OvisLink AirLive WN-200R
OvisLink WN-200R
Manuf (OEM/ODM): SerComm IP1006SR
FCC approval date: 21 January 2009
Type: wireless router
FCC ID: P27IP1006SR
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT3050 (320 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320DBTI-70G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech EM639165TS-6G)
Expansion IFs: none specified
WI1 chip1: Ralink RT3050
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: RP-SMA
ETH chip1: Ralink RT3050
Switch: Ralink RT3050
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Stock FW OS: Linux 2.6.21
Default SSID: airlive (6 addl. devices)
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 7 are OvisLink devices
Default login user: admin
Default login password: airlive
admin:airlive credentials used by 7 additional devices
of which 7 are OvisLink devices
FCC ID | |
---|---|
LevelOne WBR-6002 | P27IP1006SR |
SerComm IP1006SR | P27IP1006SR |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless b/g/n 150M Broadband Router
"YN700C-1.0" is silkscreened on the board.
- This device would seem to be a SerComm IP1006SR. The FCC ID of the IP1006SR has been assigned to this entry (there is no FCC ID on the label).
General info
• dmesg |
---|
Linux version 2.6.21 (root@apbs) (gcc version 3.3.6) #8 Wed Nov 24 17:55:04 CST 2010 The CPU feqenuce set to 320 MHz CPU revision is: 0001964c Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 0 pages used for memmap Built 1 zonelists. Total pages: 4064 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 16kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). Cache parity protection disabled cause = a0800064, status = 1100ff00 PID hash table entries: 64 (order: 6, 256 bytes) calculating r4koff... 00138800(1280000) CPU frequency 320.00 MHz Using 160.000 MHz high precision timer. Console: colour dummy device 80x25 Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Memory: 13240k/16384k available (2246k kernel code, 3144k reserved, 445k data, 132k init, 0k highmem) Calibrating delay loop... 212.99 BogoMIPS (lpj=425984) Mount-cache hash table entries: 512 NET: Registered protocol family 16 NET: Registered protocol family 2 Time: MIPS clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 512 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes) TCP: Hash tables configured (established 512 bind 512) TCP reno registered squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher squashfs: LZMA suppport for slax.org by jro io scheduler noop registered (default) FLASH_API: **********<<WARNING!!!!>>************** FLASH_API: Flash Not Support(MAN_ID=C2 DEV_ID=22A8) FLASH_API: **************************************** Ralink gpio driver initialized Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 ralink flash device: 0x1000000 at 0x1f000000 Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank Ralink SoC physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 Ralink SoC physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 Ralink SoC physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 4 MTD partitions on "Ralink SoC physically mapped flash": 0x00000000-0x00030000 : "Bootloader" 0x00030000-0x00040000 : "Config " 0x00040000-0x00160000 : "Kernel" 0x00160000-0x00400000 : "rootfs" GRE over IPv4 tunneling driver ip_conntrack version 2.4 (128 buckets, 1024 max) - 232 bytes per conntrack ip_conntrack_pptp version 3.1 loaded ip_nat_pptp version 3.0 loaded ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux ipt_random match loaded TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 132k freed Algorithmics/MIPS FPU Emulator v1.5 GDMA1_MAC_ADRH -- : 0x00000000 GDMA1_MAC_ADRL -- : 0x00000000 Ralink APSoC Ethernet Driver Initilization. v2.00 256 rx/tx descriptors allocated, mtu = 1500! GDMA1_MAC_ADRH -- : 0x0000000c GDMA1_MAC_ADRL -- : 0x432880cb PROC INIT OK! phy_tx_ring = 0x00846000, tx_ring = 0xa0846000 phy_rx_ring = 0x00000000, rx_ring = 0x00000000 RT305x_ESW: Link Status Changed CDMA_CSG_CFG = 81000007 GDMA1_FWD_CFG = 710000 eth2.1: add 01:00:5e:00:00:01 mcast address to master interface eth2.2: add 01:00:5e:00:00:01 mcast address to master interface eth2.1: dev_set_promiscuity(master, 1) device eth2 entered promiscuous mode device eth2.1 entered promiscuous mode eth2.1: del 01:00:5e:00:00:01 mcast address from vlan interface eth2.1: del 01:00:5e:00:00:01 mcast address from master interface eth2.1: Setting MAC address to 00 4f 74 31 74 e6. eth2.1: add 01:00:5e:00:00:01 mcast address to master interface br0: port 1(eth2.1) entering learning state br0: topology change detected, propagating br0: port 1(eth2.1) entering forwarding state rt2860v2_ap: module license 'unspecified' taints kernel. === pAd = c0020000, size = 500232 === <-- RTMPAllocAdapterBlock, Status=0 RX DESC a04e7000 size = 2048 <-- RTMPAllocTxRxRingMemory, Status=0 Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 1. Phy Mode = 9 2. Phy Mode = 9 FlashRead: 00040000 Out Of Scope 3. Phy Mode = 9 MCS Set = ff 00 00 00 01 Main bssid = 00:4f:74:31:74:e6 <==== rt28xx_init, Status=0 0x1300 = 00064380 device ra0 entered promiscuous mode br0: port 2(ra0) entering learning state br0: topology change detected, propagating br0: port 2(ra0) entering forwarding state Raul Debug receive RT_PRIV_IOCTL ... cmd = 0x753 |
• ps aux |
---|
ps aux PID Uid VmSize Stat Command 1 root 300 S init 2 root SWN [ksoftirqd/0] 3 root SW< [events/0] 4 root SW< [khelper] 5 root SW< [kthread] 6 root SW< [kblockd/0] 7 root SW< [kswapd0] 8 root SW [pdflush] 9 root SW [pdflush] 10 root SW< [aio/0] 11 root SW [mtdblockd] 55 root 280 S /sbin/klogd 117 root SW [RtmpCmdQTask] 118 root SW [RtmpWscTask] 126 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 129 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 130 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 131 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 138 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 140 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 141 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 142 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 150 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 151 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0 160 root 268 S /usr/sbin/mini_httpd -d /usr/www -r WN-200R -c *.cgi 165 root 296 S /usr/sbin/udhcpd /etc/udhcpd.conf 172 root 260 S /usr/sbin/ntp -z GMT+8 179 root 280 S /usr/sbin/crond 181 root 124 S /usr/sbin/scfgmgr 184 root 168 S /usr/sbin/Wan_ctrl 185 root 124 S /usr/sbin/cmd_agent_ap 186 root 208 S /usr/sbin/wizd 189 root 280 S /sbin/syslogd -f /tmp/syslog.conf 203 root 204 S /usr/sbin/pbc_app 204 root 280 S /usr/sbin/led_ctrl 205 root 224 S /usr/sbin/download 279 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4 283 root 196 S init 285 root 528 S /usr/sbin/pppoe-relay -C br0 -S eth2.2 286 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4 287 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4 289 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4 291 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4 292 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4 335 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4 365 root 192 S /usr/sbin/scfgmgr 1607 root 380 S sh -c ps aux 1608 root 332 R ps aux |
cat /proc/mtd
cat /proc/mtd dev: size erasesize name mtd0: 00030000 00010000 "Bootloader" mtd1: 00010000 00010000 "Config " mtd2: 00120000 00010000 "Kernel" mtd3: 002a0000 00010000 "rootfs"