SerComm IP706ST

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

SerComm IP706ST
Availability: OEM

FCC approval date: 03 April 2003
Country of manuf.: Taiwan

Type: wireless router

FCC ID: P270K30

Power: 12 VDC, 0.8 A
Connector type: barrel

CPU1: Texas Instruments TNETW5305
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (ICSI Model? × 2)

Expansion IFs: none specified

WI1 chip1: Texas Instruments ACX100
WI1 802dot11 protocols: b
WI1 antenna connector: none

ETH chip1: Texas Instruments TNETW5305
Switch: ADMtek Model?
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

b

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 13 are SerComm devices

802dot11 OUI: none specified

For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.


Firmware v1109 (via archive.org)

The FCC test report specifies the CPU as the TNETW5305 (ARM7) and the Flash and RAM size as 1MB and 4MB respectively (with Can Expand noted after the values). It also specifies the Switch chip as a Atan 8995L / AT8985P or Marvell 88E6052.. but the FCC image shows the device with an ADMtek Switch.

The default IP for this device is from the FCC manual.

The default SSID may be default.