Orange Pi One

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Orange Pi OPI One

(Est.) release date: January 2016
(Est.) initial retail price (in USD): $10
Country of manuf.: China

Amazon image

ASIN
B01CXE2SMS (Flag of the United States.svg, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: single-board computer

Power: 5 VDC, 2 A
Connector type: barrel
Conn. measurements: 4.0 mm (OD), 1.7 mm (ID)

CPU1: Allwinner H3 (1.3 GHz, 4 cores)
FLA1: 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (Brand? Model?)
RAM1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Samsung K4B2G1646F-BYNA × 2)

Expansion IFs: USB 2.0, MicroSD Card slot
USB ports: 1
Serial: yes, 3-pin header, (115200,8,N,1)

ETH chip1: Allwinner H3
LAN speed: 100M
LAN ports: 1

Stock bootloader: U-Boot

Stock FW OS: Linux

Flags: HDMI out, camera in, GPIO

Default login user: root
Default login password: orangepi
root:orangepi credentials used by 11 additional devices
of which 11 are Orange Pi devices

Ethernet OUI: none specified

 CPU1 brandFLA1RAM1
Orange Pi OneAllwinner0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br />512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
Orange Pi One PlusAllwinner0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br />1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br />

For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.


Open-source Single-board Computer

Product page

Boot log (Armbian)

 • bootlog • >>
U-Boot SPL 2017.01-armbian (Feb 02 2017 - 02:59:11)
DRAM: 512 MiB
Trying to boot from MMC1

U-Boot 2017.01-armbian (Feb 02 2017 - 02:59:11 +0100) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi One
DRAM:  512 MiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   phy interface0
eth0: ethernet@1c30000
Hit any key to stop autoboot:  0 
6944 bytes read in 182 ms (37.1 KiB/s)
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2652 bytes read in 223 ms (10.7 KiB/s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
123 bytes read in 155 ms (0 Bytes/s)
3813144 bytes read in 568 ms (6.4 MiB/s)
4754648 bytes read in 652 ms (7 MiB/s)
** File not found /boot/.next **
** File not found .next **
34704 bytes read in 558 ms (60.5 KiB/s)
## Loading init Ramdisk from Legacy Image at 43300000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    3813080 Bytes = 3.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
Using machid 0x1029 from environment

Starting kernel ...

[sun8i_fixup]: From boot, get meminfo:

	Start:	0x40000000

	Size:	512MB

ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1

ion_reserve_select: ion chipid  [0x2c00081!

ion_reserve_common: ion reserve: [0x56000000, 0x60000000]!

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.113-sun8i (root@devel) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017
[    0.000000] cma: CMA: reserved 160 MiB at 56000000
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0f5c000 s11968 r8192 d12608 u32768
[    0.000000] Kernel command line: root=UUID=d9ddeb3b-5fca-46d8-857a-96eb4cb8ffbc rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=7 ubootpart=9781060c-01 ubootsource=mmc   sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 1048576 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 512MB = 512MB total
[    0.000000] Memory: 338864k/338864k available, 185424k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08d0a9c   (8995 kB)
[    0.000000]       .init : 0xc08d1000 - 0xc0924ec0   ( 336 kB)
[    0.000000]       .data : 0xc0926000 - 0xc0995d30   ( 448 kB)
[    0.000000]        .bss : 0xc09964e4 - 0xc0ac97c8   (1229 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:544
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.001073] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[    0.001141] pid_max: default: 32768 minimum: 301
[    0.001324] Security Framework initialized
[    0.001366] AppArmor: AppArmor disabled by boot time parameter
[    0.001577] Mount-cache hash table entries: 512
[    0.002590] Initializing cgroup subsys cpuacct
[    0.002629] Initializing cgroup subsys memory
[    0.002695] Initializing cgroup subsys devices
[    0.002726] Initializing cgroup subsys freezer
[    0.002755] Initializing cgroup subsys blkio
[    0.002796] Initializing cgroup subsys perf_event
[    0.002897] CPU: Testing write buffer coherency: ok
[    0.002970] ftrace: allocating 24851 entries in 73 pages
[    0.030315] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.030359] [sunxi_smp_prepare_cpus] enter
[    0.030407] Setting up static identity map for 0x4061fbf8 - 0x4061fc50
[    0.031398] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.031530] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.040503] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.040624] Brought up 4 CPUs
[    0.040624] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[    0.041009] devtmpfs: initialized
[    0.052239] wakeup src cnt is : 2. 
[    0.052330] sunxi pm init
[    0.052487] pinctrl core: initialized pinctrl subsystem
[    0.058987] NET: Registered protocol family 16
[    0.061462] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.061575] script_sysfs_init success
[    0.062526] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[    0.063728] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[    0.064825] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.064864] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.065067] script config pll_video to 297 Mhz
[    0.065096] script config pll_de to 864 Mhz
[    0.065140] script config pll_ve to 402 Mhz
[    0.070240] bio: create slab <bio-0> at 0
[    0.070339] [ARISC] :sunxi-arisc driver v1.04
[    0.089076] [ARISC] :arisc version: [v0.1.58]
[    0.176320] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
[    0.177966] SCSI subsystem initialized
[    0.177966] usbcore: registered new interface driver usbfs
[    0.177966] usbcore: registered new interface driver hub
[    0.180046] usbcore: registered new device driver usb
[    0.180176] twi_chan_cfg()340 - [twi0] has no twi_regulator.
[    0.180204] twi_chan_cfg()340 - [twi1] has no twi_regulator.
[    0.180230] twi_chan_cfg()340 - [twi2] has no twi_regulator.
[    0.180230] Linux video capture interface: v2.00
[    0.180294] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.181083] cfg80211: Calling CRDA to update world regulatory domain
[    0.181161] NetLabel: Initializing
[    0.181161] NetLabel:  domain hash size = 128
[    0.181161] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.181161] NetLabel:  unlabeled traffic allowed by default
[    0.181161] Switching to clocksource arch_sys_counter
[    0.193561] FS-Cache: Loaded
[    0.193885] CacheFiles: Loaded
[    0.205420] NET: Registered protocol family 2
[    0.216662] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.217259] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.217531] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[    0.217821] TCP: Hash tables configured (established 16384 bind 16384)
[    0.217848] TCP: reno registered
[    0.217870] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.217910] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.218257] NET: Registered protocol family 1
[    0.218705] RPC: Registered named UNIX socket transport module.
[    0.218737] RPC: Registered udp transport module.
[    0.218758] RPC: Registered tcp transport module.
[    0.218779] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.219006] Trying to unpack rootfs image as initramfs...
[    0.459368] Freeing initrd memory: 3720K
[    0.460112] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
[    0.460271] sunxi_reg_init enter
[    0.461231] audit: initializing netlink socket (disabled)
[    0.461307] type=2000 audit(0.460:1): initialized
[    0.463300] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.463729] NFS: Registering the id_resolver key type
[    0.464145] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.464179] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.464958] NTFS driver 2.1.30 [Flags: R/W].
[    0.465305] fuse init (API version 7.18)
[    0.465744] msgmni has been set to 989
[    0.467253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.467298] io scheduler noop registered
[    0.467318] io scheduler deadline registered
[    0.467392] io scheduler cfq registered (default)
[    0.467816] [DISP]disp_module_init
[    0.468140] cmdline,init_disp=
[    0.468187] cmdline,disp=
[    0.476002] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed!
[    0.492447] Console: switching to colour frame buffer device 160x45
[    0.510103] [DISP]disp_module_init finish
[    0.510480] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[    0.510987] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    0.511177] sw_uart_pm()890 - uart0 clk is already enable
[    0.511348] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[    0.622909] console [ttyS0] enabled
[    1.134752] brd: module loaded
[    1.138743] loop: module loaded
[    1.258576] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
[    1.258589] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator.
[    1.259214] spi spi0: master is unqueued, this is deprecated
[    1.259543] tun: Universal TUN/TAP device driver, 1.6
[    1.259551] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.260556] PPP generic driver version 2.4.2
[    1.260772] PPP BSD Compression module registered
[    1.260782] PPP Deflate Compression module registered
[    1.263507] PPP MPPE Compression module registered
[    1.263521] NET: Registered protocol family 24
[    1.263594] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.283692] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.283727] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[    1.427742] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[    1.610035] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[    1.787412] hub 1-0:1.0: USB hub found
[    1.952190] hub 1-0:1.0: 1 port detected
[    2.060255] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.074362] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
[    2.088471] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
[    2.120034] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
[    2.132308] hub 2-0:1.0: USB hub found
[    2.141540] hub 2-0:1.0: 1 port detected
[    2.171229] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.185242] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
[    2.199232] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
[    2.230038] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
[    2.242187] hub 3-0:1.0: USB hub found
[    2.251373] hub 3-0:1.0: 1 port detected
[    2.280998] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.295009] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4
[    2.309063] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
[    2.340038] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
[    2.352280] hub 4-0:1.0: USB hub found
[    2.361661] hub 4-0:1.0: 1 port detected
[    2.371468] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.403486] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.417180] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5
[    2.430769] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[    2.504565] hub 5-0:1.0: USB hub found
[    2.513783] hub 5-0:1.0: 1 port detected
[    2.543446] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.556989] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6
[    2.570482] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
[    2.644568] hub 6-0:1.0: USB hub found
[    2.653743] hub 6-0:1.0: 1 port detected
[    2.683512] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.697201] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7
[    2.710796] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
[    2.784604] hub 7-0:1.0: USB hub found
[    2.793839] hub 7-0:1.0: 1 port detected
[    2.823599] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.837318] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8
[    2.850954] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
[    2.924530] hub 8-0:1.0: USB hub found
[    2.933831] hub 8-0:1.0: 1 port detected
[    2.943534] Initializing USB Mass Storage driver...
[    2.954184] usbcore: registered new interface driver usb-storage
[    2.965905] USB Mass Storage support registered.
[    2.976147] usbcore: registered new interface driver ums-alauda
[    2.987870] usbcore: registered new interface driver ums-cypress
[    2.999673] usbcore: registered new interface driver ums-datafab
[    3.011329] usbcore: registered new interface driver ums_eneub6250
[    3.023105] usbcore: registered new interface driver ums-freecom
[    3.034610] usbcore: registered new interface driver ums-isd200
[    3.046048] usbcore: registered new interface driver ums-jumpshot
[    3.057531] usbcore: registered new interface driver ums-karma
[    3.068700] usbcore: registered new interface driver ums-onetouch
[    3.080059] usbcore: registered new interface driver ums-realtek
[    3.091215] usbcore: registered new interface driver ums-sddr09
[    3.102191] usbcore: registered new interface driver ums-sddr55
[    3.113121] usbcore: registered new interface driver ums-usbat
[    3.124670] mousedev: PS/2 mouse device common for all mice
[    3.135394] sunxikbd_init failed. 
[    3.144089] ls_fetch_sysconfig_para: type err  device_used = -1073057456. 
[    3.156007] =========script_get_err============
[    3.165631] [RTC] WARNING: Rtc time will be wrong!!
[    3.175351] [RTC] WARNING: use *internal OSC* as clock source
[    3.186276] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[    3.198057] i2c /dev entries driver
[    3.207156] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18)
[    3.220972] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19)
[    3.234678] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a)
[    3.248290] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29)
[    3.261801] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a)
[    3.275286] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b)
[    3.288623] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    3.301877] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d)
[    3.315038] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e)
[    3.328124] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18)
[    3.341180] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19)
[    3.354094] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a)
[    3.366912] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29)
[    3.379644] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a)
[    3.392274] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b)
[    3.404871] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c)
[    3.417328] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d)
[    3.429692] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e)
[    3.441785] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[    3.451804] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
[    3.463253] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[    3.476732] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[    3.486062] timeout_to_interv, line 167
[    3.493395] interv_to_timeout, line 189
[    3.500670] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
[    3.513435] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.526503] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[    3.545193] no blue_led, ignore it!
[    3.553047] no led_0, ignore it!
[    3.560257] no led_1, ignore it!
[    3.567411] no led_2, ignore it!
[    3.574556] no led_3, ignore it!
[    3.581712] no led_4, ignore it!
[    3.588831] no led_5, ignore it!
[    3.595947] no led_6, ignore it!
[    3.603059] no led_7, ignore it!
[    3.611069] usbcore: registered new interface driver usbhid
[    3.620865] usbhid: USB HID core driver
[    3.633172] asoc: sndcodec <-> sunxi-codec mapping ok
[    3.643537] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly!
[    3.657784] [I2S]snddaudio cannot find any using configuration for controllers, return directly!
[    3.671338] [DAUDIO0] driver not init,just return.
[    3.684299] mmc0: new high speed SDHC card at address 1234
[    3.684362] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[    3.685744] oprofile: using arm/armv7-ca7
[    3.712086] u32 classifier
[    3.718827]     Performance counters on
[    3.718873] mmcblk0: mmc0:1234 SA04G 3.68 GiB 
[    3.735591]     input device check on
[    3.735699]  mmcblk0: p1
[    3.736258] mmcblk mmc0:1234: Card claimed for testing.
[    3.736271] mmc0:1234: SA04G 3.68 GiB 
[    3.768185]     Actions configured
[    3.776258] IPv4 over IPv4 tunneling driver
[    3.785717] TCP: bic registered
[    3.793439] TCP: cubic registered
[    3.801366] TCP: westwood registered
[    3.809608] TCP: highspeed registered
[    3.818013] TCP: hybla registered
[    3.826062] TCP: htcp registered
[    3.834029] TCP: vegas registered
[    3.842125] TCP: veno registered
[    3.850148] TCP: scalable registered
[    3.858445] TCP: lp registered
[    3.866017] TCP: yeah registered
[    3.873647] TCP: illinois registered
[    3.881585] Initializing XFRM netlink socket
[    3.890530] NET: Registered protocol family 10
[    3.900656] NET: Registered protocol family 17
[    3.909464] NET: Registered protocol family 15
[    3.918130] Registering the dns_resolver key type
[    3.927536] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    3.939722] ThumbEE CPU extension supported.
[    3.948141] Registering SWP/SWPB emulation handler
[    3.957809] registered taskstats version 1
[    3.966677] cmdline,disp=
[    4.004846] ths_fetch_sysconfig_para: type err  device_used = 1. 
[    4.016980] CPU Budget:corekeeper enabled
[    4.025965] CPU Budget:Register notifier
[    4.034449] CPU Budget:register Success
[    4.042851] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[    4.060656] ALSA device list:
[    4.068245]   #0: audiocodec
[    4.075673]   #1: sndhdmi
[    4.083513] Freeing init memory: 332K
Loading, please wait...
[    4.133621] systemd-udevd[97]: starting version 215
[    4.610054] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=5
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... [    5.007313] Btrfs loaded
Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.25.2
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 
/dev/mmcblk0p1: recovering journal
/dev/mmcblk0p1: clean, 47701/218624 files, 277133/915200 blocks
done.
[    7.005157] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[    8.330331] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    8.350203] systemd[1]: Detected architecture 'arm'.

Welcome to �[1mDebian GNU/Linux 8 (jessie)�[0m!

[    8.412685] systemd[1]: Set hostname to <orangepione>.
[    8.851535] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    8.880867] systemd[1]: Expecting device dev-ttyS0.device...
         Expecting device dev-ttyS0.device...
[    8.910177] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.924225] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.938008] systemd[1]: Starting Remote File Systems (Pre).
[�[32m  OK  �[0m] Reached target Remote File Systems (Pre).
[    8.970131] systemd[1]: Reached target Remote File Systems (Pre).
[    8.982357] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    8.996928] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    9.011406] systemd[1]: Starting Paths.
[�[32m  OK  �[0m] Reached target Paths.
[    9.040129] systemd[1]: Reached target Paths.
[    9.050640] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[�[32m  OK  �[0m] Set up automount Arbitrary Executable File Formats F...utomount Point.
[    9.090130] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.106567] systemd[1]: Starting Encrypted Volumes.
[�[32m  OK  �[0m] Reached target Encrypted Volumes.
[    9.140114] systemd[1]: Reached target Encrypted Volumes.
[    9.152154] systemd[1]: Starting Swap.
[�[32m  OK  �[0m] Reached target Swap.
[    9.180122] systemd[1]: Reached target Swap.
[    9.190889] systemd[1]: Starting Root Slice.
[�[32m  OK  �[0m] Created slice Root Slice.
[    9.220121] systemd[1]: Created slice Root Slice.
[    9.231386] systemd[1]: Starting Delayed Shutdown Socket.
[�[32m  OK  �[0m] Listening on Delayed Shutdown Socket.
[    9.260122] systemd[1]: Listening on Delayed Shutdown Socket.
[    9.272636] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[�[32m  OK  �[0m] Listening on /dev/initctl Compatibility Named Pipe.
[    9.310120] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.324157] systemd[1]: Starting Journal Socket (/dev/log).
[�[32m  OK  �[0m] Listening on Journal Socket (/dev/log).
[    9.360127] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.372880] systemd[1]: Starting User and Session Slice.
[�[32m  OK  �[0m] Created slice User and Session Slice.
[    9.400130] systemd[1]: Created slice User and Session Slice.
[    9.412738] systemd[1]: Starting udev Control Socket.
[�[32m  OK  �[0m] Listening on udev Control Socket.
[    9.440136] systemd[1]: Listening on udev Control Socket.
[    9.452305] systemd[1]: Starting udev Kernel Socket.
[�[32m  OK  �[0m] Listening on udev Kernel Socket.
[    9.480133] systemd[1]: Listening on udev Kernel Socket.
[    9.492256] systemd[1]: Starting Journal Socket.
[�[32m  OK  �[0m] Listening on Journal Socket.
[    9.520125] systemd[1]: Listening on Journal Socket.
[    9.531787] systemd[1]: Starting System Slice.
[�[32m  OK  �[0m] Created slice System Slice.
[    9.560133] systemd[1]: Created slice System Slice.
[    9.571606] systemd[1]: Starting Increase datagram queue length...
         Starting Increase datagram queue length...
[    9.670725] systemd[1]: Starting Restore / save the current clock...
         Starting Restore / save the current clock...
[    9.800789] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    9.890812] systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
[    9.970830] systemd[1]: Starting Create list of required static device nodes for the current kernel...
         Starting Create list of required static device nodes...rrent kernel...
[   10.100780] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[   10.215837] systemd[1]: Started Set Up Additional Binary Formats.
[   10.228528] systemd[1]: Mounted Huge Pages File System.
[   10.240161] systemd[1]: Starting system-getty.slice.
[�[32m  OK  �[0m] Created slice system-getty.slice.
[   10.270203] systemd[1]: Created slice system-getty.slice.
[   10.281605] systemd[1]: Starting system-serial\x2dgetty.slice.
[�[32m  OK  �[0m] Created slice system-serial\x2dgetty.slice.
[   10.310139] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   10.327228] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[   10.430755] systemd[1]: Started File System Check on Root Device.
[   10.442778] systemd[1]: Starting LSB: Set keymap...
         Starting LSB: Set keymap...
[   10.550511] systemd[1]: Starting Slices.
[�[32m  OK  �[0m] Reached target Slices.
[   10.580174] systemd[1]: Reached target Slices.
[�[32m  OK  �[0m] Mounted Debug File System.
[   10.610156] systemd[1]: Mounted Debug File System.
[�[32m  OK  �[0m] Mounted POSIX Message Queue File System.
[   10.640161] systemd[1]: Mounted POSIX Message Queue File System.
[�[32m  OK  �[0m] Started Increase datagram queue length.
[   10.740139] systemd[1]: Started Increase datagram queue length.
[�[32m  OK  �[0m] Started Restore / save the current clock.
[   10.830160] systemd[1]: Started Restore / save the current clock.
[�[32m  OK  �[0m] Started Create list of required static device nodes ...current kernel.
[   10.920148] systemd[1]: Started Create list of required static device nodes for the current kernel.
[�[32m  OK  �[0m] Started Load Kernel Modules.
[   11.130199] systemd[1]: Started Load Kernel Modules.
[�[32m  OK  �[0m] Started LSB: Set keymap.
[   11.210157] systemd[1]: Started LSB: Set keymap.
[�[32m  OK  �[0m] Started udev Coldplug all Devices.
[   11.300141] systemd[1]: Started udev Coldplug all Devices.
[   11.313624] systemd[1]: Time has been changed
[   11.323312] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[   11.410848] systemd[1]: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[   11.530783] systemd[1]: Mounted Configuration File System.
[   11.542097] systemd[1]: Starting Create Static Device Nodes in /dev...
         Starting Create Static Device Nodes in /dev...
[   11.650778] systemd[1]: Starting Syslog Socket.
[�[32m  OK  �[0m] Listening on Syslog Socket.
[   11.680228] systemd[1]: Listening on Syslog Socket.
[   11.690351] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[�[32m  OK  �[0m] Started Journal Service.
[   11.830239] systemd[1]: Started Journal Service.
[�[32m  OK  �[0m] Mounted FUSE Control File System.
[�[32m  OK  �[0m] Started Apply Kernel Variables.
[�[32m  OK  �[0m] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[   12.221124] systemd-udevd[175]: starting version 215
[�[32m  OK  �[0m] Started udev Kernel Device Manager.
         Starting Copy rules generated while the root was ro...
         Starting LSB: Set preliminary keymap...
         Starting LSB: Tune IDE hard disks...
[   12.494090] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48)
[   12.508478] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48)
[�[32m  OK  �[0m] Started Copy rules generated while the root was ro.
[�[32m  OK  �[0m] Started LSB: Tune IDE hard disks.
[�[32m  OK  �[0m] Found device /dev/ttyS0.
[�[32m  OK  �[0m] Created slice system-ifup.slice.
[�[32m  OK  �[0m] Reached target Sound Card.
[�[32m  OK  �[0m] Started LSB: Set preliminary keymap.
         Starting Remount Root and Kernel File Systems...
[   13.095265] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[�[32m  OK  �[0m] Started Remount Root and Kernel File Systems.
[�[32m  OK  �[0m] Reached target Local File Systems (Pre).
         Mounting /tmp...
         Starting Load/Save Random Seed...
[�[32m  OK  �[0m] Mounted /tmp.
[�[32m  OK  �[0m] Started Load/Save Random Seed.
[�[32m  OK  �[0m] Reached target Local File Systems.
         Starting Armbian enhanced Log2Ram...
         Starting Create Volatile Files and Directories...
         Starting LSB: Raise network interfaces....
[�[32m  OK  �[0m] Reached target Remote File Systems.
         Starting Trigger Flushing of Journal to Persistent Storage...
         Starting LSB: Prepare console...
         Starting LSB: Restore and store ALSA driver settings...
[�[32m  OK  �[0m] Started Armbian enhanced Log2Ram.
[�[32m  OK  �[0m] Started Create Volatile Files and Directories.
[�[32m  OK  �[0m] Started LSB: Prepare console.
[�[32m  OK  �[0m] Started LSB: Restore and store ALSA driver settings.
         Starting LSB: Set console font and keymap...
         Starting Update UTMP about System Boot/Shutdown...
[   15.130775] systemd-journald[173]: Received request to flush runtime journal from PID 1
[�[32m  OK  �[0m] Started Trigger Flushing of Journal to Persistent Storage.
[�[32m  OK  �[0m] Started Update UTMP about System Boot/Shutdown.
[   15.437396] gmac0: probed
[   15.445248] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
[�[32m  OK  �[0m] Started LSB: Set console font and keymap.
3[�[32m  OK  �[0m] Started LSB: Raise network interfaces..
         Starting ifup for eth0...
[�[32m  OK  �[0m] Started ifup for eth0.
[�[32m  OK  �[0m] Reached target Network.
[�[32m  OK  �[0m] Reached target Network is Online.
[�[32m  OK  �[0m] Reached target System Initialization.
[�[32m  OK  �[0m] Listening on D-Bus System Message Bus Socket.
[�[32m  OK  �[0m] Reached target Sockets.
[�[32m  OK  �[0m] Reached target Timers.
[�[32m  OK  �[0m] Reached target Basic System.
         Starting Entropy daemon using the HAVEGE algorithm...
[�[32m  OK  �[0m] Started Entropy daemon using the HAVEGE algorithm.
         Starting OpenBSD Secure Shell server...
[�[32m  OK  �[0m] Started OpenBSD Secure Shell server.
         Starting System Logging Service...
         Starting Regular background program processing daemon...
[�[32m  OK  �[0m] Started Regular background program processing daemon.
         Starting /etc/rc.local Compatibility...
         Starting Login Service...
         Starting Permit User Sessions...
         Starting D-Bus System Message Bus...
[�[32m  OK  �[0m] Started D-Bus System Message Bus.
         Starting LSB: network connection manager...
         Starting LSB: Start/stop sysstat's sadc...
         Starting LSB: disk temperature monitoring daemon...
         Starting LSB: Load kernel modules needed to enable cpufreq scaling...
         Starting LSB: Advanced IEEE 802.11 management daemon...
         Starting LSB: Starts LIRC daemon....
         Starting LSB: Flightradar24 Decoder & Feeder...
         Starting LSB: Armbian gathering hardware information...
         Starting LSB: Start NTP daemon...
         Starting LSB: dump1090 initscript...
[�[32m  OK  �[0m] Started System Logging Service.
[�[32m  OK  �[0m] Started /etc/rc.local Compatibility.
[�[32m  OK  �[0m] Started Permit User Sessions.
[�[32m  OK  �[0m] Started LSB: network connection manager.
[�[32m  OK  �[0m] Started LSB: Start/stop sysstat's sadc.
[�[32m  OK  �[0m] Started LSB: disk temperature monitoring daemon.
[�[32m  OK  �[0m] Started LSB: Load kernel modules needed to enable cpufreq scaling.
[�[32m  OK  �[0m] Started LSB: Advanced IEEE 802.11 management daemon.
[�[32m  OK  �[0m] Started LSB: Starts LIRC daemon..
[�[32m  OK  �[0m] Started LSB: Flightradar24 Decoder & Feeder.
[�[32m  OK  �[0m] Started LSB: Armbian gathering hardware information.
[�[32m  OK  �[0m] Started LSB: Start NTP daemon.
         Starting LSB: set CPUFreq kernel parameters...
         Starting Getty on tty1...
[�[32m  OK  �[0m] Started Getty on tty1.
         Starting Serial Getty on ttyS0...
[�[32m  OK  �[0m] Started Serial Getty on ttyS0.
[�[32m  OK  �[0m] Reached target Login Prompts.
[�[32m  OK  �[0m] Started Login Service.
[�[32m  OK  �[0m] Started LSB: set CPUFreq kernel parameters.
         Starting LSB: Set sysfs variables from /etc/sysfs.conf...
[�[32m  OK  �[0m] Started LSB: Set sysfs variables from /etc/sysfs.conf.
[�[32m  OK  �[0m] Reached target Multi-User System.
[�[32m  OK  �[0m] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[�[32m  OK  �[0m] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux 8 orangepione ttyS0

Models

Orange Pi seriesList of SBCsAllwinnerRockchipRDAMediaTek
 • Orange Pi models • >>

Orange Pi 3 LTSAllwinner H6 • 4x ARM (Cortex-A53) @1.8GHz
Orange Pi 3BRockchip RK3566 • 4x ARM (Cortex-A55) @1.8GHz
Orange Pi 4 LTSRockchip RK3399-T • 2x ARM (Cortex-A72), 4x ARM (Cortex-A53) @1.6GHz
Orange Pi 4BRockchip RK3399 • 2x ARM (Cortex-A72), 4x ARM (Cortex-A53) @2.0GHz
Orange Pi 5BRockchip RK3588S • 4x ARM (Cortex-A76), 4x ARM (Cortex-A55) @2.4GHz
Orange Pi 5 PlusRockchip RK3588 • 4x ARM (Cortex-A76), 4x ARM (Cortex-A55) @2.4GHz
Orange Pi Lite 2Allwinner H6 • 4x ARM (Cortex-A53) @1.8GHz
Orange Pi Mini 2Allwinner H3 • 4x ARM (Cortex-A7) @1.3GHz
Orange Pi One PlusAllwinner H6 • 4x ARM (Cortex-A53) @1.8GHz
Orange Pi PC 2Allwinner H5 • 4x ARM (Cortex-A53) @1.2GHz
Orange Pi PC PlusAllwinner H3 • 4x ARM (Cortex-A7) @1.3GHz
Orange Pi Plus 2Allwinner H3 • 4x ARM (Cortex-A7) @1.3GHz
Orange Pi Plus 2EAllwinner H3 • 4x ARM (Cortex-A7) @1.3GHz • @
Orange Pi R1 PlusRockchip RK3328 • 4x ARM (Cortex-A53) @1.5GHz
Orange Pi R1 Plus LTSRockchip RK3328 • 4x ARM (Cortex-A53) @1.5GHz
Orange Pi Win PlusAllwinner A64 • 4x ARM (Cortex-A53) @1.2GHz
Orange Pi Zero LTSAllwinner H2+ • 4x ARM (Cortex-A7) @1.2GHz • @
Orange Pi Zero Plus 2Allwinner H3 • 4x ARM (Cortex-A7) @1.2GHz
Orange Pi Zero Plus 2 H5Allwinner H5 • 4x ARM (Cortex-A53) @1.2GHz
Orange Pi Zero 2WAllwinner H618 • 4x ARM (Cortex-A53) @1.5GHz
Orange Pi 3G-IoT-BMediaTek MT6572 • 2x ARM (Cortex-A7) @1.2GHz