TP-LINK TL-WR702N v1.2

TP-LINK TL-WR702N v1.2

FCC approval date: 07 June 2012
(Est.) release date: 29 March 2012
UPC: 845973051785 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B007PTCFFW (, On Amazon, On CCC, multiple uses)
multiple revisions of this device, use caution

Type: access point

FCC ID: TE7WR702N

Power: 5 VDC, 1 A
Connector type: USB Female Micro-B

CPU1: Atheros AR9331
FLA1: 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (cFeon QH16-104HIP)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Zentel A3S28D40FTP-G5)

Expansion IFs: none specified

WI1 chip1: Atheros AR9331
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Atheros AR9331
LAN speed: 100M
LAN ports: 1

bgn

Stock FW OS: VxWorks

Default SSID: TP-LINK_XXXXXX (31 addl. devices)
Default IP address: 192.168.0.254
the IP 192.168.0.254 is used by 49 additional devices
of which 24 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 277 are TP-LINK devices

802dot11 OUI: 64:70:02 (9 E, 8 W), F8:D1:11 (6 E, 6 W)
Ethernet OUI: 64:70:02 (9 E, 8 W), F8:D1:11 (6 E, 6 W)

	FCC ID
TP-LINK TL-WR702N v1.0	TE7WR702N

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
TP-LINK TL-WR702N v1.0	Atheros	Atheros
TP-LINK TL-WR702N v1.2	Atheros	Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

---

Product page

"2050500200" and "Rev:1.0" is silkscreened on the board of a few production model units.. as well as the FCC EUT.

The same text is found on the Proware PW-RN401M EUT in its FCC filing.

Additional external links

• On the OpenWrt wiki

newer revision units may have only 8 MB of RAM

Images

• 
• 
• 
• 

Boot log

This sequence will be needed to initiate PLL and RAM:

• boot log

reboot Reset_1 ________ ________ __ __ ____ _ __ ___ |________|| ___ | | | | || \ | || | / / | | | |___| | __ __ | | | || \| || |/ / | | | _____| |__ __| | |___ | || |\ || \ |__| |__| |______||__||_| \____||__|\___\ Software Platform for MIPS Creation date: Aug 24 2011, 18:58:10 (chenyunchuan@tp-link.net) Copyright(C) 2001-2010 by TP-LINK TECHNOLOGIES CO., LTD. CPU: AR9330: AP121 Board CPU freq: 400 MHZ SDRAM size: 8 MB ipaddr:192.168.1.1 serverip:192.168.1.100 file:vxWorks.img Attaching interface lo0... done Rx clbufs 768 each of size 1756 eth_rx_netpool_init: allocated, pDmaBuf=0x80637910, buffend = 80782514 ATHRS26: resetting s26 ATHRS26: s26 reset done eth_rx_netpool_init: done already! Attached IPv4 interface to mirror unit 0 Press Ctrl+C to stop auto-boot... 1 0 auto-booting... Uncompressing...done Starting at 0x80001000... Attaching interface lo0... done Rx clbufs 768 each of size 1756 eth_rx_netpool_init: allocated, pDmaBuf=0x80e20960, buffend = 80f6b564 ATHRS26: resetting s26 ATHRS26: s26 reset done eth_rx_netpool_init: done already! Attached IPv4 interface to mirror unit 0 usrAppInitEx: 137: GPIO_OE = c00081d usrAppInitEx: 138: CP0 CONFIG = 80208483 usrAppInitEx: 139: CP0 CONFIG1 = 9ee3519e -->starting wireless... APCFG task id 80c5e450 sysWlanInit ... Create WLAN event task tWLANEventTask Create mem partion 0x80c3fc20 for size 73728 Boostrap clock 25MHz ar9300RadioAttach: Need analog access recipe!! Restoring Cal data from Flash ant_div_control1 = 0x9 ath_get_caps[4303] rx chainmask mismatch actual 1 sc_chainmak 0 ath_get_caps[4278] tx chainmask mismatch actual 1 sc_chainmak 0 Create OS_MESGQ Successfully at 0x80c14c60 osifp->queue_head = 0x80c14f60 ag7240MemInit: allocated, dmabuf=0x80b4e2c0, buffend = 80c071c4 Entering Task Loop Entering WLAN event Task Loop LAN Port Interface type is 0x4c04 -->wps is shutdown! ERROR:wireless OR ACL disable sending message 80b2f540,24 TDDP: Now listening client request. tddp is running. wmosSemMCreate() pMud->mudDataSem:-2135960768 Software Platform for MIPS Copyright(C) 2001-2010 by TP-LINK TECHNOLOGIES CO., LTD. Creation date: Mar 14 2013, 11:00:05 # Starting WLAN !!!! AP_STARTMODE=standard AP_ENABLE=1 ATH_COUNTRYCODE=840 wlan_vap_create : enter. devhandle=0x803c6430, opmode=IEEE80211_M_HOSTAP, flags=0x1 wlan_vap_create : exit. devhandle=0x803c6430, opmode=IEEE80211_M_HOSTAP, flags=0x1. osif_ioctl_create_vap: vap 0x80ffe960 vap->iv_unit 0 ieee80211_end_load: load done ath0 end flag = 0x00028802 default default default IEE80211-FREQ IOCTL vap 0x80ffe960 0,0,0 AP_CHMODE=11NGHT40PLUS WLAN IOCTL AP_CHMODE=11NGHT40PLUS=11NGHT20=11NGHT40PLUS=1003 IEE80211-MODE IOCTL 1,11NGHT40PLUS,13 set mode 11,-2130709148,6 set mode retv 0 WLAN IOCTL AP_PRIMARY_CH=auto=1=auto=1002 IEE80211-FREQ IOCTL vap 0x80ffe960 0,0,11 WLAN IOCTL PUREG=0=0=0=1004 IEEE80211-SETPURGE IOCTL 0 WLAN IOCTL AP_HIDE_SSID=0=0=0=1005 IEEE80211-SETHIDESSIDIOCTL 0 WLAN IOCTL AP_ISOLATION=0=0=0=1034 IEE80211-setparam-nobridge 0 WLAN IOCTL AP_TX11NRATE==0=0=1041 set auto rate WLAN IOCTL AP_11G_PROTECTION==0=0=1042 WLAN IOCTL AP_BEACON_INTERVAL=100=100=100=1043 WLAN IOCTL AP_FRAGMENT_THRESHOLD=2346=2346=2346=1044 WLAN IOCTL AP_RTS_THRESHOLD=2346=2347=2346=1046 WLAN IOCTL AP_DTIM_PERIOD=1=1=1=1045 WLAN IOCTL AP_WMM_ENABLE=1=1=1=1051 WLAN IOCTL AP_WMM_NOACK==0=0=1052 IOCTL set wmm noack 0 WLAN IOCTL AP_CYPHER_2==CCMP=CCMP=1000 Get EIOCGADDR WLAN IOCTL AP_NO_EDGE_CH==0=0=1056 WLAN IOCTL AP_MCASTRATE==0=0=1018 WLAN IOCTL AP_MACFILTER_MODE==0=0=1038 WLAN IOCTL AP_MACFILTER_LIST====1000 Get EIOCGADDR WLAN IOCTL AP_SHORT_GI=1=1=1=1055 WLAN IOCTL AP_DISABLECOEXT=1=0=1=1075 WLAN IOCTL AP_SSID=TP-LINK_3C11AA=Hornet_test_xxxxxxx=TP-LINK_3C11AA=1001 IEE80211-ESSID IOCTL 1,TP-LINK_3C11AA,15 AP_CHMODE=11NGHT40PLUS AP_CWMMODE=1 IEE80211-CWMMODE IOCTL 1 AP_AMPDU=0 AP_PURE_N=0 AP_TX_CHAINMASK=1 AP_RX_CHAINMASK=1 AP_SECMODE=WPAWPA2 WPS_ENABLE=0 Security Mode: WPAWPA2 AP_MACFILTER_MODE=0 ieee80211_open FIXME: ar9300GetMinCCAPwr FIXME: ar9300GetMinCCAPwr FIXME: ar9300GetMinCCAPwr FIXME: ar9300GetMinCCAPwr FIXME: ar9300GetMinCCAPwr FIXME: ar9300GetMinCCAPwr FIXME: ar9300GetMinCCAPwr FIXME: ar9300GetMinCCAPwr FIXME: ar9300GetMinCCAPwr FIXME: ar9300GetMinCCAPwr ar9300LoadNF: *** TIMEOUT while waiting for nf to load: AR_PHY_AGC_CONTROL=0x1d0d5a *** WLAN IOCTL AP_BASICRATES====1039 WLAN IOCTL AP_DEBUG=0==0=1062 WLAN IOCTL AP_TX_POWER====1073 Starting Hostapd AP_SSID=TP-LINK_3C11AA AP_HOSTAPD_DEBUG= AP_IPADDR=192.168.1.2 AP_SECMODE=WPAWPA2 WPS BSS init WPS_ENABLE=0 AP_SECMODE=WPAWPA2 WPAWPA2 BSS init WPA BSS init PSK_KEY=B33C11AA AP_CYPHER=CCMP TKIP AP_WPA_GROUP_REKEY=3600 starting hostapd ... Hostapd task Created 80acb2a0 Task details [80acb2a0,,64,80c5e1e8] Adding ath0 in bridge ... default Set EIOCGMIB2 default Entering Hostapd Main default Set EIOCGMIB2 attached backend socket . Attached backend socket for eth0 Attached backend socket for eth1 Attached backend socket for mirror 0 @@@@ kris-hostapd vapid=0 @@@@@ wiface=ath0 @@@@ **** [2,1,0,1192.168.1.2,]**** Just before eloop_run() *** setup interface1 started **** Eapol sockfd=24 Get EIOCGADDR MAC address 64,66,ffffffb3,3c,11,ffffffaa link _ubind0,0,0,0,0,0 IEE80211-IWMODE IOCTL 3 IEE80211-setparam-privacy 0 1136073607.516667: Defaulted uuid based on mac addr 64:66:b3:3c:11:aa ieee80211_ioctl_setappiebuf ieee80211_ioctl_setappiebuf ieee80211_ioctl_setappiebuf Madwifi init completed *** setup interface1 completed **** *** setup interface2 started **** IOCTL setmlme [ieee80211_ioctl_setmlme:1907] data=0x80acadc0,data->pointer=0x80acae10, data->length=42 [ieee80211_ioctl_setmlme:1913] mlme->im_op=3 IEE80211-setparam-privacy 0 ieee80211_ioctl_delkey : idk_keyix=0 ieee80211_ioctl_delkey : idk_keyix=1 ieee80211_ioctl_delkey : idk_keyix=2 ieee80211_ioctl_delkey : idk_keyix=3 Using interface ath0 with hwaddr 64:66:b3:3c:11:aa and ssid 'TP-LINK_3C11AA' IEE80211-ESSID IOCTL 1,TP-LINK_3C11AA,15 osif_vap_init :vap up IEE80211-setparam-mcastcipher 1 Warning: wlan_set_mcast_cipher failed. cache the mcast cipher IEE80211-setparam-unicipher 10 Warning: wlan_set_ucast_cipher failed. cache the ucast cipher IEE80211-setparam-keymgmtalgs 2 ieee80211_rsncaps IEE80211-setparam-wpa 3 set IEEE80211_IOC_WPA to WPA and RSN [ieee80211_ioctl_setparam_wpa:1741] IEE80211-setparam-authmode 5 osif_vap_init :vap up osif_vap_init 0 ieee80211_ioctl_setkey ieee80211_ioctl_setkey: ******** SETKEY : error: 0 , key_type=1, macaddr=ff:ff:ff:ff:ff:ff, key_len=16 IEE80211-setparam-privacy 1 hostapd_ctrl_iface_init ****setup interface2 completed**** ****setup interface finalized ****