Siemens SS2624 v1
Siemens SS2624 v1
Manuf (OEM/ODM): SerComm IP716E
Amazon image
ASIN
B000068WOI (, On Amazon, On CCC, multiple uses)
multiple revisions of this device, use caution
Type: wireless router
Power: 12 VDC, 0.8 A
Connector type: barrel
CPU1: Samsung S3C4510B
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Hyundai HY29F800TT-70)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (ICSI IC42S16100-7T × 2)
Expansion IFs: PCMCIA (16-bit) (non-standard connector), Parallel
PCMCIA slots: 1
WI1 module: BroMax WM250
WI1 module IF: PCMCIA (16-bit) (non-standard connector)
WI1 chip1: Intersil ISL3873
WI1 chip2: Intersil ISL3685
WI1 802dot11 protocols: b
WI1 antenna connector: unknown, RP-SMA
ETH chip1: Samsung S3C4510B
ETH chip2: Realtek RTL8019AS
Switch: Kendin KS8995E
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
b
Default SSID: SpeedStream (4 addl. devices)
Default IP address: 192.168.254.254
the IP 192.168.254.254 is used by 11 additional devices
of which 7 are Siemens devices
802dot11 OUI: none specified
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Siemens SS2624 v1 | Samsung | Intersil | Intersil |
Siemens SS2624 v2 | Intersil | Intersil |
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Samsung chipsets with specifications, see Samsung.
The Siemens P/N on the label is 060-2624-001.
"4900FF10A" is silkscreened on the board in the FCC photos.
- There is an Attansic AT7601F printer port controller on-board.
- I am assuming the Flash used is a HY29F800TT-70..
The BroMax wireless module is using ISL3873IK.
- "3752-32500010" is silkscreened on the wireless module's board.
Router web interface screenshots
The wireless interface OUI may be 00:02:DD (BroMax).