Proxim RangeLAN-DS 802.11b Access Point (Model 8555)
Proxim 8555
Manuf (OEM/ODM): Samsung
Country of manuf.: Korea
Type: access point
Power: 5 VDC, 1.5 A
Connector type: barrel
CPU1: Samsung S3C4510
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (SST 39VF800A-70-4C-EK)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Samsung K4F151612C-TC60 × 2)
Expansion IFs: PCMCIA (16-bit)
PCMCIA slots: 1
Serial: DE-9, (57600,8,N,1)
WI1 module: Z-Com XI-300
WI1 module IF: PCMCIA (16-bit)
WI1 chip1: Harris HFA3841
WI1 chip2: Intersil Model?
WI1 chip3: Intersil Model?
WI1 802dot11 protocols: b
WI1 antenna connector: unknown
ETH chip1: Samsung S3C4510
ETH chip2: LevelOne LXT970AQC
LAN speed: 100M
LAN ports: 1
b
Default SSID: RangeLAN
Default login user: blank
Default login password: public
blank:public credentials used by 16 additional devices
of which 4 are Proxim devices
For a list of all currently documented Harris chipsets with specifications, see Harris.
For a list of all currently documented Samsung chipsets with specifications, see Samsung.
The device uses a RangeLAN-DS PC Card for the wireless module.
- It will also work with a Proxim Harmony 8430 (same parent OEM product).
This device is highly similar in appearance to the Samsung SWL-3000AP and appears
- to share the same serial configuration interface. Samsung is the presumed OEM.
The CPU is part S3C4510X01-QERO. There is a Lattice ispLSI5256VA on-board.
"REV:AP3000B" and "2000.05.23" is silkscreened on the board.
- This device has no web configuration interface.
The power adapter included with the device is a
- Ault Model PW 107 KA0502F02 (5V, 1.5A).
Serial
The default password for the serial console is public.
Boot log
AP Firmware version : 1.02 Checksum OK Loading firmware =================================================== Proxim AP Configuration Utility =================================================== To configure the Access Point, the password is required. Enter password: =================================================== Proxim AP Configuration Utility =================================================== To configure the Access Point, the password is required. Enter password:****** =================================================== Proxim AP Configuration Utility =================================================== [ ROOT ] 1. Basic [Menu] 2. Advanced [Menu] 3. Server [Menu] 4. Status [Menu] 5. Load default values 6. Save and reboot CMD(t,p,h):