SeeedStudio LinkIt Smart 7688 Duo
SeeedStudio LinkIt Smart 7688 Duo
Availability: now
FCC approval date: 16 October 2015
(Est.) release date: December 2015
(Est.) initial retail price (in USD): $16
Country of manuf.: China
Type: IoT, development board
FCC ID: Z4T-LINKITS7688D
Power: 5 VDC, 2 A
Connector type: USB Female Micro-B
CPU1: MediaTek MT7688AN (580 MHz)
CPU2: Atmel ATmega32U4 (8 MHz)
FLA1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Macronix MX25L25735FMI-10G)
FLA2: 32 KiB 0.0313 MiB <br />32,768 B <br />256 Kib <br />0.25 Mib <br />3.051758e-5 GiB <br /> (Atmel ATmega32U4)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5TU64M16HG-ACI)
RAM2: 2.5 KiB 0.00244 MiB <br />2,560 B <br />20 Kib <br />0.0195 Mib <br />2.384186e-6 GiB <br /> (Atmel ATmega32U4)
Expansion IFs: USB 2.0
USB ports: 1
JTAG: yes, 8-pad header
Serial: yes, (57600 8N1)
WI1 chip1: MediaTek MT7688AN
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL
ETH chip1: MediaTek MT7688AN
LAN speed: 100M
bgn
Additional chips
1A LDO Voltage Regulator;Torex;XC6220B;;1;
Stock bootloader: U-Boot 1.1.3 Ralink 4.3.0.0
Stock FW OS: Linux 3.18.21 OpenWrt 15.05 + linkit
Flags: Micro SD Card slot, I2C, I2S, SPI, UART, GPIO
Default SSID: LinkIt_Smart_7688_XXXXXX
Default IP address: 192.168.100.1
the IP 192.168.100.1 is used by 57 additional devices
of which 2 are SeeedStudio devices
Default login user: root
Default login password: change on install
root:change on install credentials used by 1 additional devices
of which 1 are SeeedStudio devices
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
SeeedStudio LinkIt Smart 7688 | MediaTek | MediaTek | |
SeeedStudio LinkIt Smart 7688 Duo | MediaTek | MediaTek |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
LinkIt Smart 7688 Duo
- Run OpenWrt for IoT Applications
Hardware specification
- CPU: MediaTek MT7688AN
- @580MHz (MIPS 24KEc)
- MCU: Atmel ATmega32U4
- Memory: 128MB (SDRAM) DDR2
- Onboard Storage: 32MB NOR,
- TF card (max.128GB)/MMC card
- Wi-Fi: 802.11bgn 1T1R
- USB: 1x USB 2.0 port
- Power Source: USB Female Micro-B