Samsung GT-I6410
Samsung GT-I6410
FCC approval date: 01 October 2009
Country of manuf.: Korea
FCC ID: A3LGTI6410
Power: 5 VDC, 1 A
Connector type: USB Female Micro-B
CPU1: Samsung S3C6410AH (266 MHz)
CPU2: Qualcomm MSM6246
FLA1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (Samsung KMAFG0000A-B998)
FLA2: 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Samsung KAC00F008M-AE77)
RAM1: 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Samsung KAC00F008M-AE77)
802dot11 WI1 chip 1: Brand? Model?
no Wi-Fi capability
Additional chips
Cellular RF Transceiver;Qualcomm;RTR6285;;1;
Bluetooth SoC;Broadcom;BCM2070B0;;1;
Categorized as: smartphone
Stock OS / FW: LiMo
Flags: Bluetooth, GSM, rear-facing camera, front-facing camera
OUI: none specified
Additional external links
- (similar HW [GT-S800x series], specs+components noted)
- (orig. link dead, via archive.org)
Images
Logs
• Log • >> |
---|
[2014-05-20 10:59:29] ****************************** [2014-05-20 10:59:30] Samsung Bootloader [2014-05-20 10:59:30] ****************************** [2014-05-20 10:59:30] [2014-05-20 10:59:30] Primitive Boot Loader(PBL) [2014-05-20 10:59:30] Copyright (C) SAMSUNG Corporation 2006-2008 [2014-05-20 10:59:30] [2014-05-20 10:59:30] PBL found bootable SBL PART : 3 [2014-05-20 10:59:30] check_quick_start_condition- Voltage: 3847.50000, Linearized[52/72], Capacity: 36 [2014-05-20 10:59:31] quick_start- quick start is executed! [2014-05-20 10:59:31] set usbpath to PDA.. [2014-05-20 10:59:31] [2014-05-20 10:59:31] ****************************************** [2014-05-20 10:59:31] Secondary Boot Loader(SBL) [2014-05-20 10:59:31] Copyright (C) SAMSUNG Corporation 2006-2009 [2014-05-20 10:59:31] BOARD NAME : VOLANS REV 06 Real [2014-05-20 10:59:31] ****************************************** [2014-05-20 10:59:31] [2014-05-20 10:59:31] 11 partitions loading success [2014-05-20 10:59:31] ==== PARTITION INFORMATION ==== [2014-05-20 10:59:31] ID : IBL & PBL (0x0) [2014-05-20 10:59:31] ATTR : RO (0x2) [2014-05-20 10:59:31] FIRST_BLK : 0 [2014-05-20 10:59:31] NO_BLKS : 2 [2014-05-20 10:59:31] =============================== [2014-05-20 10:59:31] ID : CSA (0x1) [2014-05-20 10:59:31] ATTR : RW (0x1) [2014-05-20 10:59:31] FIRST_BLK : 2 [2014-05-20 10:59:31] NO_BLKS : 48 [2014-05-20 10:59:31] =============================== [2014-05-20 10:59:31] ID : SBL (0x2) [2014-05-20 10:59:31] ATTR : RO (0x2) [2014-05-20 10:59:31] FIRST_BLK : 50 [2014-05-20 10:59:31] NO_BLKS : 10 [2014-05-20 10:59:31] =============================== [2014-05-20 10:59:31] ID : SBL2 (0x3) [2014-05-20 10:59:31] ATTR : RO (0x2) [2014-05-20 10:59:31] FIRST_BLK : 60 [2014-05-20 10:59:31] NO_BLKS : 10 [2014-05-20 10:59:31] =============================== [2014-05-20 10:59:31] ID : LFS (0x4) [2014-05-20 10:59:31] ATTR : RW (0x1) [2014-05-20 10:59:31] FIRST_BLK : 70 [2014-05-20 10:59:31] NO_BLKS : 40 [2014-05-20 10:59:31] =============================== [2014-05-20 10:59:31] ID : KERNEL (0x5) [2014-05-20 10:59:31] ATTR : RO (0x2) [2014-05-20 10:59:31] FIRST_BLK : 110 [2014-05-20 10:59:31] NO_BLKS : 40 [2014-05-20 10:59:31] =============================== [2014-05-20 10:59:31] ID : ROOTFS (0x6) [2014-05-20 10:59:31] ATTR : RO (0x2) [2014-05-20 10:59:31] FIRST_BLK : 150 [2014-05-20 10:59:31] NO_BLKS : 116 [2014-05-20 10:59:31] =============================== [2014-05-20 10:59:31] ID : FACTORYFS1 (0x7) [2014-05-20 10:59:31] ATTR : RO (0x2) [2014-05-20 10:59:31] FIRST_BLK : 266 [2014-05-20 10:59:31] NO_BLKS : 1360 [2014-05-20 10:59:32] =============================== [2014-05-20 10:59:32] ID : DATAFS (0x8) [2014-05-20 10:59:32] ATTR : RW (0x1) [2014-05-20 10:59:32] FIRST_BLK : 1626 [2014-05-20 10:59:32] NO_BLKS : 240 [2014-05-20 10:59:32] =============================== [2014-05-20 10:59:32] ID : MODEM (0x9) [2014-05-20 10:59:32] ATTR : RO (0x2) [2014-05-20 10:59:32] FIRST_BLK : 1866 [2014-05-20 10:59:32] NO_BLKS : 128 [2014-05-20 10:59:32] =============================== [2014-05-20 10:59:32] ID : TEMP (0xa) [2014-05-20 10:59:32] ATTR : RO (0x2) [2014-05-20 10:59:32] FIRST_BLK : 1994 [2014-05-20 10:59:32] NO_BLKS : 8 [2014-05-20 10:59:32] =============================== [2014-05-20 10:59:32] j4fs_open success .. [2014-05-20 10:59:32] load_lfs_parameters valid magic code and version [2014-05-20 10:59:32] microusb get device return value : 0 [2014-05-20 10:59:32] [LOKE BAT] voltage: 3802 [2014-05-20 10:59:32] [LOKE BAT] low battery check! adc: 3812 / ta_state: 0 [2014-05-20 10:59:32] [BOOT][KEY] Detected Key Value = 0x200 [2014-05-20 10:59:32] loke_charger_check- reset_type: 0, ffffffff [2014-05-20 10:59:32] LOKE2 (charger) : invalid charger [2014-05-20 10:59:32] [LOKE BAT] charger --> disable! [2014-05-20 10:59:32] LOKE2 (chager) exit [2014-05-20 10:59:32] LOKE2 movinand flag is zero. [2014-05-20 10:59:32] INF_REG1: 11223344 / INF_REG2: 0 [2014-05-20 10:59:32] SECURE BOOT WAS DISABLED by kconfig .. [2014-05-20 10:59:32] [2014-05-20 10:59:32] Autoboot (0 seconds) in progress, press any key to stop [2014-05-20 10:59:32] ........................................done [2014-05-20 10:59:33] Kernel read success from kernel partition [2014-05-20 10:59:33] microusb get device return value : 0 [2014-05-20 10:59:33] j4fs_read_file_bootloader 331: Warning(ret,len)=(8,1024) [2014-05-20 10:59:33] [2014-05-20 10:59:33] Starting kernel at 0x50800000... [2014-05-20 10:59:33] [2014-05-20 10:59:33] set usbpath to MODEM.. [2014-05-20 10:59:33] Uncompressing Linux................. done, booting the kernel. [2014-05-20 10:59:34] Linux version 2.6.28.6 (root@becks) (gcc version 4.2.2) #1 Tue Feb 2 18:42:56 KST 2010 [2014-05-20 10:59:34] CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5307f [2014-05-20 10:59:34] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [2014-05-20 10:59:34] Machine: VOLANS [2014-05-20 10:59:34] [early_uart_usb_path] usbsel=0, uartsel=1 [2014-05-20 10:59:34] boot_mode:0 [2014-05-20 10:59:34] factory_cable:0 [2014-05-20 10:59:34] Memory policy: ECC disabled, Data cache writeback [2014-05-20 10:59:34] CPU S3C6410 (id 0x36410101) [2014-05-20 10:59:34] S3C24XX Clocks, (c) 2004 Simtec Electronics [2014-05-20 10:59:34] S3C64XX: PLL settings, A=800000000, M=133000000, E=24000000 [2014-05-20 10:59:34] S3C64XX: HCLKx2=266666666, HCLK=133333333, PCLK=66666666 [2014-05-20 10:59:34] mout_apll: source is fout_apll (1), rate is 800000000 [2014-05-20 10:59:34] mout_epll: source is fout_epll (1), rate is 24000000 [2014-05-20 10:59:34] mout_mpll: source is mpll (1), rate is 133000000 [2014-05-20 10:59:34] mmc_bus: source is dout_mpll (1), rate is 22166666 [2014-05-20 10:59:34] mmc_bus: source is dout_mpll (1), rate is 22166666 [2014-05-20 10:59:34] mmc_bus: source is mout_epll (0), rate is 24000000 [2014-05-20 10:59:34] usb-host-bus: source is mout_epll (0), rate is 24000000 [2014-05-20 10:59:34] uclk1: source is dout_mpll (1), rate is 133000000 [2014-05-20 10:59:34] spi_epll: source is mout_epll (0), rate is 24000000 [2014-05-20 10:59:34] spi_epll: source is mout_epll (0), rate is 24000000 [2014-05-20 10:59:34] audio-bus0: source is mout_epll (0), rate is 24000000 [2014-05-20 10:59:34] audio-bus1: source is mout_epll (0), rate is 24000000 [2014-05-20 10:59:34] audio-bus2: source is mout_epll (0), rate is 24000000 [2014-05-20 10:59:34] irda-bus: source is mout_epll (0), rate is 24000000 [2014-05-20 10:59:34] s3c64xx: 4120576 bytes SDRAM reserved for rp at 0x50689000 [2014-05-20 10:59:34] s3c64xx: 19922944 bytes SDRAM reserved for g3d at 0x50a77000 [2014-05-20 10:59:34] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 52578 [2014-05-20 10:59:34] Kernel command line: root=139:7 rootfstype=cramfs console=ttySAC2,115200 version=Sbl(1.0.0) 2010-02-02 18:49:01 switch_sel=2 lcd_level=6 boot_mode=0 factory_cable=0 [2014-05-20 10:59:34] PID hash table entries: 1024 (order: 10, 4096 bytes) [2014-05-20 10:59:34] Console: colour dummy device 80x30 [2014-05-20 10:59:34] console [ttySAC2] enabled [2014-05-20 10:59:34] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [2014-05-20 10:59:34] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [2014-05-20 10:59:34] Memory: 207MB = 207MB total [2014-05-20 10:59:34] Memory: 181376KB available (4296K code, 530K data, 124K init) [2014-05-20 10:59:34] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [2014-05-20 10:59:34] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688) [2014-05-20 10:59:34] Security Framework initialized [2014-05-20 10:59:34] Mount-cache hash table entries: 512 [2014-05-20 10:59:34] CPU: Testing write buffer coherency: ok [2014-05-20 10:59:34] net_namespace: 316 bytes [2014-05-20 10:59:34] NET: Registered protocol family 16 [2014-05-20 10:59:34] S3C6410 Power Management, (c) 2008 Samsung Electronics [2014-05-20 10:59:34] S3C6410: Initialising architecture [2014-05-20 10:59:34] S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics [2014-05-20 10:59:34] Total 32 DMA channels will be initialized. [2014-05-20 10:59:34] usbcore: registered new interface driver usbfs [2014-05-20 10:59:34] usbcore: registered new interface driver hub [2014-05-20 10:59:34] usbcore: registered new device driver usb [2014-05-20 10:59:34] Bluetooth: Core ver 2.13 [2014-05-20 10:59:34] NET: Registered protocol family 31 [2014-05-20 10:59:34] Bluetooth: HCI device and connection manager initialized [2014-05-20 10:59:34] Bluetooth: HCI socket layer initialized [2014-05-20 10:59:34] NET: Registered protocol family 2 [2014-05-20 10:59:34] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [2014-05-20 10:59:34] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [2014-05-20 10:59:34] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [2014-05-20 10:59:34] TCP: Hash tables configured (established 8192 bind 8192) [2014-05-20 10:59:34] TCP reno registered [2014-05-20 10:59:34] NET: Registered protocol family 1 [2014-05-20 10:59:34] S3C64XX ADC driver, (c) 2008 Samsung Electronics [2014-05-20 10:59:34] S3C64XX ADC driver successfully probed [2014-05-20 10:59:34] S3C PWM Driver, (c) 2006-2007 Samsung Electronics [2014-05-20 10:59:34] NetWinder Floating Point Emulator V0.97 (double precision) [2014-05-20 10:59:34] audit: initializing netlink socket (disabled) [2014-05-20 10:59:34] type=2000 audit(0.375:1): initialized [2014-05-20 10:59:34] msgmni has been set to 354 [2014-05-20 10:59:34] io scheduler noop registered [2014-05-20 10:59:34] io scheduler anticipatory registered [2014-05-20 10:59:34] io scheduler deadline registered [2014-05-20 10:59:34] io scheduler cfq registered (default) [2014-05-20 10:59:34] i2c /dev entries driver [2014-05-20 10:59:34] i2c-gpio i2c-gpio.2: using pins 36 (SDA) and 35 (SCL, no clock stretching) [2014-05-20 10:59:34] i2c-gpio i2c-gpio.3: using pins 138 (SDA) and 137 (SCL, no clock stretching) [2014-05-20 10:59:34] i2c-gpio i2c-gpio.4: using pins 22 (SDA) and 21 (SCL) [2014-05-20 10:59:35] s3c2440-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter [2014-05-20 10:59:35] s3c2440-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter [2014-05-20 10:59:35] at24 1-0057: 16384 byte 24c128 EEPROM (writable) [2014-05-20 10:59:35] PMIC Initial Regulation! [2014-05-20 10:59:35] MAX8698 PMIC Driver Loading! hobac(c). [2014-05-20 10:59:35] MAX17040 Fuel Gauge Version 02. [2014-05-20 10:59:35] MAX17040 Fuel Gauge Driver Loading! hobac(c). [2014-05-20 10:59:35] [LCD] s6d04d1x21_init() !!! [2014-05-20 10:59:35] [BL] aat1231_1_init() [2014-05-20 10:59:35] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [2014-05-20 10:59:35] s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10 [2014-05-20 10:59:35] s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10 [2014-05-20 10:59:35] s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10 [2014-05-20 10:59:35] brd: module loaded [2014-05-20 10:59:35] loop: module loaded [2014-05-20 10:59:35] PPP generic driver version 2.4.2 [2014-05-20 10:59:35] Linux video capture interface: v2.00 [2014-05-20 10:59:35] parent clock for camera: 266.666 MHz, divisor: 11 [2014-05-20 10:59:35] throughc : noon attached successfully!!! [2014-05-20 10:59:35] parent clock for camera: 266.666 MHz, divisor: 11 [2014-05-20 10:59:35] [CAM] s5k4ba attached successfully! [2014-05-20 10:59:35] [CAM] FPS_TEST2 [2014-05-20 10:59:35] S3C6400 MFC Driver, (c) 2007 Samsung Electronics [2014-05-20 10:59:35] address of segment_info=c16d9000, address of commit_info =c16e2c40 [2014-05-20 10:59:35] S3C6400 MFC Driver, (c) 2007 Samsung Electronics [2014-05-20 10:59:35] S3C JPEG Driver, (c) 2007 Samsung Electronics [2014-05-20 10:59:35] S3C CMM Driver, (c) 2008 Samsung Electronics [2014-05-20 10:59:35] no memory for cmm [2014-05-20 10:59:35] S3C Renderer pipeline Driver, (c) 2009 Samsung Electronics [2014-05-20 10:59:35] s3c_rp_probe called [2014-05-20 10:59:35] s3c_rp_probe successfully [2014-05-20 10:59:35] [ONLD] =============== OCLD local mode =============== [2014-05-20 10:59:35] [ONLD] LLD VERSION : OCLD_v1.0.0_XSR1.5.2p4_Linux_090427 [2014-05-20 10:59:35] [ONLD] OND_TRANS_MODE = 0x2 with CacheRead [2014-05-20 10:59:35] [ONLD] Enable ONENANDCON_READ_FULL_SECTOR [2014-05-20 10:59:35] [ONLD] Disable ONENANDCON_WRITE_FULL_SECTOR [2014-05-20 10:59:35] [ONLD] Enable DEFERRED_CHK [2014-05-20 10:59:35] [ONLD] =============================================== [2014-05-20 10:59:35] TinyBML init registered [2014-05-20 10:59:35] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [2014-05-20 10:59:35] s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics [2014-05-20 10:59:35] s3c-udc : version 15 March 2009 (DMA Mode) [2014-05-20 10:59:35] mice: PS/2 mouse device common for all mice [2014-05-20 10:59:35] input: sec-keypad as /class/input/input0 [2014-05-20 10:59:35] sec-keypad Initialized [2014-05-20 10:59:35] S3C Keypad Driver [2014-05-20 10:59:35] [TSP] synaptics touchscreen probe - start [2014-05-20 10:59:36] input: touchscreen as /class/input/input1 [2014-05-20 10:59:36] [TSP] g_client->addr = 0x20 [2014-05-20 10:59:36] [TSP] success touchscreen_probe() ! [2014-05-20 10:59:36] S3C24XX RTC, (c) 2004,2006 Simtec Electronics [2014-05-20 10:59:36] s3c2410_rtc: tick irq 34, alarm irq 92 [2014-05-20 10:59:36] s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling [2014-05-20 10:59:36] s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 [2014-05-20 10:59:36] Volans Battery Driver Loading! hobac(c). [2014-05-20 10:59:36] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics [2014-05-20 10:59:36] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled [2014-05-20 10:59:36] Bluetooth: Virtual HCI driver ver 1.2 [2014-05-20 10:59:36] Bluetooth: HCI UART driver ver 2.2 [2014-05-20 10:59:36] Bluetooth: HCI H4 protocol initialized [2014-05-20 10:59:36] sdhci: Secure Digital Host Controller Interface driver [2014-05-20 10:59:36] sdhci: Copyright(c) Pierre Ossman [2014-05-20 10:59:36] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133333333 Hz) [2014-05-20 10:59:36] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133333333 Hz) [2014-05-20 10:59:36] s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (22166666 Hz) [2014-05-20 10:59:36] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA [2014-05-20 10:59:36] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz) [2014-05-20 10:59:36] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz) [2014-05-20 10:59:36] s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (22166666 Hz) [2014-05-20 10:59:36] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA [2014-05-20 10:59:36] usbcore: registered new interface driver usbhid [2014-05-20 10:59:36] usbhid: v2.6:USB HID core driver [2014-05-20 10:59:36] Advanced Linux Sound Architecture Driver Version 1.0.18rc3. [2014-05-20 10:59:36] ASoC version 0.13.2 [2014-05-20 10:59:36] [EARPHONE] found EARJACK adapter at irq 111 [2014-05-20 10:59:36] amp module I2C id: 3 [2014-05-20 10:59:36] mmc1: new high speed MMC card at address 0001 [2014-05-20 10:59:36] mmca: mmc1:0001 AFG00A 980 MiB [2014-05-20 10:59:36] mmca: mmca1 mmca2 mmca3 [2014-05-20 10:59:36] playback: 1, capture : 1 [2014-05-20 10:59:36] asoc: AK4671 <-> s3c6410-i2s mapping ok [2014-05-20 10:59:36] ALSA device list: [2014-05-20 10:59:36] #0: smdk6410 (AK4671) [2014-05-20 10:59:36] TCP cubic registered [2014-05-20 10:59:36] NET: Registered protocol family 17 [2014-05-20 10:59:36] Bluetooth: L2CAP ver 2.11 [2014-05-20 10:59:36] Bluetooth: L2CAP socket layer initialized [2014-05-20 10:59:36] Bluetooth: SCO (Voice Link) ver 0.6 [2014-05-20 10:59:36] Bluetooth: SCO socket layer initialized [2014-05-20 10:59:36] Bluetooth: RFCOMM socket layer initialized [2014-05-20 10:59:36] Bluetooth: RFCOMM TTY layer initialized [2014-05-20 10:59:36] Bluetooth: RFCOMM ver 1.10 [2014-05-20 10:59:36] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [2014-05-20 10:59:36] Bluetooth: BNEP filters: protocol multicast [2014-05-20 10:59:36] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [2014-05-20 10:59:36] RPC: Registered udp transport module. [2014-05-20 10:59:36] RPC: Registered tcp transport module. [2014-05-20 10:59:36] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 [2014-05-20 10:59:36] s3c2410-rtc s3c2410-rtc: setting system clock to 2014-05-20 08:52:11 UTC (1400575931) [2014-05-20 10:59:36] VFS: Mounted root (cramfs filesystem) readonly. [2014-05-20 10:59:36] Freeing init memory: 124K [2014-05-20 10:59:36] init started: BusyBox v1.11.0 (2010-02-02 17:53:41 KST) [2014-05-20 10:59:36] starting pid 1063, tty '': '/etc/rc.d/rc.sysinit' [2014-05-20 10:59:37] !@1_rc.sysinit [2014-05-20 10:59:37] volans_battery_update_status- status: 2 / mV: 3680 / T: 26(238) / capacity: 37 / full counter: 0 / cable type: 0 / elapsed: 0 [2014-05-20 10:59:39] xsr: module license 'Samsung Proprietary' taints kernel. [2014-05-20 10:59:39] [BBM: ] << DevNO:0 MAPPING INFORMATION >> [2014-05-20 10:59:39] [BBM: ] Bad Mark Information [2014-05-20 10:59:39] [BBM: ] - Bad Mark (0x22) by write error [2014-05-20 10:59:39] [BBM: ] - Bad Mark (0x11) by erase error [2014-05-20 10:59:39] [BBM: ] pstDev->n1stSbnOfULArea = 0 [2014-05-20 10:59:39] [BBM: ] 000: Sbn[1216] ==> Rbn[2006] / UnLocked / BadMark:0x00 [2014-05-20 10:59:39] [BBM: ] << Total : 1 BAD-MAPPING INFORMATION >> [2014-05-20 10:59:39] XSR: Registered BML Driver. [2014-05-20 10:59:39] [BIF:WRN] BML_Init is already called [2014-05-20 10:59:39] [BBM: ] << DevNO:0 MAPPING INFORMATION >> [2014-05-20 10:59:39] [BBM: ] Bad Mark Information [2014-05-20 10:59:39] [BBM: ] - Bad Mark (0x22) by write error [2014-05-20 10:59:39] [BBM: ] - Bad Mark (0x11) by erase error [2014-05-20 10:59:39] [BBM: ] pstDev->n1stSbnOfULArea = 0 [2014-05-20 10:59:40] [BBM: ] 000: Sbn[1216] ==> Rbn[2006] / UnLocked / BadMark:0x00 [2014-05-20 10:59:40] [BBM: ] << Total : 1 BAD-MAPPING INFORMATION >> [2014-05-20 10:59:40] XSR: Registered STL Driver. [2014-05-20 10:59:40] yaffs Feb 2 2010 18:37:55 Installing. [2014-05-20 10:59:40] load_parameter_value: no param info [2014-05-20 10:59:40] dcm_parameter_init: relocated default param [2014-05-20 10:59:40] register_cluster_usage_notify[303]: volume usage notify callback function registering from(00000000) to(bf08c8f0) [2014-05-20 10:59:41] [ONEDRAM] Register MODEM_RAM_DUMP_DEVICE .. ..Success .. [2014-05-20 10:59:41] [ONEDRAM] init_hw_setting filter value : 0 [2014-05-20 10:59:41] [ONEDRAM] init_hw_setting filter value : 80000000 [2014-05-20 10:59:41] $Id: dpram.c, v0.01 2009/05/03 08:00:00 $ [2014-05-20 10:59:41] [MULTIPDP] pdp_activate() id: 1 [2014-05-20 10:59:41] pdp_activate(): ttyCSD(id: 1) serial device is created. [2014-05-20 10:59:41] [MULTIPDP] pdp_activate() id: 8 [2014-05-20 10:59:41] pdp_activate(): ttyRFS(id: 8) serial device is created. [2014-05-20 10:59:41] [MULTIPDP] pdp_activate() id: 25 [2014-05-20 10:59:41] pdp_activate(): ttyROUTER(id: 25) serial device is created. [2014-05-20 10:59:41] [MULTIPDP] pdp_activate() id: 5 [2014-05-20 10:59:41] pdp_activate(): ttyGPS(id: 5) serial device is created. [2014-05-20 10:59:41] [MULTIPDP] pdp_activate() id: 6 [2014-05-20 10:59:41] pdp_activate(): ttyXtraGPS(id: 6) serial device is created. [2014-05-20 10:59:41] volans_usb_ic_probe() called [2014-05-20 10:59:41] fsa9480_probe called .. [2014-05-20 10:59:41] [MICROUSBIC] init_hw_setting filter value : 8000 [2014-05-20 10:59:41] [USB IC] workqueue start .. [2014-05-20 10:59:41] [USB IC] INTB value : 1 [2014-05-20 10:59:41] S3C G3D Driver, (c) 2007-2009 Samsung Electronics, 2009.09.08 [2014-05-20 10:59:41] s3c_g3d version : 0x1050000 [2014-05-20 10:59:41] G3D_RESERVED_MEM_SIZE : 18 MB [2014-05-20 10:59:41] G3D_CHUNK_SIZE : 2 MB [2014-05-20 10:59:41] G3D_CHUNK_NUM : 9 [2014-05-20 10:59:41] 0 th virt_addr = 0xc1b77000, phy_addr = 0x51b77000 [2014-05-20 10:59:41] 1 th virt_addr = 0xc1977000, phy_addr = 0x51977000 [2014-05-20 10:59:41] 2 th virt_addr = 0xc1777000, phy_addr = 0x51777000 [2014-05-20 10:59:41] 3 th virt_addr = 0xc1577000, phy_addr = 0x51577000 [2014-05-20 10:59:41] 4 th virt_addr = 0xc1377000, phy_addr = 0x51377000 [2014-05-20 10:59:41] 5 th virt_addr = 0xc1177000, phy_addr = 0x51177000 [2014-05-20 10:59:41] 6 th virt_addr = 0xc0f77000, phy_addr = 0x50f77000 [2014-05-20 10:59:41] 7 th virt_addr = 0xc0d77000, phy_addr = 0x50d77000 [2014-05-20 10:59:41] 8 th virt_addr = 0xc0b77000, phy_addr = 0x50b77000 [2014-05-20 10:59:41] rb_dump_init done [2014-05-20 10:59:41] [TSP] touch firmware auto update [2014-05-20 10:59:41] [TSP] current firmware S/W revision info = 23 [2014-05-20 10:59:41] [TSP] No excution touch firmware update. [2014-05-20 10:59:41] [TSP] already installed latest touch firmware : 23 [2014-05-20 10:59:41] [TSP] sysfs_issp_store() firmware update success !! [2014-05-20 10:59:41] [BBM: ] << DevNO:0 MAPPING INFORMATION >> [2014-05-20 10:59:41] [BBM: ] Bad Mark Information [2014-05-20 10:59:41] [BBM: ] - Bad Mark (0x22) by write error [2014-05-20 10:59:41] [BBM: ] - Bad Mark (0x11) by erase error [2014-05-20 10:59:41] [BBM: ] pstDev->n1stSbnOfULArea = 0 [2014-05-20 10:59:41] [BBM: ] 000: Sbn[1216] ==> Rbn[2006] / UnLocked / BadMark:0x00 [2014-05-20 10:59:41] [BBM: ] << Total : 1 BAD-MAPPING INFORMATION >> [2014-05-20 10:59:41] yaffs: dev is 143654914 name is "bml2" [2014-05-20 10:59:41] yaffs: passed flags "" [2014-05-20 10:59:41] yaffs: Attempting MTD mount on 137.2, "bml2" [2014-05-20 10:59:41] yaffs: restored from checkpoint [2014-05-20 10:59:41] yaffs_read_super: isCheckpointed 1 [2014-05-20 10:59:42] __log_replay[1139]: RFS_SUBLOG_COMMIT (0,8a:09) [2014-05-20 10:59:42] rfs_fill_super[200]: RFS successfully mounted [8a:09] [2014-05-20 10:59:42] open: No such file or directory [2014-05-20 10:59:42] __log_replay[1139]: RFS_SUBLOG_COMMIT (0,b3:01) [2014-05-20 10:59:42] rfs_fill_super[200]: RFS successfully mounted [b3:01] [2014-05-20 10:59:42] __log_replay[1139]: RFS_SUBLOG_COMMIT (0,b3:02) [2014-05-20 10:59:42] rfs_fill_super[200]: RFS successfully mounted [b3:02] [2014-05-20 10:59:42] __log_replay[1139]: RFS_SUBLOG_COMMIT (0,b3:03) [2014-05-20 10:59:42] rfs_fill_super[200]: RFS successfully mounted [b3:03] [2014-05-20 10:59:42] stat mmcb: No such file or directory [2014-05-20 10:59:42] SDMicro card is not detected. [2014-05-20 10:59:42] <dcm_notify_quota_info:371> real_time_quota_status : 0x00000010 [2014-05-20 10:59:42] Starting internet superserver: inetd. [2014-05-20 10:59:42] starting pid 1207, tty '': '/etc/rc.d/rc.local' [2014-05-20 10:59:43] Already initialized. [2014-05-20 10:59:43] [Debug Message Service Daemon] Start debug message service [2014-05-20 10:59:43] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message-default-viewer.c:1285: _debug_message_parse_conffile : fail to open file : No such file or directory [2014-05-20 10:59:43] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message-viewer-filter.c:358: insert success all_app_vlist_table module_id 0x4e000000 viewer_id 0 [2014-05-20 10:59:43] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message-viewer-filter.c:369: insert success all_app_vlist_table module_id 0x9000000 viewer_id 0 [2014-05-20 10:59:43] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message-default-viewer.c:1738: Can't open /opt/etc/debug-message-color.conf [2014-05-20 10:59:43] Trying to load /usr/lib/libnoti_svc.so [2014-05-20 10:59:44] ->CreateInstance [2014-05-20 10:59:44] notification library for dbus-daemon (Revision: exported) [2014-05-20 10:59:44] "/usr/lib/libnoti_svc.so" is loaded. [2014-05-20 10:59:44] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1236, app id = 25000 [2014-05-20 10:59:46] Already initialized. [2014-05-20 10:59:46] <dcm_notify_quota_info:371> real_time_quota_status : 0x00000011 [2014-05-20 10:59:46] [2014-05-20 10:59:46] MobileDBS Ver 4.7.0 patch 39 (32 bit) [2014-05-20 10:59:46] Copyright (C) 2003-2010 INERVIT Co., Ltd. All rights reserved. [2014-05-20 10:59:46] [2014-05-20 10:59:50] ##### MobileDBS Up and Running [inappdb] database ##### [2014-05-20 10:59:50] [2014-05-20 10:59:50] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1252, app id = 30300 [2014-05-20 10:59:50] [2014-05-20 10:59:51] starting pid 1275, tty '/dev/ttySAC2': '/sbin/getty -L ttySAC2 115200 vt100' [2014-05-20 10:59:51] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1253, app id = 30200 [2014-05-20 10:59:52] [tinyx] s3c6410Initialize : fb0 clear [2014-05-20 10:59:52] S3CFB_WIN_POSITION [2014-05-20 10:59:52] INIT SIGUSR1 [2014-05-20 10:59:52] (EE) XKB: Rules returned no components [2014-05-20 10:59:52] (EE) XKB: No components provided for device Virtual core keyboard [2014-05-20 10:59:52] Set key. EVIOCSKEYCODE error! [2014-05-20 10:59:52] : Invalid argument [2014-05-20 10:59:52] [2014-05-20 10:59:52] [2014-05-20 10:59:52] [2014-05-20 10:59:52] Welcome to volans [2014-05-20 10:59:52] volans login: [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:370: pid=1253 called debug_message_deinit [2014-05-20 10:59:54] === sapwood-server ==== [2014-05-20 10:59:54] mv: cannot rename '/opt/share/dbus-1/services/org.projectx.telephony.service.bk': No such file or directory [2014-05-20 10:59:54] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1287, app id = 30100 [2014-05-20 10:59:55] Starting app-server [2014-05-20 10:59:55] EGL: X11 window manager is registered [2014-05-20 10:59:55] EGL: Framebuffer window manager is registered [2014-05-20 10:59:55] [XM] __xemer_conf_file_check logger_enable:false [2014-05-20 10:59:55] [XM] __xemer_conf_file_check effect_enable:true [2014-05-20 10:59:55] EGL: Framebuffer window manager was forcibly initializedMMAP_ALLOC : virt addr = 0x00000000, phys addr = 0x51b77000, size = 2097152 [2014-05-20 10:59:55] [2014-05-20 10:59:55] 3dm_alloc [ 1288 F F F F F F F F ] Alloc= 1 Free= 8 [2014-05-20 10:59:55] [2014-05-20 10:59:55] [XECO] xeco_egl_initialize(192) success: eglGetDisplay(), egl->dpy:0x1 [2014-05-20 10:59:55] [XECO] xeco_egl_initialize(196) success: eglInitialize() [2014-05-20 10:59:55] [XECO] xeco_egl_initialize(202) success: eglChooseConfig(), num:1, egl->cfg:0xd [2014-05-20 10:59:55] [2014-05-20 10:59:55] [Chunk Allocator] 1 blocks (block size:0x200000) [2014-05-20 10:59:55] [2014-05-20 10:59:55] =======Chunk::PrintChunkBlckInfo====== [2014-05-20 10:59:55] [2014-05-20 10:59:55] ------------------------------------------------------ [2014-05-20 10:59:55] [0] use flag: 1, start: 0, size: 2097152, next: 0x0 [2014-05-20 10:59:55] ------------------------------------------------------ [2014-05-20 10:59:55] Total Texture Size 0 Byte 0 KB Total Texture Count 0 [2014-05-20 10:59:55] [2014-05-20 10:59:55] ------------------------------------------------------ [2014-05-20 10:59:55] [XECO] xeco_egl_initialize(219) success: eglCreateWindowSurface(), egl->surface:0x3c6a8 [2014-05-20 10:59:55] libgles20.so was loaded successfully and GLES 2.0 API was mapped [2014-05-20 10:59:55] [XECO] xeco_egl_initialize(233) success: eglCreateContext(), egl->ctx:0x447a0 [2014-05-20 10:59:55] [XECO] xeco_egl_initialize(238) success: eglMakeCurrent() [2014-05-20 10:59:55] ** INFO: server started [2014-05-20 10:59:56] gdk_window_add_filter - __gdk_default_leader_window_ev_filter [2014-05-20 10:59:56] (metacity:1289): metacity-DEBUG: Starting clipboard manager [2014-05-20 10:59:56] /usr/share/themes/black/gtk-2.0/gtkrc:1453: Background image options specified without filename [2014-05-20 10:59:56] /usr/share/themes/black/gtk-2.0/gtkrc:1464: Background image options specified without filename [2014-05-20 10:59:56] /usr/share/themes/black/gtk-2.0/gtkrc:1897: file 10_commandbar.png previously referenced with different border or stretch values. Ignoring the new values. [2014-05-20 10:59:57] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1300, app id = 0 [2014-05-20 10:59:57] [2014-05-20 10:59:57] [SO-DAEMON]: Default print messages disabled.... [2014-05-20 11:00:07] volans_battery_update_status- status: 2 / mV: 3701 / T: 29(224) / capacity: 37 / full counter: 0 / cable type: 0 / elapsed: 0 [2014-05-20 11:00:11] [MULTIPDP] vs_open called. ttyRFS [2014-05-20 11:00:11] [DPRAM] dpram_phone_on:1013 - PHONE POWER ON! [2014-05-20 11:00:12] [IRQ] IRQ PHONE_ACTIVE level(0) [2014-05-20 11:00:12] PHONE ACTIVE : POWER OFF [2014-05-20 11:00:12] [PHONE ERROR] ->> 1 ModemOff [2014-05-20 11:00:16] - Phone Init OK. [2014-05-20 11:00:16] - Phone Init OK. [2014-05-20 11:00:17] [DPRAM] dpram_phone_image_load:974 - PHONE IMAGE LOAD START! [2014-05-20 11:00:17] - BML_LoadPIEntry OK. partitionID: 9 [2014-05-20 11:00:17] 0x 3, 0x 3, 0x 40, 0x 0 [2014-05-20 11:00:17] [DPRAM] dpram_nvdata_load:986 - NVDATA LOAD START! [2014-05-20 11:00:17] Print DGS Header : 7faaaf7e [2014-05-20 11:00:17] [DPRAM] dpram_phone_boot_start:1276 - DBL DOWNLOAD COMPLETE! [2014-05-20 11:00:17] [IRQ] IRQ PHONE_ACTIVE level(1) [2014-05-20 11:00:17] PHONE ACTIVE : RESET [2014-05-20 11:00:17] PHONE_POWER_ON_RESET .. [2014-05-20 11:00:17] [PHONE ERROR] ->> 4 Modem POR RESET [2014-05-20 11:00:17] +-------------------------------------+ [2014-05-20 11:00:17] | PHONE BOOTING COMPLETE | [2014-05-20 11:00:17] +-------------------------------------+ [2014-05-20 11:00:17] - MailboxAB: 0xabcdabcd [2014-05-20 11:00:18] [DPRAM] cmd_phone_start_handler:1847 - 0xc8 command execute! [2014-05-20 11:00:18] [DPRAM] dpram_init_and_report:940 - Initialized! [2014-05-20 11:00:20] save exit: isCheckpointed 1 [2014-05-20 11:00:20] [MULTIPDP] tx_stop. [2014-05-20 11:00:21] Unknown HZ value! (93) Assume 100. [2014-05-20 11:00:24] root 1324 1305 76 09:52 ? 00:00:01 launcher_indicator [2014-05-20 11:00:25] set_dvfs_vdd_arm_level- level: 1. [2014-05-20 11:00:25] save exit: isCheckpointed 1 [2014-05-20 11:00:36] [2014-05-20 11:00:36] Java domain: [Java logs are DISABLED] [2014-05-20 11:00:36] [2014-05-20 11:00:37] volans_battery_update_status- status: 2 / mV: 3655 / T: 30(216) / capacity: 37 / full counter: 0 / cable type: 0 / elapsed: 0 [2014-05-20 11:00:38] MMAP_ALLOC : virt addr = 0x00000000, phys addr = 0x51977000, size = 2097152 [2014-05-20 11:00:38] [2014-05-20 11:00:38] 3dm_alloc [ 1288 1311 F F F F F F F ] Alloc= 2 Free= 7 [2014-05-20 11:00:46] nosleep: no process killed [2014-05-20 11:00:53] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1371, app id = 30002 [2014-05-20 11:00:53] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1372, app id = 30002 [2014-05-20 11:00:56] Already .bd_addr exists [2014-05-20 11:00:56] Reached startAppsFg.sh [2014-05-20 11:00:57] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1376, app id = 30002 [2014-05-20 11:00:57] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1381, app id = 30002 [2014-05-20 11:01:07] volans_battery_update_status- status: 2 / mV: 3845 / T: 31(210) / capacity: 36 / full counter: 0 / cable type: 0 / elapsed: 0 [2014-05-20 11:01:13] [2014-05-20 11:01:13] [2014-05-20 11:01:13] [2014-05-20 11:01:13] [2014-05-20 11:01:13] Welcome to volans [2014-05-20 11:01:13] volans login: [2014-05-20 11:01:14] [2014-05-20 11:01:14] [2014-05-20 11:01:14] [2014-05-20 11:01:14] Welcome to volans [2014-05-20 11:01:14] volans login: root 1349 1321 0 09:53 ? 00:00:00 [scim] [2014-05-20 11:01:20] root 1350 1349 1 09:53 ? 00:00:00 /usr/lib/scim-1.0/scim-launcher -c simple -e xt9,now -f socket [2014-05-20 11:01:20] root 1351 1321 7 09:53 ? 00:00:03 [scim-panel-gtk] [2014-05-20 11:01:20] root 1355 1350 8 09:53 ? 00:00:04 /usr/lib/scim-1.0/scim-helper-launcher --daemon --config socket --display :0.0 now 371166E0-771C-45af-9563-7B2860C2DC36 [2014-05-20 11:01:20] scim already started... [2014-05-20 11:01:21] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1414, app id = 30002 [2014-05-20 11:01:21] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1416, app id = 30002 [2014-05-20 11:01:26] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1421, app id = 30002 [2014-05-20 11:01:27] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1423, app id = 30002 [2014-05-20 11:01:27] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1427, app id = 30002 [2014-05-20 11:01:28] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1433, app id = 30002 [2014-05-20 11:01:28] [dmf]/home/root/prod//middleware/application-framework/debug-message-service/./debug-message.c:348: _debug_message_init : pid=1438, app id = 30002 [2014-05-20 11:01:29] [X_EVDEV] EvdevKbdRead.... RESET Ptr [2014-05-20 11:01:29] [STATUS=KEY_LOCKUI_STATUS] [2014-05-20 11:01:30] [STATUS=KEY_LOCK_STATUS(g_GrabbedKeycode:0)] [2014-05-20 11:01:30] [xEvent][Func:s3c6410DPMS] Before call udevmgr_set_lcd_backlight(0) [2014-05-20 11:01:30] [DCM] lcd power off! [2014-05-20 11:01:30] [TSP] g_client->addr = 0x20 [2014-05-20 11:01:30] [xEvent][Func:s3c6410DPMS] After call udevmgr_set_lcd_backlight(0) [2014-05-20 11:01:30] Available Count 8 [2014-05-20 11:01:30] [2014-05-20 11:01:30] 3dm_free [ 1288 F F F F F F F F ] Alloc= 1 Free= 8 [2014-05-20 11:01:35] set_dvfs_vdd_arm_level- level: 5. [2014-05-20 11:01:35] PM: Syncing filesystems ... done. [2014-05-20 11:01:35] Freezing user space processes ... (elapsed 0.02 seconds) done. [2014-05-20 11:01:35] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [2014-05-20 11:01:35] Suspending console(s) (use no_console_suspend to debug) [2014-05-20 11:01:39] [2014-05-20 11:01:44] ps [2014-05-20 11:01:51] s3c6410_i2s_suspend:723 [2014-05-20 11:01:51] bt suspend!!! [2014-05-20 11:01:51] [RP][WARNING] : s3c_rp_suspend.. already suspend state [2014-05-20 11:01:51] WAKEUP_STAT: 0x00000010 / EINT0PEND: 0x00000000 / Wakeup Source: Keypad! [2014-05-20 11:01:51] s3c2410-wdt: watchdog disabled [2014-05-20 11:01:51] [RP][WARNING] : s3c_rp_resume.. [2014-05-20 11:01:51] volans_usb_ic_resume called [2014-05-20 11:01:51] [USB IC] workqueue start .. [2014-05-20 11:01:51] [USB IC] INTB value : 1 [2014-05-20 11:01:51] soc-audio soc-audio.0: scheduling resume work [2014-05-20 11:01:51] soc-audio soc-audio.0: starting resume work [2014-05-20 11:01:51] s3c6410_i2s_resume:741 [2014-05-20 11:01:51] soc-audio soc-audio.0: resume work completed [2014-05-20 11:01:51] Restarting tasks ... ERROR : select error [2014-05-20 11:01:51] <6>volans_update_system_time- RTC: 1400576065 / System Time: 1400576065 [2014-05-20 11:01:51] done. [2014-05-20 11:01:51] set_dvfs_vdd_arm_level- level: 1. [2014-05-20 11:01:51] [xEvent][Func:s3c6410DPMS] Before call udevmgr_set_lcd_backlight([RP][WARNING] : s3c_rp_resume.. already resume state [2014-05-20 11:01:51] 6) [2014-05-20 11:01:51] [DCM] lcd power on! [2014-05-20 11:01:51] [TSP] g_client->addr = 0x20 [2014-05-20 11:01:51] [TSP] g_client->addr = 0x20 [2014-05-20 11:01:52] [xEvent][Func:s3c6410DPMS] After call udevmgr_set_lcd_backlight(6) [2014-05-20 11:01:52] volans_battery_update_status- status: 2 / mV: 3742 / T: 31(214) / capacity: 36 / full counter: 0 / cable type: 0 / elapsed: 0 [2014-05-20 11:01:53] [2014-05-20 11:01:53] [2014-05-20 11:01:53] [2014-05-20 11:01:53] [2014-05-20 11:01:53] Welcome to volans [2014-05-20 11:01:53] volans login: rroooott [2014-05-20 11:01:56] [2014-05-20 11:01:56] [2014-05-20 11:01:56] [2014-05-20 11:01:56] BusyBox v1.11.0 (2010-02-02 17:53:41 KST) built-in shell (ash) [2014-05-20 11:01:56] Enter 'help' for a list of built-in commands. [2014-05-20 11:01:56] [2014-05-20 11:01:56] # [2014-05-20 11:01:57] [2014-05-20 11:01:57] # ppss [2014-05-20 11:01:59] [2014-05-20 11:01:59] PID TTY TIME CMD [2014-05-20 11:01:59] 1275 ttySAC2 00:00:00 sh [2014-05-20 11:02:00] 1466 ttySAC2 00:00:00 ps [2014-05-20 11:02:00] # [X_EVDEV] EvdevKbdRead.... RESET Ptr [2014-05-20 11:02:00] [STATUS=KEY_LOCKUI_STATUS] [2014-05-20 11:02:00] [xEvent][Func:s3c6410DPMS] Before call udevmgr_set_lcd_backlight(0) [2014-05-20 11:02:00] [DCM] lcd power off! [2014-05-20 11:02:00] [TSP] g_client->addr = 0x20 [2014-05-20 11:02:00] [xEvent][Func:s3c6410DPMS] After call udevmgr_set_lcd_backlight(0) [2014-05-20 11:02:07] set_dvfs_vdd_arm_level- level: 5. [2014-05-20 11:02:07] PM: Syncing filesystems ... done. [2014-05-20 11:02:07] Freezing user space processes ... (elapsed 0.00 seconds) done. [2014-05-20 11:02:07] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [2014-05-20 11:02:07] Suspending console(s) (use no_console_suspend to debug) [2014-05-20 11:02:10] s3c6410_i2s_suspend:723 [2014-05-20 11:02:10] bt suspend!!! [2014-05-20 11:02:10] [RP][WARNING] : s3c_rp_suspend.. already suspend state [2014-05-20 11:02:10] Trying to free already-free IRQ 88 [2014-05-20 11:02:10] Trying to free already-free IRQ 107 [2014-05-20 11:02:10] WAKEUP_STAT: 0x00000010 / EINT0PEND: 0x00000000 / Wakeup Source: Keypad! [2014-05-20 11:02:10] s3c2410-wdt: watchdog disabled [2014-05-20 11:02:10] [RP][WARNING] : s3c_rp_resume.. [2014-05-20 11:02:10] volans_usb_ic_resume called [2014-05-20 11:02:10] [USB IC] workqueue start .. [2014-05-20 11:02:10] [USB IC] INTB value : 1 [2014-05-20 11:02:10] soc-audio soc-audio.0: scheduling resume work [2014-05-20 11:02:10] soc-audio soc-audio.0: starting resume work [2014-05-20 11:02:10] s3c6410_i2s_resume:741 [2014-05-20 11:02:10] soc-audio soc-audio.0: resume work completed [2014-05-20 11:02:10] Restarting tasks ... done. [2014-05-20 11:02:10] set_dvfs_vdd_arm_level- level: 1. [2014-05-20 11:02:10] volans_update_system_time- RTC: 1400576084 / System Time: 1400576084 [2014-05-20 11:02:10] [xEvent][Func:s3c6410DPMS] Before call udevmgr_set_lcd_backlight([RP][WARNING] : s3c_rp_resume.. already resume state [2014-05-20 11:02:10] 6) [2014-05-20 11:02:11] [DCM] lcd power on! [2014-05-20 11:02:11] [TSP] g_client->addr = 0x20 [2014-05-20 11:02:11] [TSP] g_client->addr = 0x20 [2014-05-20 11:02:11] [xEvent][Func:s3c6410DPMS] After call udevmgr_set_lcd_backlight(6) [2014-05-20 11:02:11] volans_battery_update_status- status: 2 / mV: 3822 / T: 30(216) / capacity: 37 / full counter: 0 / cable type: 0 / elapsed: 0 [2014-05-20 11:02:12] [STATUS=KEY_UNLOCK_STATUS] [2014-05-20 11:02:12] MMAP_ALLOC : virt addr = 0x00000000, phys addr = 0x51977000, size = 2097152 [2014-05-20 11:02:12] [2014-05-20 11:02:12] 3dm_alloc [ 1288 1311 F F F F F F F ] Alloc= 2 Free= 7 [2014-05-20 11:02:13] Available Count 8 [2014-05-20 11:02:13] [2014-05-20 11:02:13] 3dm_free [ 1288 F F F F F F F F ] Alloc= 1 Free= 8 [2014-05-20 11:02:13] [2014-05-20 11:02:13] # [2014-05-20 11:02:14] # ps [2014-05-20 11:02:16] PID TTY TIME CMD [2014-05-20 11:02:16] 1275 ttySAC2 00:00:00 sh [2014-05-20 11:02:16] 1475 ttySAC2 00:00:00 ps [2014-05-20 11:02:16] # cat /pr���# cat /proc/cpu�# cat /proc/cpuinf# cat /proc/cpuinfo [2014-05-20 11:02:27] Processor : ARMv6-compatible processor rev 6 (v6l) [2014-05-20 11:02:27] BogoMIPS : 16.45 [2014-05-20 11:02:27] Features : swp half thumb fastmult vfp edsp java [2014-05-20 11:02:27] CPU implementer : 0x41 [2014-05-20 11:02:27] CPU architecture: 7 [2014-05-20 11:02:27] CPU variant : 0x0 [2014-05-20 11:02:27] CPU part : 0xb76 [2014-05-20 11:02:27] CPU revision : 6 [2014-05-20 11:02:27] [2014-05-20 11:02:27] Hardware : VOLANS [2014-05-20 11:02:27] Revision : 0000 [2014-05-20 11:02:27] Serial : 0000000000000000 [2014-05-20 11:02:27] Board Revision : 96 [2014-05-20 11:02:27] # [2014-05-20 11:02:38] # ls /prvolans_battery_update_status- status: 2 / mV: 3868 / T: 30(217) / capacity: 37 / full counter: 0 / cable type: 0 / elapsed: 0 [2014-05-20 11:02:42] oc [2014-05-20 11:02:43] 1 1316 242 kpagecount [2014-05-20 11:02:43] 1027 1318 3 kpageflags [2014-05-20 11:02:43] 1028 1320 4 lfs [2014-05-20 11:02:43] 1034 1321 5 loadavg [2014-05-20 11:02:43] 1046 1324 6 locks [2014-05-20 11:02:43] 1050 1349 861 meminfo [2014-05-20 11:02:43] 1069 1350 925 misc [2014-05-20 11:02:43] 1149 1351 926 modules [2014-05-20 11:02:43] 1205 1353 973 mounts [2014-05-20 11:02:43] 1214 1354 976 movinand_workload [2014-05-20 11:02:43] 1215 1355 985 multipdp [2014-05-20 11:02:43] 1222 1360 991 nation [2014-05-20 11:02:43] 1235 1361 992 net [2014-05-20 11:02:43] 1236 1374 ak4671reg pagetypeinfo [2014-05-20 11:02:43] 1237 1375 alarm_boot partitions [2014-05-20 11:02:43] 1240 1384 apm rfs [2014-05-20 11:02:43] 1244 1392 asound rfs_fs [2014-05-20 11:02:43] 1256 1407 buddyinfo sched_debug [2014-05-20 11:02:43] 1257 141 bus self [2014-05-20 11:02:43] 1258 1415 cmdline slabinfo [2014-05-20 11:02:43] 1259 1420 cpu stat [2014-05-20 11:02:43] 1275 1422 cpuinfo swaps [2014-05-20 11:02:43] 1276 1426 devices sys [2014-05-20 11:02:43] 1277 1431 diskstats sysrq-trigger [2014-05-20 11:02:43] 1282 1437 driver sysvipc [2014-05-20 11:02:43] 1287 144 execdomains timer_list [2014-05-20 11:02:43] 1288 1440 factory_cable tinyrfs [2014-05-20 11:02:43] 1289 1477 fb tty [2014-05-20 11:02:43] 1292 150 filesystems uptime [2014-05-20 11:02:43] 1295 153 fs version [2014-05-20 11:02:43] 1301 158 iPrintFlag vmallocinfo [2014-05-20 11:02:43] 1302 163 interrupts vmstat [2014-05-20 11:02:43] 1305 186 iomem yaffs [2014-05-20 11:02:43] 1309 187 ioports zoneinfo [2014-05-20 11:02:43] 1311 188 irq [2014-05-20 11:02:43] 1314 2 kallsyms [2014-05-20 11:02:43] 1315 233 kmsg [2014-05-20 11:02:43] # [X_EVDEV] EvdevKbdRead.... RESET Ptr [2014-05-20 11:02:47] [STATUS=KEY_LOCKUI_STATUS] [2014-05-20 11:02:48] [xEvent][Func:s3c6410DPMS] Before call udevmgr_set_lcd_backlight(0) [2014-05-20 11:02:48] [DCM] lcd power off! [2014-05-20 11:02:48] [TSP] g_client->addr = 0x20 [2014-05-20 11:02:48] [STATUS=KEY_LOCK_STATUS(g_GrabbedKeycode:0)] [2014-05-20 11:02:48] [xEvent][Func:s3c6410DPMS] After call udevmgr_set_lcd_backlight(0) [2014-05-20 11:02:53] set_dvfs_vdd_arm_level- level: 5. [2014-05-20 11:02:53] PM: Syncing filesystems ... done. [2014-05-20 11:02:53] Freezing user space processes ... (elapsed 0.01 seconds) done. [2014-05-20 11:02:53] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [2014-05-20 11:02:53] Suspending console(s) (use no_console_suspend to debug) [2014-05-20 11:03:08] s3c6410_i2s_suspend:723 [2014-05-20 11:03:08] bt suspend!!! [2014-05-20 11:03:08] [RP][WARNING] : s3c_rp_suspend.. already suspend state [2014-05-20 11:03:08] Trying to free already-free IRQ 88 [2014-05-20 11:03:08] Trying to free already-free IRQ 107 [2014-05-20 11:03:08] WAKEUP_STAT: 0x00000001 / EINT0PEND: 0x00000020 / Wakeup Source: Power Key! [2014-05-20 11:03:08] s3c2410-wdt: watchdog disabled [2014-05-20 11:03:08] [RP][WARNING] : s3c_rp_resume.. [2014-05-20 11:03:08] volans_usb_ic_resume called [2014-05-20 11:03:08] [USB IC] workqueue start .. [2014-05-20 11:03:08] [USB IC] INTB value : 1 [2014-05-20 11:03:08] soc-audio soc-audio.0: scheduling resume work [2014-05-20 11:03:08] soc-audio soc-audio.0: starting resume work [2014-05-20 11:03:08] s3c6410_i2s_resume:741 [2014-05-20 11:03:08] soc-audio soc-audio.0: resume work completed [2014-05-20 11:03:08] Restarting tasks ... done. [2014-05-20 11:03:08] set_dvfs_vdd_arm_level- level: 1. [2014-05-20 11:03:08] volans_update_system_time- RTC: 1400576142 / System Time: 1400576142 [2014-05-20 11:03:08] ERROR : select error [2014-05-20 11:03:08] [X_EVDEV] EvdevKbdRead.... RESET Ptr [2014-05-20 11:03:08] [POWER KEY @ KEY_LOCK_STATUS] [2014-05-20 11:03:08] [xEvent][Func:s3c6410DPMS] Before call udevmgr_set_lcd_backlight([RP][WARNING] : s3c_rp_resume.. already resume state [2014-05-20 11:03:08] 6) [2014-05-20 11:03:08] [DCM] lcd power on! [2014-05-20 11:03:08] [TSP] g_client->addr = 0x20 [2014-05-20 11:03:08] [TSP] g_client->addr = 0x20 [2014-05-20 11:03:08] [xEvent][Func:s3c6410DPMS] After call udevmgr_set_lcd_backlight(6) [2014-05-20 11:03:09] volans_battery_update_status- status: 2 / mV: 3831 / T: 30(216) / capacity: 37 / full counter: 0 / cable type: 0 / elapsed: 0 [2014-05-20 11:03:13] [STATUS=KEY_UNLOCK_STATUS] [2014-05-20 11:03:13] MMAP_ALLOC : virt addr = 0x00000000, phys addr = 0x51977000, size = 2097152 [2014-05-20 11:03:13] [2014-05-20 11:03:13] 3dm_alloc [ 1288 1311 F F F F F F F ] Alloc= 2 Free= 7 [2014-05-20 11:03:16] Available Count 8 [2014-05-20 11:03:16] [2014-05-20 11:03:16] 3dm_free [ 1288 F F F F F F F F ] Alloc= 1 Free= 8 [2014-05-20 11:03:39] volans_battery_update_status- status: 2 / mV: 3625 / T: 31(211) / capacity: 37 / full counter: 0 / cable type: 0 / elapsed: 0 [2014-05-20 11:03:57] ÿ |