Orange Livebox 4
Jump to navigation
Jump to search
Orange Livebox 4
Availability: now
Manuf (OEM/ODM): Sagemcom
Type: dsl modem, wireless router, analog phone gateway
Power: 12 VDC, 2.5 A
Connector type: barrel
CPU1: Broadcom BCM63138 (1.0 GHz, 2 cores)
CPU2: Quantenna QT3840BC (500 MHz, 2 cores)
FLA1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Spansion S34ML04G200TFI00)
FLA2: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Winbond W25Q80BVSIG)
RAM1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Nanya NT5CC512M8EN-DI × 2)
Expansion IFs: USB 3.0, SATA, SFP
USB ports: 2
SATA ports: 1
SFP ports: 1
JTAG: yes, 10-pin header, x2
Serial: yes, 4-pin header, x4, (115200 8N1)
WI1 chip1: Broadcom BCM43602
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: RP-SMA
WI2 chip1: Quantenna QT3840BC
WI2 chip2: Quantenna QT2518B
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 4x4:4
WI2 antenna connector: RP-SMA
ETH chip1: Broadcom BCM63138
Switch: Broadcom BCM63138
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1
abgn+ac
Additional chips
DECT SoC;DSP Group;DCX81;DCX81AC0CFAE3FNC, DSPG, PM1M36.0C, TMCI29D0003A 1435, TMCT10D;1;
DECT Flash;Winbond;W25Q80;Winbond, 25Q80BVSIG, 1444;1;
VoIP Chip;Microsemi;ZL88601;ZL88601, Z D (e3), 1426MAE;1;;64-pin QFN;9x9;
Stock bootloader: U-Boot 37.4.0.28 Quantenna 7.21.3.1-138B0-full
Stock FW OS: Linux 2.6.35.12 Topaz 3.4.11-rt19 BCM
Flags: VDSL2, ADSL2+, Wave2, MU-MIMO, G.Vector, DECT, VoIP, Fiber Optic Link
Default SSID: Livebox_XXXX (2 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1297 additional devices
of which 2 are Orange devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 340 additional devices
of which 1 are Orange devices
| CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
|---|---|---|---|
| Orange Livebox + | Broadcom | Broadcom | Quantenna |
| Orange Livebox 2.0 | Ikanos | Atheros | |
| Orange Livebox 2.1 | Lantiq | Lantiq | |
| Orange Livebox 4 | Broadcom | Broadcom | Quantenna |
| Orange Livebox 5 | Broadcom | Broadcom | Quantenna |
| Orange Livebox 6 | Broadcom | Broadcom | Broadcom |
| Orange Livebox Next 2.2 | Lantiq | Broadcom | Broadcom |
| Orange Livebox Pro V2 | Ikanos | Atheros |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.
Orange Livebox 4
- OUI: B0:98:2B (Sagemcom Broadband SAS)
Serial
- 115200 8N1
Boot log
| • boot log (Broadcom) • >> |
|---|
----
BTRM
V1.6
PMCS
AFEL
PWRZ
MEML
PMCD
MEMP
CODE
ZBSS
MAIN
CACH
OTP?
OTPP
ROTB
SCBT
NAND
IMG?
IMGL
HDR?
HDRP
MCV?
KEY?
KEYA
MID?
MIDP
MCVA
SBI?
SBIA
PASS
----
HELO
4.1603-1.0.38-116.141
CPU0
PMCM
PMCS
AFEL
PWRZ
MEML
APMT
PMCD
L1CD
MMUI
CODE
ZBBS
MAIN
DRAM
NVRAM memcfg 0x507
MCB chksum 0xf66e5b14
DDR3-1600 CL11 512MBx2
memsys_init call phy init returns 0x00000000
MEMC init size 2 clock 6
memsys_init call shmoo returns 0x00000000
PASS
Version cfe-rom: 7.21.1.1
FPS0
SVOL
NGEO
FVLY
FVLY
RVOL
KEY1
RVOL
BTL?
BTLA
PASS
J2EP
Base: 4.16_03
CFE version 1.0.38-116.141 for BCM963138 (32bit,SP,LE)
Build Date: Mon Feb 22 19:28:20 CET 2016 (g602540@rmm-p1188518fl)
Copyright (C) 2000-2013 Broadcom Corporation.
Version cfe-ram: 7.21.1.1
Init SSD1322 version 0.3.0
Boot Strap Register: 0x7dfdfc2f
Chip ID: BCM63136B0, ARM Cortex A9 Dual Core: 1000MHz
Total Memory: 1073741824 bytes (1024MB)
NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NAND flash device: Spansion S34ML04G1, id 0x01dc block 128KB size 524288KB
pmc_init:PMC using DQM mode
Board IP address : 192.168.100.1:ffffff00
Host IP address : 192.168.100.100
Gateway IP address :
Run from flash/host/tftp (f/h/c) : f
Default host run file name :
Default host flash file name : tpr,
Boot delay (0-9 seconds) : 1
Default host ramdisk file name :
Default ramdisk store address : ux
Board Id (0-24) : MIB4
Number of MAC Addresses (1-32) : 10
Base MAC Address : ac:84:c9:25:ab:32
PSI Size (1-64) KBytes : 24
Enable Backup PSI [0|1] : 0
System Log Size (0-256) KBytes : 0
Auxillary File System Size Percent: 0
MC memory allocation (MB) : 4
TM memory allocation (MB) : 20
WLan Feature : 0x00
Voice Board Configuration (0-2) : SI32176
pmc_switch_power_up: Rgmii Tx clock zone1 enable 1 zone2 enable 0.
Info: Disabling Eth Port4
LINK DOWN IMP Port
Creating CPU ring for queue number 0 with 32 packets descriptor=0x00f8718c
Done initializing Ring 0 Base=0x42a1ba40K End=0x42a1bc40K calculated entries= 32 RDD Base=0x02a1ba40K descriptor=0x00f8718c
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1�1�0
Initializing UBI to launch u-boot!
Running UbiScan...
Found 837 UBI logical blocks on NAND
UBI Layout volume is on logical block fd7
initialize_ubi...cferam reading uboot ======================= !!!
UBI volume uboot has id 3
read 950720 bytes from UBI volume 3
We got aes_key1
UBI volume aes_key2 has id 9
We got aes_key2 enc
read 64 bytes from UBI volume 9
Ubi U-Boot Entry at 0x00100000
Closing network.
Starting program at 0x00100000
U-Boot 2011.12 (Mar 03 2016 - 15:12:52)
Version: 7.21.3.1-138B0-full
256MB-limited u-boot
DRAM: 1 GiB
NAND: 512 MiB
SSD1322: Framebuffer driver for Solomon Systech's "SSD1322"
OLED screen controller on Sagemcom's RGWs Grayscale Mode
SSD1322: Driver Version (v0.3.0)
Using default environment
In: serial
Out: serial
Err: serial
Creating 1 MTD partitions on "nand0":
0x0000000c0000-0x00001fb00000 : "mtd=1"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=1"
UBI: MTD device size: 506 MiB
UBI: number of good PEBs: 4050
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 256
UBI: number of internal volumes: 1
UBI: number of user volumes: 14
UBI: available PEBs: 2962
UBI: total number of reserved PEBs: 1088
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 70/2
Read 6632 bytes from volume permanent_param to 0df23ca8
Unable to retrive mac_addr from lanBaseMacAddr
mac_addr set according to wanBaseMacAddr
NVRAM MAC addr:ac84c925ab32
No need to update NVRAM mac addr
Net: pmc_init:PMC using DQM mode
Creating CPU ring for queue number 0 with 32 packets descriptor=0x0ffe46d4
Done initializing Ring 0 Base=0x4fa0c960 End=0x4fa0cb60
calculated entries= 32 RDD Base=0x0fa0c960 descriptor=0x0ffe46d4
BCM63xxx_RUN
sb3: sb3_sagem_init()
sb3: action: 1007
sb3: sb3_wait_for_magic()
sb3: action: 1002
Aes_key2 is available
Read 64 bytes from volume aes_key_operator to 0dedee6c
sb3: sb3_boot( operational )
sb3: top available addr 0x0ddd0000, ram available = 0xcdd0000
sb3: read image operational size=2efc000 to address=aed0000
sb3_load_ubivol: max_load_size=215810048
Read 49266688 bytes from volume operational to 0aed0000
sb3: image operational has gsdf format
sb3: image operational signature OK
sb3: No pre-boot commands
sb3: setting kernel args
bootm AEEF000
## Booting kernel from Legacy Image at 0aeef000 ...
Image Name: FTFR_2.19.2
Created: 2016-10-07 17:44:32 UTC
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 3211264 Bytes = 3.1 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
SAGEMCOM reserve top mem 3fa00000-40000000
Memory policy: ECC disabled, Data cache writealloc
creating a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL
creating a MT_MEMORY_NONCACHED device at physical address of 0x0ea00000 to virtual address at 0xcea00000 with size of 0x1400000 byte for RDPA tm
creating a MT_MEMORY_NONCACHED device at physical address of 0x0e600000 to virtual address at 0xce600000 with size of 0x400000 byte for RDPA mc
On node 0 totalpages: 253952
free_area_init_node: node 0, pgdat c05feba0, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1488 pages used for memmap
Normal zone: 182320 pages, LIFO batch:31
HighMem zone: 528 pages used for memmap
HighMem zone: 65520 pages, LIFO batch:15
pmc_init:PMC using DQM mode
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B
PERCPU: Embedded 7 pages/cpu @c1809000 s5632 r8192 d14848 u32768
pcpu-alloc: s5632 r8192 d14848 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251904
Kernel command line: console=ttyS0,115200 earlyprintk debug root=mtd:rootfs init=/etc/preinit ro rootfstype=squashfs console=tty3 rootfs_offset=0x00345000 rootfs_size=0x02bb7000 uboot_ubivol=uboot mtdparts=nand:768k(bcm),5120k@-5120k(data),-@768k(partAll) ubi.mtd=ubi part_main=partAll part_boot=partAll image_ubivol=operational secure board_type=00030020 oek=0dee2a40 oiv=0dee3a78
UBI image volume: "operational"
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 230MB 762MB = 992MB total
Memory: 998256k/998256k available, 50320k reserved, 264192K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc05897f8 (5638 kB)
.init : 0xc058a000 - 0xc05b1600 ( 158 kB)
.data : 0xc05b2000 - 0xc05ffa40 ( 311 kB)
.bss : 0xc05ffa64 - 0xc0641560 ( 263 kB)
Preemptible hierarchical RCU implementation.
Dump stacks of tasks blocking RCU-preempt GP.
NR_IRQS:256
Cortex A9 MPCORE GIC init
DIST at fc01f000, CPU_IF at fc01e100
sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 4294967295ms
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.11-rt19 (jenkins@sahwbld04) (gcc version 4.6.2 (crosstool-NG
git+ab5c880 - SoftAtHome 1.0.2) ) #1 SMP PREEMPT Fri Oct 7 19:23:22 CEST 2016
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: BCM963138
bootconsole [earlycon0] enabled
SAGEMCOM reserve top mem 3fa00000-40000000
Memory policy: ECC disabled, Data cache writealloc
creating a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL
creating a MT_MEMORY_NONCACHED device at physical address of 0x0ea00000 to virtual address at 0xcea00000 with size of 0x1400000 byte for RDPA tm
creating a MT_MEMORY_NONCACHED device at physical address of 0x0e600000 to virtual address at 0xce600000 with size of 0x400000 byte for RDPA mc
On node 0 totalpages: 253952
free_area_init_node: node 0, pgdat c05feba0, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1488 pages used for memmap
Normal zone: 182320 pages, LIFO batch:31
HighMem zone: 528 pages used for memmap
HighMem zone: 65520 pages, LIFO batch:15
pmc_init:PMC using DQM mode
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B
PERCPU: Embedded 7 pages/cpu @c1809000 s5632 r8192 d14848 u32768
pcpu-alloc: s5632 r8192 d14848 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251904
Kernel command line: console=ttyS0,115200 earlyprintk debug root=mtd:rootfs init=/etc/preinit ro rootfstype=squashfs console=tty3 rootfs_offset=0x00345000 rootfs_size=0x02bb7000 uboot_ubivol=uboot mtdparts=nand:768k(bcm),5120k@-5120k(data),-@768k(partAll) ubi.mtd=ubi part_main=partAll part_boot=partAll image_ubivol=operational secure board_type=00030020 oek=0dee2a40 oiv=0dee3a78
UBI image volume: "operational"
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 230MB 762MB = 992MB total
Memory: 998256k/998256k available, 50320k reserved, 264192K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc05897f8 (5638 kB)
.init : 0xc058a000 - 0xc05b1600 ( 158 kB)
.data : 0xc05b2000 - 0xc05ffa40 ( 311 kB)
.bss : 0xc05ffa64 - 0xc0641560 ( 263 kB)
Preemptible hierarchical RCU implementation.
Dump stacks of tasks blocking RCU-preempt GP.
NR_IRQS:256
Cortex A9 MPCORE GIC init
DIST at fc01f000, CPU_IF at fc01e100
sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 4294967295ms
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.11-rt19 (jenkins@sahwbld04) (gcc version 4.6.2 (crosstool-NG
git+ab5c880 - SoftAtHome 1.0.2) ) #1 SMP PREEMPT Fri Oct 7 19:23:22 CEST 2016
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: BCM963138
bootconsole [earlycon0] enabled
SAGEMCOM reserve top mem 3fa00000-40000000
(...)
|
| • boot log (Quantenna) • >> |
|---|
Quantenna Mini U-Boot
Version: v37.4.0.28 Built: janv. 14 2016 at 14:29:56
br
1G-FD
Using br device
TFTP from server 1.1.1.1; our IP address is 1.1.1.2
Filename 'u-boot.bin'.
Load address: 0x88000000
Loading: *�Quantenna Mini U-Boot
Version: v37.4.0.28 Built: janv. 14 2016 at 14:29:56
br
1G-FD
Using br device
TFTP from server 1.1.1.1; our IP address is 1.1.1.2
Filename 'u-boot.bin'.
Load address: 0x88000000
Loading: *�#####
done
Bytes transferred = 71872 (0x118c0)
Boot reached stage 13
Boot reached stage 12
Valid CRC found in flash restoring env...
Boot reached stage 11
hw_config_id 65535: 'MIB4_MS_MAC_DUAL_0x1F831F83'
Cold boot
Reset status: 0x00000001
Info: data uncached: addr=0xc0000000 size=1024MB
Info: text at 0x88040000, stack at 0x88013ffc(8192),
heap at 0x88000000(73728), uboot size 177872
Info: i-cache is enabled
Info: d-cache is enabled
Info: CPU freq is 500000000, dev freq is 125000000
Info: Quantenna U-Boot version:v37.4.0.28
Info: build date 'Jun 29 2016', time '15:33:42'
SPI flash info:
name : mx25l512e
jedec_id : 0xc22010
sector size : 4096
number of sector : 16
frequency : 104000000
flags : 0x2
lock :
DDR_INIT: type = 16, speed = 2, size = 134217728
500MHz
BDA at 0x80002000
In: serial
Out: serial
Err: serial
Boot reached stage 64
Boot reached stage 65
br
Hit any key to stop autoboot: 2 ��� 1 ��� 0
Boot reached stage 80
1G-FD
1G-FD
Using br device
TFTP from server 1.1.1.1; our IP address is 1.1.1.2
Filename 'topaz-linux.lzma.img'.
Load address: 0x83000000
Loading: *�########################################
done
Bytes transferred = 5029322 (0x4cbdca)
Boot reached stage 81
Boot reached stage 84
Boot reached stage 1
## Booting kernel from Legacy Image at 83000000 ...
Boot reached stage 2
Boot reached stage 3
Image Name: topaz-linux
Image Type: arc Linux Kernel Image (lzma compressed)
Data Size: 5021130 Bytes = 4.8 MB
Load Address: 8493a000
Entry Point: 8493a000
Qtn flags: 00000001
Verifying Checksum ... OK
Boot reached stage 4
Boot reached stage 5
Boot reached stage 6
Boot reached stage 14
Uncompressing Kernel Image ... OK
Boot reached stage 7
Boot reached stage 8
Command line TAG setup
Params->u.cmdline.cmdline console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
p console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
## Unset TAG qtn_flags 1
## Transferring control to Linux (at address 8493a000) ATAG parameters 88068dd0 - 88068e28...
[ 0.000000] Linux version 2.6.35.12 (sahverotech3@sahwcmp0068)
(gcc version 4.2.1 (ARC_2.3)) #2 Thu Oct 6 15:13:29 CEST 2016
[ 0.000000] Parsing ATAG parameters from bootloader
[ 0.000000] ATAG_CORE: successful parsing
[ 0.000000] ATAG_CMDLINE: command line = console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
[ 0.000000] Board id: 65535
[ 0.000000] ATAG_HW_CONFIG_ID: hw_config_id = 65535
[ 0.000000]
[ 0.000000] Processor Family: ARC 700 [0x33]
[ 0.000000] CPU speed : 500.00 Mhz
[ 0.000000] Timers: TIMER1 TIMER0
[ 0.000000] Interrupt Vect Base: 0x88052c00
[ 0.000000] Peripheral Base: NOT present; assuming 0xCOFC0000
[ 0.000000] Data UNCACHED Base (I/O): start 0xc0 Sz, 1024 MB
[ 0.000000] ARC700 MMU Ver [2]
[ 0.000000] PAGE SIZE 8k
[ 0.000000] JTLB 128 x 2 = 256 entries
[ 0.000000] uDTLB 8 entr, uITLB 4 entr
[ 0.000000] TLB Refill "will NOT" Flush uTLBs
[ 0.000000] Detected I-cache :
[ 0.000000] Type=2 way set-assoc, Line length=32, Size=16K (enabled)
[ 0.000000] Detected D-cache :
[ 0.000000] Type=4 way set-assoc, Line length=32, Size=16K (enabled)
[ 0.000000] Extensions:
[ 0.000000] MPY: 32x32 with ANY Result Reg MAC MPY: Dual 16 x 16 and 32 x 16
[ 0.000000] DCCM: N/A ICCM: N/A
[ 0.000000] CRC: N/A, SWAP: Present NORM: Present
[ 0.000000] Min-Max: Present, Barrel Shifter: Present
[ 0.000000] Ext Arith Insn: Present
[ 0.000000] Floating Point Extension: N/A
[ 0.000000] On node 0 totalpages: 16383
[ 0.000000] free_area_init_node: node 0, pgdat 8581dd1c, node_mem_map 858cc024
[ 0.000000] Normal zone: 72 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16311 pages, LIFO batch:3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16311
[ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
[ 0.000000] bootconsole [ruby_early0] enabled
[ 0.000000] PID hash table entries: 512 (order: -2, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 3, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 2, 32768 bytes)
[ 0.000000] Memory: 39392KB available (2154K code,1197K data, 12584K init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] clockevent mode switch to [1]
[ 0.000000] clockevent mode switch to [2]
[ 0.000000] Calibrating delay loop... 249.03 BogoMIPS (lpj=622592)
[ 0.115000] pid_max: default: 4096 minimum: 301
[ 0.120000] Mount-cache hash table entries: 1024
[ 0.125000] Starting run_ksoftirqd, stack (thread_info) at 85842000 cpu 0
[ 0.130000] NET: Registered protocol family 16
[ 0.135000] Topaz heap in SRAM 88016780<->88020000, B2 BASE 17800
[ 0.150000] bio: create slab <bio-0> at 0
[ 0.155000] watch64: 2003/08/22 Josef 'Jeff' Sipek <jeffpc@xxxxxxxxxxxxx>
[ 0.160000] watch64: Enabling Watch64 extensions...done.
[ 0.165000] Switching to clocksource ARC Timer1
[ 0.175000] NET: Registered protocol family 2
[ 0.180000] IP route cache hash table entries: 2048 (order: 0, 8192 bytes)
[ 0.185000] TCP established hash table entries: 4096 (order: 2, 32768 bytes)
[ 0.190000] TCP bind hash table entries: 4096 (order: 1, 16384 bytes)
[ 0.195000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.200000] TCP reno registered
[ 0.205000] NET: Registered protocol family 1
[ 0.695000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.705000] msgmni has been set to 76
[ 0.705000] io scheduler noop registered (default)
[ 1.135000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 1.145000] serial8250.0: ttyS0 at MMIO 0xf0000000 (irq = 48) is a 16550A
[ 1.155000] brd: module loaded
[ 1.165000] loop: module loaded
[ 1.170000] spi_flash: Force not to support Protect Mode
[ 1.175000] Creating 3 MTD partitions on "spi_flash":
[ 1.180000] 0x000000000000-0x000000005000 : "uboot"
[ 1.185000] 0x000000005000-0x00000000b000 : "uboot_env"
[ 1.195000] 0x00000000b000-0x000000010000 : "data"
[ 1.200000] spi_flash: SPI flash driver initialized successfully!
[ 1.205000] ruby_health loading
[ 1.205000] HBM pool: emac rx 0x0 to 0x8000, wmac rx 0x8000 to 0xa000
[ 1.720000] HBM meta: emac rx 0x63c040 to 0x6bc040, wmac rx 0x6bc080 to 0x6dc080
[ 1.725000] topaz_hbm_init_pool_list pool 0 pool_list 0x88000000 bus_range 0x6ec400 to 0x26ec400 sz 4096 count 8192
[ 1.725000] topaz_hbm_init_pool_list pool 1 pool_list 0x88008000 bus_range 0x26fc400 to 0x48fc400 sz 17408 count 2048
[ 1.725000] topaz_hbm_init_pool_list pool 3 pool_list 0x8800a000 bus_range 0x0 to 0x0 sz 0 count 4096
[ 1.730000] topaz_busmon_init success
[ 1.735000] topaz_temp_sens_init success
[ 1.740000] u32 classifier
[ 1.740000] input device check on
[ 1.745000] Actions configured
[ 1.750000] Netfilter messages via NETLINK v0.30.
[ 1.755000] nf_conntrack version 0.5.0 (615 buckets, 2460 max)
[ 1.760000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.765000] TCP cubic registered
[ 1.770000] NET: Registered protocol family 10
[ 1.775000] NET: Registered protocol family 17
[ 1.780000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 1.785000] All bugs added by David S. Miller <davem@redhat.com>
[ 1.790000] turn off boot console ruby_early0
|
See also
- Sagemcom Livebox 1.0 (Sagem)
- Sagemcom Livebox 1.1 (Sagem)
- Orange Livebox 1.2 (Mini)
- Sagemcom Livebox 2 (Sagem)
- Orange Livebox 2.0 (Sagem)
- Orange Livebox 2.1 (Arcadyan)
- Sagemcom Livebox 3 (Play)
- Orange Livebox 4 (Quantenna)
- Orange Livebox 5 (Quantenna)
- Orange Livebox Pro V1 (Thomson)
- Orange Livebox Pro V2 (Sagem)
- Sagemcom Livebox Pro V3 (Sagem)
- Sagemcom Livebox Pro V4 (Sagem)
- Orange Livebox Pro V4 (Sagemcom)
