Senao WBR2100AFN
Senao WBR2100AFN
FCC approval date: 20 February 2013
Country of manuf.: Taiwan
Type: wireless router
FCC ID: U2M-WBR2100AFN
IC ID: 3616C-WBR2100AFN
Power: 5 VDC, 1 A
Connector type: barrel
CPU1: Atheros AR1321
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Eon Q32B-104HIP)
RAM1: ? MiB (Brand? Model?)
Expansion IFs: none specified
WI1 chip1: Atheros AR1321
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Atheros AR1321
Switch: Atheros AR1321
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 2 are Senao devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 2 are Senao devices
802dot11 OUI: none specified
FCC ID | |
---|---|
Enable Networks CR3000 | U2M-WBR2100AFN |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
"7016A056000f" is silkscreened on the board in the FCC photos.
The device, per the FCC photos, seems to be using the following...
- Atheros AR1321-AL1A WiSoC
- Eon Q32B-104HIP (4MB Flash)
Default credentials are per the FCC manual.
- The default SSID pattern shown in the manual is EnGeniusXXXXXX.