TRENDnet TEW-651BR V2.xR
TRENDnet TEW-651BR V2.xR
Manuf (OEM/ODM): Cameo WLN-2219
Amazon image
ASIN
B0032L85J2 (
, On Amazon, On CCC, multiple uses)
multiple revisions of this device, use caution
Type: wireless router
FCC ID: XU8TEW651BRV2
Power: 5 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8196C (390 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25L3206EM2I-12G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (ESMT M12L2561616A-6T)
Expansion IFs: none specified
Serial: yes, (38400,8,N,1)
WI1 chip1: Realtek RTL8188RE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Realtek RTL8196C
Switch: Realtek RTL8196C
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Stock FW OS: Linux
Flags: boot log
Default SSID: TRENDnet651 (1 addl. devices)
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 119 additional devices
of which 45 are TRENDnet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 49 are TRENDnet devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| TRENDnet TEW-651BR V1.0R | Realtek | Realtek | |
| TRENDnet TEW-651BR V2.xR | Realtek | Realtek |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
This device would seem to be a Cameo WLN-2219.
Images
from a V2.1R
- external
angled
front panel
bottom
label
back
power adapter
- internal
board top
SoC
Flash
RAM
RTL8188RE
board bottom
Serial
Pinout
Silkscreened UART text <- [VCC] (TX) (RX) (GND)
Boot log
Booting... ========== SPI ============= ---RealTek(RTL8196C)at 2010.11.15-16:43+0800 version v1.1f [16bit](390MHz) no sys signature at 00010000! no sys signature at 00020000! no sys signature at 00030000! no rootfs signature at 000E0000! no rootfs signature at 000F0000! no rootfs signature at 00130000! no rootfs signature at 00100000! no rootfs signature at 00110000! Jump to image start=0x80500000... decompressing kernel: Uncompressing Linux... done, booting the kernel. done decompressing kernel. start address: 0x800034c0 RTL8192C/RTL8188C driver version 1.4 (2010-08-11) init started: BusyBox v1.13.4 (2010-11-09 16:26:59 CST) # [ 41 ncc_runtimecfg.c : 274 initRunTimeCfg()]:::Init Run-Time Config S uccess. [ 41 ncc_runtimecfg.c : 275 initRunTimeCfg()]:::Total 645 nodes, each no de 24 bytes. [ 41 ncc_runtimecfg.c : 276 initRunTimeCfg()]:::Total 15480 byte for all nodes. [ 41 ncc_runtimecfg.c : 277 initRunTimeCfg()]:::Total 11346 byte for dat a. [ 41 ncc_runtimecfg.c : 279 initRunTimeCfg()]:::Ncc pid is 41. [ 41 ncc_runtimecfg.c : 72 loadCfg()]:::Start loadCfg [ 41 ncc_lz77.c : 525 flash2rootfs()]:::Load Success(/var/tmp/cf g.txt) [ 41 ncc_inf.c : 230 ncc_inf_main()]:::ncc_inf_main pid is 41. [ 41 leobox_network.c : 983 socket_select()]:::Enter pid=41,ppid=1 [ 46 leobox_network.c : 746 socket_select_hdlr()]:::create new process pid =46,ppid=45 socket: Address family not supported by protocol [ 51 ncc_main.c : 33 sendBootEvent()]:::pid = 51 mini_httpd: started as root without requesting chroot(), warning only [ 41 ncc_fsm_boot.c : 309 TEW_651BR_Boot()]:::Before Lan Start!! [ 41 ncc_snmpd.c : 172 snmpdOp()]:::st is null. killall: lld2d: no process killed [ 41 ncc_fsm_boot.c : 315 TEW_651BR_Boot()]:::After Lan Start!! Mon Feb 27 09:18:02 UTC 2012 [ 41 ncc_fsm_boot.c : 324 TEW_651BR_Boot()]:::Before syslogd Start!! [ 41 ncc_fsm_boot.c : 328 TEW_651BR_Boot()]:::After syslogd Start!! WiFi Simple Config v1.19 (2010.08.20-16:42+0000). killall: crond: no process killed
