Sitecom WL-330
Sitecom WL-330 v1
Availability: EoL
Manuf (OEM/ODM): Edimax EW-7415APn v1.0
Type: access point, range extender
FCC ID: NDD9574150902
Power: 12 VDC, 0.5 A
Connector type: barrel
CPU1: Ralink RT3052 (384 MHz)
FLA1: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320EBTI-70G)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (ESMT M12L128168A-6T)
Expansion IFs: none specified
Serial: yes, 4-pin header, 3.3V TTL, (57600 8N1), JP2
WI1 chip1: Ralink RT3052
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
ETH chip1: Ralink RT3052
LAN speed: 100M
LAN ports: 1
bgn
Default IP address: 192.168.0.234
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 7 are Sitecom devices
802dot11 OUI: none specified
FCC ID | |
---|---|
Black Box WAP-300BGN | NDD9574150902 |
Hawking HOWABN1 | NDD9574150902 |
Hawking HWABN1 rev 1 | NDD9574150902 |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless 802.11n Range Extender/Access Point
- "EW-7415APN V1.0A" is silkscreened on the top of the board.
- "1244-000000604-01Z" is silkscreened on the bottom of the board.
Serial
- Pinout
JP2 (TxD) (GND) (RxD) [3.3]
Serial runs at 57600 bps. U-Boot offers a small multiple choice menu - be quick.
Once booted, the device offers a terminal interface asking for `User Name:` and `Password:`. You can get out of this by visiting /wlanMP.asp (not linked from the interface anywhere) and submitting a shell escape to killall setup (which is the process asking you to log in). See image below for an example.
See also
Images