;4;
Stock FW OS: Linux 4.9.312 Ubuntu 22.04
TPFirmware supported: Arch Linux ARM • (List | DLs), Armbian, Debian, Manjaro ARM, DietPi, CoreELEC, Volumio, Android PIE
Flags: Micro SD Card slot, eMMC module connector, HDMI 2.0, Audio/CVBS, SPDIF out, IR receiver, RTC w/ battery, SPI, I2C, ADC header, UART, GPIO, fan header, heatsink
Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 206 additional devices
of which 9 are Hardkernel devices
Default login user: odroid
Default login password: odroid
odroid:odroid credentials used by 8 additional devices
of which 8 are Hardkernel devices
| CPU1 brand | FLA1 | RAM1 | |
|---|---|---|---|
| ODROID-N2 | Amlogic | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | 4,096 MiB4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br />4 GiB <br /> |
| ODROID-N2+ | Amlogic | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | 2,048 MiB2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />2 GiB <br /> |
For a list of all currently documented Amlogic chipsets with specifications, see Amlogic.
Single Board Computer - ODROID-N2+
"ODROID-N2+", "REV 0.6 20210121", "R-R-HKL-ODROID-N2", and "HARDKERNEL"
- are silkscreened on board top.
"Design by ruppi.kim@hardkernel.com" is silkscreened on board bottom.
eMMC module connector with modules of 8GB, 16GB, 32GB, 64GB and 128GB available.
Links
- ODROID-N2 on ODROID Wiki
- ODROID-N2 Plus SBC Gets Amlogic S922X Rev. C on CNX|Software
- ODROID-N2+ review with Ubuntu 21.10 on CNX|Software
Hardware specification
- CPU: Amlogic S922X (ARMv8-A)
- 4x ARM (Cortex-A73) @2.2GHz and
- 2x ARM (Cortex-A53) @2.0GHz
- GPU: Mali-G52 @864MHz
- Storage: 8MB (SPI) flash, SDHC Card slot,
- eMMC 4.5 connector
- RAM: 2GB (DDR4) @1320MHz
- USB: 4x USB 3.0, 1x micro USB 2.0 (OTG) ports
- Network: 1x GbE port
- Power: 12V/2A via barrel recommended
Images
Board Top
Board Bottom
