Ruckus Wireless ZoneFlex 7363
Ruckus Wireless ZoneFlex 7363 (ZF7363)
Manuf (OEM/ODM): Senao
FCC approval date: 05 March 2010
Type: access point
FCC ID: S9GZF7363
IC ID: 5912A-ZF7363
Power: 12 VDC, 1 A
Connector type: barrel
PoE tag: 802.3af, standard
CPU1: Atheros AR7161 (680 MHz)
FLA1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Micron MT46V16M16-5B K × 2)
Expansion IFs: none specified
WI1 chip1: Atheros AR9223
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Atheros AR9220
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: none
ETH chip1: Atheros AR7161
Switch: Realtek RTL8363S
LAN speed: 100M
LAN ports: 2
WAN speed: 1GbE
WAN ports: 1
abgn
Stock bootloader: U-Boot 1.1.4.54
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 16 are Ruckus Wireless devices
Default login user: super
Default login password: sp-admin
super:sp-admin credentials used by 17 additional devices
of which 17 are Ruckus Wireless devices
802dot11 OUI: none specified
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Dual-Band Mid-Range 802.11n Wireless Access Point
- Indoor Dual-Band 802.11n AP, 14-Element Smart Antenna
- Product page • 7300 series data sheet
The Ruckus Wireless logo and "GD 11" is silkscreened on the board in the FCC photos.
- "FAB 100-11133-001 REV 3" is on the other side of the board.
Per the FCC manual, the default SSID format is WirelessX (where X is a number).
- Default credentials are per the FCC label.
Likely Atheros AR7161+AR9220+AR9223/AR9227 device..
1x 10/100/1000 PoE port + 2x 10/100 ports
