TP-LINK TL-WR940N v1.x
TP-LINK TL-WR940N v1.x
Availability: common
FCC approval date: 28 June 2012
Country of manuf.: China
Series: N300
Type: wireless router
FCC ID: TE7WR940N, TE7WR941NXV4
Power: 9 VDC, 0.85 A
Connector type: barrel
CPU1: Atheros AR7240 (400 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Winbond W25Q32BVSIG)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Zentel A3S56D40FTP-G5)
Expansion IFs: none specified
WI1 chip1: Atheros AR9283
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Atheros AR7240
Switch: Atheros AR7240
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: TP-LINK_XXXXXX (31 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 109 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 277 are TP-LINK devices
| FCC ID | |
|---|---|
| TP-LINK TL-WR941ND v4.x | TE7WR941NXV4 TE7WR940N |
| FCC ID | |
|---|---|
| TP-LINK TL-WR941ND v3.x | TE7WR941NXV4 |
| TP-LINK TL-WR941ND v4.x | TE7WR941NXV4 TE7WR940N |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| TP-LINK TL-WR940N v1.x | Atheros | Atheros | |
| TP-LINK TL-WR940N v2.x | Atheros | Atheros | |
| TP-LINK TL-WR940N v3.x | Qualcomm Atheros | Qualcomm Atheros | |
| TP-LINK TL-WR940N v4.x | Qualcomm Atheros | Qualcomm Atheros | |
| TP-LINK TL-WR940N v6.x | Qualcomm Atheros | Qualcomm Atheros |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
300Mbps Wireless N Router
The FCC ID is not valid. Additionally, there is a new FCC filing under ID: TE7WR940N
- (IC ID: 8853A-WR940N) for this same model (but perhaps not the same version).
The device is the same as the TP-LINK TL-WR941ND v4.x (minus the antenna
- configuration, N = integral antennas, ND = removable antennas).
The device uses an AR7240 (AR7240-AH1A) for the CPU and an AR9283.
- While the device does have 3 antennas, it only has 2T2R capability (the left
- and middle antennas appear to be used in a switched diversity configuration).
The default SSID is TP-LINK_XXXXXX where XXXXXX
- is the last three octets of the WLAN MAC address.
Images
From TP-LINK
front
angled
back
Board shots
BQ, BL board top, shield removed
under the shield closeup
Flash W25Q32BVSIG
unreadable AR7240 top
