Realtek RTL8197D-11AC Reference Design

Realtek RTL8197D-11AC Reference Design

FCC approval date: 03 January 2013

Type: wireless router

FCC ID: TX2-RTL8197D-11AC
IC ID: 6317A-RTL8197D-11AC

Power: 5 VDC, 3 A
Connector type: barrel

CPU1: Realtek RTL8197D
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128FVSG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Nanya NT5TU32M16DG-AC)

Expansion IFs: USB 2.0
USB ports: 2

WI1 chip1: Realtek RTL8812AR
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Realtek RTL8192CE
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL, RP-SMA

ETH chip1: Realtek RTL8197D
Switch: Realtek RTL8367RB
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1

abgn+ac

Default SSID: RTK 11n AP 2.4G
, RTK 11n AP 5G
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 0 are Realtek devices

802dot11 OUI: none specified

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

---

802.11a/b/g/n/ac RTL8197D+RTL8192CE+RTL8812AR AP Router

The Realtek logo and "RTL8197D+RTL8367RB+RTL8192CE+RTL8812A_V230" is silkscreened on the board in the FCC photos.

The 5GHz radio is using two Skyworks (SiGe) SE5022T / 5022T 5GHz Power Amplifiers and two Skyworks SKY85601s (SKY85601-11?) SPDT Switch w/ LNA modules.

The board is shown with a full size Mini PCIe slot (but no screw posts) in the photos.

Default settings (including the SSIDs) are per the FCC manual. I guess they may be relevant for lazy manufacturers who just stick the Realtek SDK on the their devices and do almost nothing else..

The power adapter shown in the FCC photos is a Powertron PA1024-1HUB (100-240VAC ~ 50-60Hz, 0.6A -> 5VDC, 3.0A, 15W max. | efficiency level V).

Wi-Fi Certified : WFA16991 (as of 06/11/2013)