Ruckus Wireless ZoneFlex 7055
Ruckus Wireless ZoneFlex 7055
Type: access point
FCC ID: S9GZF7055
IC ID: 5912A-ZF7055
Power: 48 VDC, 0.62 A
Connector type: barrel
CPU1: Atheros AR9344
FLA1: ? MiB (Spansion Model?)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5TU32M16DG-AC × 2)
Expansion IFs: none specified
WI1 chip1: Atheros AR9344
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Atheros AR9582
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: Atheros AR9344
ETH chip2: Atheros Model?
Switch: Atheros Model?
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn
Default IP address: 192.168.0.1 or If you have dhcp server the ap is getting ip addres from dhcp server.
Default login user: admin or super
Default login password: sp-admin
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
ZoneFlex 7055 Access Point
Per the FCC photos...
- The 2.4GHz radio (AR9344) is using 2x Skyworks ( / SiGe) SE2611T (2611T) 2.4GHz WLAN Front End ICs.
- The 5GHz radio (AR9582) is using 2x Skyworks ( / SiGe) SE5007T (5007T) 5GHz WLAN Front End ICs.
- RAM appears to be 2x Nanya NT5TU32M16DG-AC (64MB each, 128MB total)
- "Wall-E2_PD_Board V2.1" is silkscreened on the PoE board.
Manuf. by USI Shenzhen? (USI-SZ on the FCC sample label)
Default settings are per the FCC manual.
Presumed 8C:0C:90 OUI based on the label affixed to the FCC EUT (external photos)...
