SAPIDO RB-1232
SAPIDO RB-1232
Manuf (OEM/ODM): E-TOP BR380n v3 <??>
(Est.) release date: April 2010
Country of manuf.: Taiwan
Type: wireless router
Power: 5 VDC, 1.5 A
Connector type: barrel
CPU1: Realtek RTL8196BU (390 MHz)
FLA1: 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6445EM2I-10G)
RAM1: 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (ESMT M12L2561616A-6T)
Expansion IFs: USB 2.0
USB ports: 1
JTAG: yes
Serial: yes, internal, 4-pin header, unpopulated, 3.3V TTL, (38400,8,N,1)
WI1 chip1: Realtek RTL8192SE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
ETH chip1: Realtek RTL8196BU
Switch: Realtek RTL8196BU
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Stock bootloader: rtkload
Stock FW OS: Linux
Default SSID: SAPIDO_All_Broadband_Router
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 2 are SAPIDO devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 2 are SAPIDO devices
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
N+ Broadband Router - All Broadbands
There appears to be a v1 and v2 of this device. I don't know what the difference between versions is..
"EPMBBR380NBXX3XX", "BR380n_MB_V30", and a date code of 1030 is silkscreened on the board of the particular unit populating this entry.
The default SSID of the wireless interface is SAPIDO_All_Broadband_Router. The default Universal Repeater Mode SSID is ESSID_SAPIDO_RB-1232. The default SSIDs for multi-SSID mode are Multiple_APX, where X is 1 through 4.
Serial
Pinout
The pinout would appear to be the following...
T1 [3.3] (TxD) (RxD) (GND)
Boot log
========== SPI ============= ---RealTek(RTL8196BU)at 2010.03.19-14:01+0800 version v1.4 [16bit](390MHz) Jump to image start=0x80500000... init started: BusyBox v1.8.2 (2010-08-20 09:42:30 CST) 693 HW configuration check OK! DS configuration check OK! CS configuration check OK! BR380n cat: can't open '/var/run/hsdpa.pid': No such file or directory cat: can't open '/var/run/hsdpadial.pid': No such file or directory You need to specify whom to kill You need to specify whom to kill Initialize wlan0 interface Initialize wlan0-va0 interface Initialize wlan0-va1 interface Initialize wlan0-va2 interface Initialize wlan0-va3 interface Setup BRIDGE interface cat: can't open '/etc/udhcpc/udhcpc-eth5.pid': No such file or directory [: 0: unknown operand killall: syslogd: no process killed killall: klogd: no process killed ifconfig: SIOCGIFFLAGS: No such device bridge br0 doesn't exist; can't delete it Setup bridge... ======buf_cache: add@/class/net/br0 route: SIOCDELRT: No such process route: SIOCDELRT: No such process route: SIOCDELRT: No such process route: SIOCDELRT: No such process route: SIOCDELRT: No such process route: SIOCDELRT: No such process WiFi Simple Config v1.14 (2010.08.20-01:43+0000). route: SIOCDELRT: No such process IEEE 802.11f (IAPP) using interface br0 (v1.7) Setup WAN interface killall: webs: no process killed <init.sh> User select WAN Type order is <1> killall: Autodetect: no process killed To start miniigd MiniIGD v1.07 (2010.08.20-01:44+0000). <init.sh> WAN Type is Ethernet, Wireless select WPS or WDS Mode ====== init.sh END ======= 2056 2057 2058 Password: Set web language to English
Included PSU(s)
The included power adapter for at least some units is a Channel Well Technology CAP008051.
| Channel Well Technology CAP008051 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC ~ 47-63 Hz, 0.25 A | |||||
| Input connector: NEMA 1-15P Style: medium, horiz. Manuf. in: China Eff. level: 5 | |||||
| Output: 5 VDC, 1.5 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||
