Rosewill RNX-EasyN4

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Rosewill RNX-EasyN4

Manuf (OEM/ODM): Senao

FCC approval date: 13 October 2008
UPC: 898745018103 (UPC DB, On eBay)

Amazon image

ASIN
B002POHFQG (Flag of the United States.svg, On Amazon, On CCC)

Type: wireless router

FCC ID: U2M-SR97908003

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: Ralink RT3052 (384 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Brand? Model?)

Expansion IFs: none specified
Serial: yes, internal, pinout marked, unpopulated, 3.3V TTL, 6-pin header, (57600,8,N,1)

WI1 chip1: Ralink RT3052
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Ralink RT3052
Switch: Ralink RT3052
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6693;884, 6693, A913;2;

Stock bootloader: U-Boot

Stock FW OS: Linux

TPFirmware supported: DD-WRT • (List), OpenWrt (unofficially) • (List)

Default SSID: RosewillXXXXXX
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 4 are Rosewill devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 10 are Rosewill devices

802dot11 OUI: 00:02:6F (26 E, 63 W)
Ethernet OUI: 00:02:6F (26 E, 63 W)

 FCC ID
Allied Telesis AT-WR2304NU2M-SR97908003
EnGenius ERB9250U2M-SR97908003
EnGenius ESR-9752U2M-SR97908003
EnGenius ESR-9752BU2M-SR97908003
Encore ENHWI-2AN3U2M-SR97908003
MSI RG70AU2M-SR97908003

For a list of all currently documented Ralink chipsets with specifications, see Ralink.


Product page

This router is flashable to DD-WRT or OpenWrt (trunk, the ESR-9753 build seems to work fine), however, this will require serial access. There is no firmware currently available to allow flashing via the webGUI (see this forum thread for a utility to work with the firmware format).

The default SSID is RosewillXXXXXX where XXXXXX is the last three octets of the wireless interface MAC address (assumed capitalized hex letters).

Additional external links

"ESR-9752-1.00 LFP 7016A0251000" is silkscreened on the board shown.